Hyperfine structure in the configuration 4f 115d6s 2 of Er I

Hyperfine constants of low lying levels of the configuration 4f ¹¹5d6s ² in Er I have been measured for the only stable odd isotope,¹⁶⁷Er, using high resolution laseratomic-beam spectroscopy. Hyperfine parameters were evaluated from the experimental data using the effective tensor operator formalism. For this purpose eigenfunctions have been determined from an analysis of the fine structure energies of Er I as well as from ab initio multiconfiguration Dirac-Fock calculations. With the latter method also ab initio hyperfine constants for the levels investigated were evaluated. A comparison of calculated fine structure energies, Landég _J -factors and hyperfine constants with the experimental data allowed a test of the reliability of the fine structure and multiconfiguration Dirac-Fock wavefunctions. Effective nuclear electric quadrupole moments for¹⁶⁷Er have been determined from the experimental hyperfine constants using both calculated relativistic electronic radial integrals and hyperfine parameters for the 4f and 5d electrons in the configuration 4f ¹¹5d6s ² in Er I. From a comparison with the nuclear quadrupole moment measured in the mesic atom Sternheimer shielding factors are calculated. Configuration-interaction contributions to the radial integrals 〈r ^?3〉 _nl ⁰¹ of the 4f and 5d electrons have been determined.     

Polymerization of w/o microemulsions for the preparation of transparent SiO2/PMMA nanocomposites

Reverse w/o microemulsions composed of methyl methacrylate (MMA) forming the oil phase, nonionic surfactants, and water are used for the synthesis of transparent SiO2/PMMA nanocomposites. An inorganic precursor, tetraethoxysilane (Si(OEt)(4), TEOS), is hydrolyzed in the reverse micelles containing aqueous ammonia. During the hydrolysis of TEOS, polymerization of the continuous MMA phase is initiated using AIBN (azobisisobutyronitrile), and after thermal polymerization at 333 K for 12 h, solid blocks of PMMA are obtained in which nanometer-sized silica particles are trapped in the solid polymer matrix. According to small-angle X-ray and dynamic light scattering experiments, the water droplets in MMA microemulsions are 12 nm (R(W) = 13) in diameter, whereas after polymerization of the microemulsion, the SiO2 particles in the transparent SiO2/PMMA composites are 26 nm in diameter. Transmission electron micrographs demonstrate a low degree of agglomeration in the composites. In comparison with materials generated from micelle-free solutions, the particle size distribution is narrow. The reverse micelle-mediated approach produces composites of high transparency comparable with that of pure PMMA.     

Determination of an aldosterone antagonist in urine by high-performance liquid chromatography using automated column switching

An automated high-performance liquid chromatographic assay for the determination of an aldosterone antagonist (I) is described using column switching for direct injection of urine samples. After dilution with buffered internal standard solution, the sample was injected onto a clean-up column (17 X 4.6 mm I.D.), dry-packed with C18 reversed-phase material (particle size 30 micron). Polar urine components were removed by flushing the clean-up column with water. Retained substances, including I and the internal standard, were desorbed by backflush elution onto a 5-micron ODS-silica analytical column (125 X 4 mm I.D.), separated with water-methanol-tetrahydrofuran, and detected at 295 nm. After backflushing the analytical column and re-equilibrating the clean-up column, the system was ready for the next injection. The limit of quantification was ca. 100 ng/ml, using a 100-microliter specimen of diluted urine. The mean inter-assay precision of the method up to 25.6 micrograms/ml was 2%. Practicability and accuracy of the new method were demonstrated by the application to excretion studies performed with human volunteers.     

Wachstum dünner Fluorkohlenstoffschichten auf der Anode einer Glühkathodenentladung

The polymerization of tetrafluorethylene on the anode of a hot glow discharge has been investigated. Rates of polymer deposition have been measured as a function of monomer pressure, discharge current density, and electrode surface temperature. A mechanism of polymer formation is suggested. The results are different from those obtained by polymerization of the same monomer in a glow discharge. It is concluded that negative ions have a great influence on mechanism of polymer formation. Additionally, monomer molecules adsorbed at the electrode are polymerized by electron bombardment.     

