Determination of Folic Acid by CE in Various Cultivated Variety of Lentils

A simple extraction and determination method for folic acid (FA) in lentil samples was developed employing capillary electrophoresis. The analysis was performed in a 75 μm ID fused silica capillary using a running buffer of 10 mM sodium borate (10%, v/v, methanol, pH 9) at +18 kV and a detection wavelength at 200 nm. Methylparaben was used as the internal standard. FA signal response was linear in the range between 1.2 × 10^?5 and 4.8 × 10^?5 M. Limit of detection (inter-day) was determined at 6.12 × 10^?7 M (3.3 σs^?1). The amount of FA found in green, red and mignon lentils was found to range between 0.408 and 0.742 mg g^?1.     

Complexation of metal ions with the novel azathia crown ethers carrying anthracene pendant in acetonitrile–dichloromethane

A series of crown ethers carrying an anthracene group with nitrogen–sulfur donor atom, which differ in having three, four and five sulfur atoms in the macrocycle was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl-anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile–dichloromethane (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Cu²⁺, Hg²⁺ and Pb²⁺ the results of which disclosed the complexation compositions and complex stability constants of the novel ligands with these cations. The monoazapentathia crown ether showed sensitivity for Al³⁺ with linear range and detection limit of 2.6 × 10⁻⁶ M–2.6 × 10⁻⁵ M and 8.1 × 10⁻⁷ M, respectively.     

Comparison of pre-irradiation and mutual grafting of 2-chloroacrylonitrile on cellulose by gamma-irradiation

Radiation-induced graft polymerization is one of the best methods for obtaining materials with new properties. In this work, radiation grafting of 2-chloroacrylonitrile to cellulose by mutual and pre-irradiation grafting methods was investigated. The grafting yield was enhanced by applying the emulsion grafting method. The grafting yield determined in the above systems was observed as 27% at highest and 6% at lowest. The effects of concentration of monomer, reaction time and reaction temperature on grafting yield were studied. Evidence of grafting has been based on the comparative studies of cellulose and grafted cellulose by infrared spectroscopy, thermal analysis and contact angle measurement. Grafting enhances thermal stability of cellulose backbone.     

Determination of Total Antioxidant Capacity by a New Spectrofluorometric Method Based on Ce(IV) Reduction: Ce(III) Fluorescence Probe for CERAC Assay

A Ce(IV)-based reducing capacity (CERAC) assay was developed to measure the total antioxidant capacity (TAC) of foods, in which Ce(IV) would selectively oxidize antioxidant compounds but not citric acid and reducing sugars which are not classified as antioxidants. The method is based on the electron-transfer (ET) reaction between Ce(IV) ion and antioxidants in optimized acidic sulphate medium (i.e., 0.3 M H₂SO₄ and 0.7 M Na₂SO₄) and subsequent determination of the produced Ce(III) ions by a fluorometric method. The fluorescent product, Ce(III), exhibited strong fluorescence at 360 nm with an excitation wavelength of 256 nm, the fluorescence intensity being correlated to antioxidant power of the original sample. The linear concentration range for most antioxidants was quite wide, e.g., 5.0 × 10⁻⁷–1.0 × 10⁻⁵ M for quercetin. The developed procedure was successfully applied to the TAC assay of antioxidant compounds such as trolox, quercetin, gallic acid, ascorbic acid, catechin, naringin, naringenin, caffeic acid, ferulic acid, glutathione, and cysteine. The proposed method was reproducible, additive in terms of TAC values of constituents of complex mixtures, and the trolox equivalent antioxidant capacities (TEAC coefficients) of the tested antioxidant compounds gave good correlations with those found by reference methods such as ABTS and CUPRAC.     

Synthesis and Spectroscopic Characterization of Fluorescent Boron Dipyrromethene-Derived Hydrazones

