Capillary Electrophoretic Determination of Citalopram in Pharmaceutical Tablets and Serum

Determination of citalopram by capillary electrophoresis is described. Compounds were separated at 28 kV in 75 μm i.d. fused silica capillary tubing (total length 85 cm, effective length 65 cm) with 10 mM borate buffer, pH 8.5, containing 10% (v/v) methanol as running buffer. Citalopram and propylparaben (IS) appeared at 3.5 and 5.5 min, respectively. Repeatable linear results were obtained. The limits of detection and quantification were 5.73 × 10⁻⁶ and 1.72 × 10⁻⁵ M, respectively. When citalopram was determined in a pharmaceutical tablet by capillary electrophoresis and by a UV-spectrophotometric method differences between the results were not significant. The citalopram content of tablets was 100.8 ± 2.95% of the label claim. The amount found in serum was 26.7 ± 0.1% of the free drug, indicating that 73.3% of the drug was bound to protein.     

Determination of total antioxidant capacity by a new spectrophotometric method based on Ce(IV) reducing capacity measurement

Dietary antioxidants widely found in fruits and vegetables may serve the task of reducing oxidative damage in humans induced by free radicals and reactive oxygen species under ‘oxidative stress’ conditions. The aim of this work is to develop a simple, low-cost, sensitive, and diversely applicable indirect spectrophotometric method for the determination of total antioxidant capacity of several plants. The method is based on the oxidation of antioxidants with cerium(IV) sulfate in dilute sulfuric acid at room temperature. The Ce(IV) reducing capacity of the sample is measured under carefully adjusted conditions of oxidant concentration and pH such that only antioxidants and not other organic compounds would be oxidized. The spectrophotometric determination of the remaining Ce(IV) was performed after completion of reaction with antioxidants. Quercetin and gallic acid were used as standards for flavonoids and phenolic acids, respectively, and results of antioxidant measurements were reported as trolox equivalents. The developed procedure was successfully applied to the assay of total antioxidant capacity due to simple compounds such as trolox, quercetin, gallic acid, ascorbic acid, catechin, naringin, naringenin, caffeic acid, chlorogenic acid, ferulic acid, and p-coumaric acid, and due to phenolic acids and flavonoids in the arieal parts of nettle (Urtica Dioica L.). Blank correction of significantly absorbing plant extracts at 320 nm could be made with the aid of spectrophotometric titration. Plant selection was made in respect to high antioxidant content, and extraction was made with water. The proposed method was reproducible, and the trolox equivalent antioxidant capacities (TEAC coefficients) of the tested antioxidant compounds were correlated to those found by reference methods such as ABTS and CUPRAC. Since the TEAC coefficients found with the proposed method of naringin-naringenin and rutin-catechin pairs were close to each other, this Ce(IV)-based assay probably caused the simultaneous hydrolysis of flavonoid glycosides to the corresponding aglycones and their subsequent oxidation such that the hydrolysis products exhibed antioxidant capacities roughly proportional the number of -OH groups contained in a molecule.     

Investigation of the scope of a new route to ABCD-bilanes and ABCD-porphyrins

A new route to bilanes and porphyrins bearing four distinct meso substituents has been studied to elucidate the scope and gain entry to previously inaccessible compounds. The route entails (i) synthesis of a 1-bromo-19-acylbilane by acid-catalyzed condensation of a 1-acyldipyrromethane and a 9-bromodipyrromethane-1-carbinol and (ii) intramolecular cyclization of the 1-bromo-19-acylbilane in the presence of a metal salt (MgBr2, 3 mol equiv) and a non-nucleophilic base (DBU, 10 mol equiv) in a noncoordinating solvent (toluene) at 115 degrees C exposed to air to afford the corresponding magnesium(II) porphyrin. In this study, two sets of bilanes were initially prepared to explore substituent effects. In the first set, all bilanes vary only in the nature of the substituent at the 10-position. In the second set, all bilanes vary only in the nature of the substituent attached to the acyl unit (the 20-position). The substituents examined at the 10- and 20-positions include alkyl, aryl (electron-rich, electron-deficient, hindered), heteroaryl, ester, or no substituent (-H). The bilanes were obtained in 35-87% yield, and the target porphyrins in up to 60% yield. Further study of the scope focused on bilanes and porphyrins bearing three heterocyclic substituents (o-, m-, p-pyridyl) or four alkyl groups (ethyl, propyl, butyl, pentyl), in which case microwave irradiation was used for the porphyrin-forming step. Altogether, 17 bilanes and 19 porphyrins were prepared and characterized. In summary, the new route provides access to meso-substituted bilanes and porphyrins for which access is limited via other methods.     

The role of external polyamines on photosynthetic responses, lipid peroxidation, protein and chlorophyll a content under the UV-A (352nm) stress in Physcia semipinnata

Physcia semipinnata was exposed to UV-A (352nm) and visible light (210, 800 and 2000mW/cm2) for 30min, 1, 2, 24, and 48h to seek the alterations in the PSII photosynthetic quantum yield, in response to radiation. Chlorophyll a fluorescence did not influence exposure to light, 210, 800 and 2000mW/cm2. Significant alterations of the photosynthetic quantum yield ratio occurred in response to increase in UV-A exposure time. The photosynthetic quantum yield ratio decreased in P. semipinnata following exposure to UV-A for 24 and 48h. The thalli of P. semipinnata treated with 1mM polyamine were not influenced during the exposure to UV-A for 24 and 48h. It was also found that exogenously spd added samples had higher chla content than spm and put added samples. In this study, we showed that lipid peroxidation levels between UV-A-treated samples and exogenously polyamine treated samples that were previously exposed to UV-A for 24 and 48h were significantly decreased. This result is the first record to indicate that external polyamines might have some protective role on photosystem II and membrane against UV-A stress.     