Kristallstrukturen von Säurehydraten und Oxoniumsalzen. XX. Die Oxoniumtetrafluoroborate H3OBF4, [H5O2]BF4 und [H(CH3OH)2]BF4

Crystal Structures of Acid Hydrates and Oxonium Salts. XX. Oxonium Tetrafluoroborates H₃OBF₄, [H₅O₂]BF₄, and [H(CH₃OH)₂]BF₄ The crystal structures of three oxonium tetrafluoroborates were determined. H₃OBF₄, oxonium tetrafluoroborate proper, is triclinic with space group P1 , Z = 2 and the unit cell dimensions a = 4.758, b = 6.047, c = 6.352 Å and α = 80.40, β = 79.48, γ = 88.25° at ?26°C. Cations H₃O⁺ and anions BF₄^? are linked by hydrogen bonds O? H…?F into ribbons of condensed rings. In [H₅O₂]BF₄ (diaquohydrogen tetrafluoroborate, monoclinic, P2₁/c, Z = 4, a = 6.584, b = 9.725, c = 7.084 Å, β = 95.15° at ?100°C) the hydrogen bond in the cation H₅O₂⁺ is 2.412 Å short, asymmetric and approximately centered and the linking of cations and anions three-dimensional. In [H(CH₃OH)₂]BF₄ (Bis(methanol)hydrogen tetrafluoroborate, monoclinic, P2₁/c, Z = 4, a = 5.197, b = 14.458, c = 9.318 Å, β = 94.61° at ?50°C) the cation [H(CH₃OH)₂]⁺ is characterized for the first time in a crystal structure with an again very short (2.394 Å), asymmetric and effectively centered hydrogen bond. By further hydrogen bonds cations and anions form only dimers of the formula unit of centrosymmetric cyclic structure.     

Capillary array scanner for time-resolved detection and identification of fluorescently labelled DNA fragments

The first capillary array scanner for time-resolved fluorescence detection in parallel capillary electrophoresis based on semiconductor technology is described. The system consists essentially of a confocal fluorescence microscope and a x,y-microscope scanning stage. Fluorescence of the labelled probe molecules was excited using a short-pulse diode laser emitting at 640 nm with a repetition rate of 50 MHz. Using a single filter system the fluorescence decays of different labels were detected by an avalanche photodiode in combination with a PC plug-in card for time-correlated single-photon counting (TCSPC). The time-resolved fluorescence signals were analyzed and identified by a maximum likelihood estimator (MLE). The x,y-microscope scanning stage allows for discontinuous, bidirectional scanning of up to 16 capillaries in an array, resulting in longer fluorescence collection times per capillary compared to scanners working in a continuous mode. Synchronization of the alignment and measurement process were developed to allow for data acquisition without overhead. Detection limits in the subzeptomol range for different dye molecules separated in parallel capillaries have been achieved. In addition, we report on parallel time-resolved detection and separation of more than 400 bases of single base extension DNA fragments in capillary array electrophoresis. Using only semiconductor technology the presented technique represents a low-cost alternative for high throughput DNA sequencing in parallel capillaries.     

Study of the Properties of Electrodeposited Polypyrrole Films

Experimental and theoretical methods have been used for characterization of the properties of polypyrrole films. The AFM studies show that the morphology of polypyrrole (PPy) films on polycrystalline gold electrodes at the first stages of synthesis depends on the structure of the metal surface. It was established that mobility of anions depends remarkably on the rate of electrodeposition of the polymer film. If PPy film was deposited at relatively low current density, mobility of ClO^- ₄ anion was not high enough to guarantee electroneutrality during redox cycling and cations take part in this process especially when Li⁺ cations were replaced by more mobile ⁺ cations. Semiempirical (AM1 and PM3) quantum-chemical methods were used for theoretical studies. It was established that different size and charge of the anions together with the variation in doping levels give rise to a different optimal conformation of oligopyrrole cations which, in turn, define the resulting polymer to be either all-anti (common linear chains) or all-syn (formation of helical structures) or a combination of the two.     