Derivatives of 4,4-difluoro-4-bora-3a,4a,diaza-s-indacene (BODIPY? or BDP) that possess a hydrazine substituent on position 5 are potential "turn-on" fluorophores for labeling aldehydes The unnatural amino acid L-3-formyltyrosine can be incorporated into a protein or peptide; thus, these hydrazines are potentially site specific labels for such polymers. In this work, model compounds were synthesized to assess whether the photochemical properties of the BDP-hydrazone would be suitable for protein labeling. Hydrazones were synthesized from the fluorophore 3-chloro-5-hydrazino-BDP and different aldehydes, and the absorption and emission spectra of the products were compared. The hydrazone of an unsubstituted aromatic aldehyde displays absorption and emission maxima (531 nm and 559 nm, respectively in dioxane) that are red shifted relative to those of a hydrazone from an aliphatic aldehyde (513 nm and 543 nm, respectively, in dioxane) and an increased quantum yield (0.21 vs. 0.11, respectively, in dioxane). The presence of a hydroxyl group ortho- to the aldehyde produces a hydrazone in which the absorption and emission maxima are slightly red shifted (528 nm and 564 nm, respectively in dioxane) from the unsubstituted aromatic hydrazone, but the quantum yields of the two hydrazones are equivalent. Thus, an ortho-hydroxy substituted aromatic aldehyde is a suitable electrophile for "turn on" protein labeling using the hydrazino-BDP. The specificity of this labeling reaction for the unnatural amino acid was demonstrated through fluorescent labeling of just the 3-formyltyrosine-containing α-subunit of α,β-tubulin.     

Preservation of beech and spruce wood by allyl alcohol-based copolymers

Allyl alcohol (AA), acrylonitrile (AN), methyl methacrylate (MMA), monomers and monomer mixtures AA+AN, AA+MMA were used to conserve and consolidate Beech and Spruce. After impregnation, copolymerisation and polymerisation were accomplished by gamma irradiation. The fine structure of wood+polymer(copolymer) composites was investigated by Scanning Electron Microscopy (SEM). It was observed that copolymer obtained from AA+MMA monomer mixture showed the optimum compatibility. The compressional strength and Brinell Hardness Numbers determined for untreated and treated wood samples indicated that the mechanical strength of wood+copolymer composites was increased. It was found that the mechanical strength of the wood samples containing the AA+MMA copolymer was higher than the others. In the presence of P(AA/MMA), at highest conversion, the compressive strength perpendicular to the fibres in Beech and Spruce increased approximately 100 times. The water uptake capacity of wood+copolymer composites was observed to decrease by more than 50% relative to the original samples, and biodegradation did not take place.     

Performance of amperometric alcohol electrodes prepared by plasma polymerization technique

A single-layer alcohol electrode was prepared by plasma polymerization technique. Ethylenediamine was used to incorporate amino groups on tract-etched polycarbonate membranes in glow discharge reactor. In order to determine the plasma polymerization parameters (discharged power, monomer flow rate, exposure time) on membrane permeability, hydrogen peroxide was used as tracer. The single-layer alcohol electrode that was produced by 0.6% (w/v) of alcohol oxidase (AOx) solution on the polycarbonate membrane, which was modified at 30 W, 20 ml/min monomer flow rate and 15 min exposure time, was selected for optimum performance. Sensitivity, linearity and response time of that particular layer were 5.6 nA/mM, 2 mM and 50 s, respectively. The performance of the amperometric alcohol electrode was tested on commercial alcoholic beverages.     

Syntheses,characterization of and studies on the electrochemical behaviour of ferrocenyl dithiophosphonates and 4-methoxyphenyl dithiophosphonates

Some 1,3-dithiadiphosphetane 2,4-disulfides (X₂P₂S₄, X: Fc, FcLR; X: CH₃O?C₆H₄?, LR) were allowed to react with alcohols to obtain dithiophosphonic acids (X(OR)PS₂H). These were converted to the corresponding ammonium salts. The salts were of the structures [Fc(OR)PS₂]^?[NH₄]⁺, R: 3-methyl-1-butyl- for I; 1-phenyl-1-propyl- for II; 3-pentyl- for III; 3-phenyl-1-propyl- for IV and [CH₃O?C₆H₄(OR)PS₂]^?[NH₄]⁺, R: 3-methyl-1-butyl- for V and 1-phenyl-1-propyl- for VI. To the best of our knowledge, all the compounds except V were prepared for the first time.

The compounds synthesized were characterized by elemental analysis, NMR (¹H, ¹³C, ³¹P), MS, FTIR, and Raman spectroscopies. Electrochemical behaviors of I–VI at disposable pencil graphite electrode (PGE) were investigated by using cyclic voltammetry (CV) and square-wave voltammetry (SWV). Adsorption and diffusion patterns of all the compounds on the PGE were also studied.

Two electroactive groups were identified in the compounds I–IV and only one in V and VI. The ferrocenyl groups of I-IV were oxidized at around 0.4 V. The same compounds display a second, more intense CV band at 0.8 V. The corresponding band for the compounds V–VI appears at around 0.6 V with a much weaker intensity. It is suggested that the ferrocenyl group introduced into the structures stabilizes the radical species formed as the product of the oxidation of the dithiophosphonato group.