Synthesis,characterization, optimum reaction conditions,and some polymer–metal complexes of poly(phenoxy-imine)s containing furan ring

In this study, Schiff bases containing azomethine (–HC=N–) compounds were synthesized from the condensation reaction of 4-aminophenol and 2-aminophenol and 5-methyl-2-furaldehyde. Orange-colored Schiff bases, 4-[(5-methyl- 2-furyl) methyleneamino] phenol (4MFMAP) and 2-[(5-methyl-2-furyl) methyleneamino] phenol (2MFMAP) turned to poly-4-[(5-methyl-2-furyl) methyleneamino] phenol (P-4MFMAP) and poly-2-[(5-methyl-2-furyl) methyleneamino] phenol (P-2MFMAP) polyazomethine derivatives by NaOCl oxidant in alkaline aqueous medium. In addition, poly-2-[(5-methyl-2-furyl) methyleneamino] phenol cobalt (II) and copper (II) complexes were synthesized. FTIR and NMR measurements for structural analysis of the synthesized compounds, UV–Vis analysis for optical properties, electrical conductivity measurements, and thermal analysis with the TG–DTA techniques were determined. The yield of P-4MFMAP and P-2MFMAP was found to be 84.6% and 78.6 as follows [4MFMAP] = 0.066, [KOH] = 0.198 [NaOCl] = 0.066 mol L^?1 at 60 °C for 3 h and [2MFMAP] = 0.066, [KOH] = 0.132 [NaOCl] = 0.066 mol L^?1 at 70 °C for 3 h, respectively.     

N-phosphorylation of pyrroles: An intramolecular migration reaction

A new synthetic method is reported for the N-phosphorylation of pyrroles via intramolecular migration of a phosphonate diester group. The reaction proceeds under mild conditions and produces N-phosphorylated pyrrole derivatives in moderate to good yields.     

Synthesis,Characterization, Crystal and Molecular Structure of 1,5‐Dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine

The reaction of 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐one ( 3 ) with an alkylamine (butylamine, hexylamine or ethylenediamine) yields, quite unexpectedly and in the absence of catalyst, the novel compound 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine ( 4 ) as the sole, analytically pure, solid product, which was fully characterized. The structure of 4 was unequivocally solved by single‐crystal X‐ray‐diffraction analysis. The compound crystallizes in a monoclinic cell (space group P 2₁/c), with two molecules in the asymmetric unit, held together by intermolecular H‐bonds. Compound 4 could be interesting as a bi‐ or even tridentate ligand, and exhibits a strong fluorescence upon excitation at 310 nm. A mechanism, based on the observed C? N bond cleavage, is proposed.     

Design,synthesis, characterization and antimicrobial evaluation of some novel hydrazinecarbothioamide, 4-thiazolidinone and 1,2,4-triazole-3-thione derivatives

A series of novel hydrazinecarbothioamide ( 5a,c,f ), 4-thiazolidinone ( 6a - e ), and 1,2,4-triazole-3-thione ( 7a - d ) were designed and synthesized. The structural elucidations of the novel compounds were performed by IR, ¹H-NMR, ¹³C-NMR, mass and elemental analysis. All novel derivatives were evaluated for their antibacterial and antifungal activities against nine diverse microorganisms. According to the biological activity studies of the compounds, 6d , 7c and 7d displayed hope promising antibacterial activity. Furthermore, 6d displayed potent antifungal activity. Consequently, the obtained results revealed that 6d , 7c and 7d present a leading structure for future drug development due to its straightforward synthesis and relevant bioactivity.     

Stereospecific synthesis of novel methyl-substituted mono- and di-methoxy conduritols

Methyl-monomethoxy conduritol-B and methyl-dimethoxy conduritol-B were synthesized starting from 2-methylbenzo-1,4-quinone. Bromination of 2-methylbenzo-1,4-quinone was followed by the reduction of the carbonyl groups with NaBH₄ to give a dioldibromo compound. Methyl-dimethoxy conduritol-B was synthesized from the reaction of the dioldibromo compound with CH₃ONa, followed by acetylation with Ac₂O-pyridine to obtain methyl-dimethoxy diacetate. On the other hand, acetylation of the methyl-dioldibromo compound followed by reaction with LiOH gave a monoepoxide compound stereoselectively. The reaction of the epoxide with H⁺/Ac₂O afforded the monobromo triacetate. Controlled reaction of monobromo-triacetate with CH₃ONa in MeOH furnished the desired new methyl-monomethoxy conduritol-B. The structures of all synthesized compounds were characterized by spectroscopic methods.     

An LC Method for the Determination of Bupropion and Its Main Metabolite,Hydroxybupropion in Human Plasma

A new LC method has been developed and validated for the direct determination of bupropion and its main metabolite, hydroxybupropion in human plasma. Plasma samples were analyzed after a simple, one step protein precipitation with trichloroacetic acid using a C₈ column and mobile phase, consisting of methanol/acetonitrile/phosphate buffer (10 mM, pH 3.0) (40:10:50, v/v/v) and 20 mM 1-heptane sulfonic acid sodium salt with carbamazepine as the internal standard. UV detection was performed at 214 and 254 nm. The method was validated over the concentration range of 60–2,400 and 150–4,700 ng mL⁻¹ for bupropion and hydroxybupropion, respectively. The intra- and inter-day assay variability was less than 15% for the two analytes. Limit of detection values were 24.8 and 63.4 ng mL⁻¹ for bupropion and hydroxybupropion, respectively. The method developed was applied to quantification of bupropion and hydroxybupropion in human plasma.