Novel iron(III) complexes of tripodal and linear tetradentate bis(phenolate) ligands: close relevance to intradiol-cleaving catechol dioxygenases

Four new iron(III) complexes of the bis(phenolate) ligands N,N-dimethyl-N',N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L1)], N,N-dimethyl-N',N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L2)], N,N'-dimethyl-N,N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L3)], and N,N'-dimethyl-N,N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L4)] have been isolated and studied as structural and functional models for the intradiol-cleaving catechol 1,2-dioxygenases (CTD). The complexes [Fe(L1)Cl] (1), [Fe(L2)(H2O)Cl] (2), [Fe(L3)Cl] (3), and [Fe(L4)(H2O)Cl] (4) have been characterized using absorption spectral and electrochemical techniques. The single-crystal X-ray structures of the ligand H2(L1) and the complexes 1 and 2 have been successfully determined. The tripodal ligand H2(L1) containing a N2O2 donor set represents the metal-binding region of the iron proteins. Complex 1 contains an FeN2O2Cl chromophore with a novel trigonal bipyramidal coordination geometry. While two phenolate oxygens and an amine nitrogen constitute the trigonal plane, the other amine nitrogen and chloride ion are located in the axial positions. In contrast, 2 exhibits a rhombically distorted octahedral coordination geometry for the FeN2O3Cl chromophore. Two phenolate oxygen atoms, an amine nitrogen atom, and a water molecule are located on the corners of a square plane with the axial positions being occupied by the other nitrogen atom and chloride ion. The interaction of the complexes with a few monodentate bases and phenolates and differently substituted catechols have been investigated using absorption spectral and electrochemical methods. The effect of substituents on the phenolate rings on the electronic spectral features and FeIII/FeII redox potentials of the complexes are discussed. The interaction of the complexes with catecholate anions reveals changes in the phenolate to iron(III) charge-transfer band and also the appearance of a low-energy catecholate to iron(III) charge-transfer band similar to catechol dioxygenase-substrate complexes. The redox behavior of the 1:1 adducts of the complexes with 3,5-di-tert-butylcatechol (H2DBC) has been also studied. The reactivities of the present complexes with H2DBC have been studied and illustrated. Interestingly, only 2 and 4 catalyze the intradiol-cleavage of H2DBC, the rate of oxygenation being much faster for 4. Also 2, but not 4, yields an extradiol cleavage product. The reactivity of the complexes could be illustrated not on the basis of the Lewis acidity of the complexes alone but by assuming that the product release is the rate-determining phase of the catalytic reaction.     

Alkaloids ofGlaucium fimbrilligerum. II

The alkaloids of the epigeal part and roots of the plantGlaucium fimbrilligerum have been studied. A total of 18 alkaloids has been isolated, of which epiglaufidine proved to be new, and its structure has been established. Columbamine has been isolated from the genusGlaucium for the first time, and magnoflorine and stilopine -hydroxymethylate from this species of plant for the first time.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Purkinje University, Brno, Czechoslovakia. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 493–496, July–August, 1983.     

SCF-Xα-SW model calculations for metal clusters of nickel,copper, and silver and for the oxygen chemisorption on these metals

The oxygen chemisorption on Ni, Cu and Ag is studied by comparing PE spectra of these systems and SCF-Xα scattered-wave cluster models. Consideration of octahedral clusters M₆ (M = Ni, Cu, Ag) shows that they are large enough to reproduce trends in energy differences, such as the width of the d-bands and the distance from the top of the d-bands to the Fermi level, as found in experiment and in bulk energy band calculations. Substrate model clusters for the interaction of oxygen with different metal surfaces are derived from an octahedron by removing one ((100) face) or two adjacent metal atoms ((110) face). Comparing the UPS difference spectrum for O/Ag (110) with several Ag₄O cluster models makes it possible to interpret the peaks above the Ag d-band as O-Ag anti-bonding levels. These peaks are caused by O 2p-Ag 4d and O 2p-Ag 5s interaction. The corresponding bonding levels fall in the Ag d-bands and cannot therefore be identified with confidence in the spectra. The decreasing intensity of the oxygen derived peak below the metal d-band in the UPS spectra when going from Ni to Cu to Ag, and the simultaneously increasing O peaks above the d-band correlate with the changes of the localization of the corresponding bonding and anti-bonding levels in the oxygen sphere and the decreasing strength of the chemisorption bond.