Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.     

Extraktion von alkali- und erdalkalimetallionen mit (sym-dibenzo-14-krone-4-oxy)- und (sym-dibenzo-16-krone-5-oxy)-carbonsäuren

(Extraction of alkali on alkaline earth metal ions with (sym-dibenzo-14-crown-4-oxy)- and (sym-dibenzo-16-crown-5-oxy)-carboxylic acids.)The extraction of lithium, sodium, potassium, calcium and some other metal ions with dibenzo-4-crown-4-oxy- and dibenzo-16-crown-5-oxycarboxylic acids containing the groups -CH₂COOH, -(CH₂)₂COOH, -(CH₂)₃COOH, -CH(C₂H₅)COOH and -CH(C₄H₉)COOH was studied. The extraction increases as a function of the lipophilic character of the carboxylic acid group. Calcium, barium and strontium ions are better extracted than Li⁺, Na⁺ and K⁺; there are only small differences among the alkaline earth metal ions. Evaluated from the extraction data, the composition of the extracted species was 1:1 (metal/ligand) for Li⁺, and 1:2 for CaCa²⁺; Na⁺ and K⁺ favour the formation of 1:2 complexes with dibenzo-14-crown-4-derivatives bbut 1:1 complexes with dibenzo-16-crown-5-oxy-carboxylic acids. The dependence of the distribution ratio on pH does not provide unequivocal evidence for the composition of the extracted compounds.     

1H-CRAMPS Solid-State NMR and X-Ray Crystal Studies of Inclusion Complexes Formed from 3,3′-bis(9-Hydroxy-9-fluorenyl)-2,2′-binaphthyl Hosts with Acetone

The crystal structures of inclusion compounds of 3,3-bis(9-hydroxy-9-fluorenyl)-2,2-binaphthyl host (1) and its chloro (2) or bromo (3) derivatives substituted in 2,7-positions of the fluorene units with acetone guests (1A–3A) were determined by X-ray studies as well as by ¹H-CRAMPS solid-state NMR. Using this NMR technique allows identification of differently bound guest molecules due to their different chemical shifts caused by the influence of the ring current effects of the host aryl units.     

Critical parameters and optimization of a magnesium-selective liquid membrane electrode for application to human blood serum

Summary The selectivity of a new magnesium ionophore (ETH 7025) induced in membranes of different compositions is experimentally studied in view of the ion activities in human serum. The required selectivity coefficient against calcium for the application of an ion-selective magnesium electrode to human serum is calculated for the worst case. Other critical parameters for the application of a liquid PVC-based ion-selective membrane to undiluted human serum discussed are: the sensor lifetime which is related to the lipophilicity of the carrier as well as the ruggedness of the membrane against interactions with components of the relatively lipophilic sample.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

The analysis of C4–C11 hydrocarbons in naphtha and reformate with a new apolar fused silica column

This paper deals with the separation of alkanes, naphthenes, and aromatic compounds in naphtha and reformate, on a newly developed apolar high resolution GC column. The selectivity of this apolar phase has been compared with those of squalane, DB-1, and SE-30. A total of 95 hydrocarbons were reliably identified, mostly by GC-MS. Repeated measurements of Kováts retention indices are presented as evidence for the reproducible manufacture of fused silica columns coated with this phase.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

Summary. The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.     

Time-resolved measurements of intramolecular energy transfer in single donor/acceptor dyads

We have investigated electronic excitation energy transfer in a specifically designed bichromophoric donor/acceptor dyad in which the donor (perylenediimide) and acceptor (terrylenediimide) are linked by a rigid heptaphenyl-spacer. Because of the choice of the bridge, which defines the distance and orientation of the two chromophores, donor as well as acceptor emission is observed. The significantly smaller photostability of the donor allows for time-resolved measurements of the acceptor emission at the single-molecule level with and without energy transfer from the donor. By analyzing the differences of the rise/decay profiles for both pathways, we could determine time constants of energy transfer with high accuracy for single dyads. The results show that the experimental approach presented here works even for situations in which the energy transfer times are smaller than the temporal resolution of the detection system.     

PHOTOSENSITIZED REACTIONS OF POLY(U) WITH TRIS(2,2'' BIPYRIDYL)RUTHENIUM(II) AND PEROXYDISULFATE

The reactions of polyuridylic acid [poly(U)] with Ru(bpy)3(3+) [Ru(III)] and SO4.-, following UV and visible light irradiation of Ru(bpy)3(2+) [Ru(II)] in the presence of S2O8(2-), were studied in an argon-saturated aqueous solution using time-resolved absorption and conductivity methods. The kinetics of the Ru(III) conversion to Ru(II) in the presence of poly(U) was monitored spectroscopically either in the absence of SO4.- [rapid mixing with Ru(III)] or in its presence (after laser flash excitation, lambda exc = 353 nm). The conversion of Ru(III) to Ru(II) is complete at a [nucleotide]/[sensitizer] (N/S) ratio greater than or equal to 10 (rate constant k = 12 s-1) for rapid mixing and at N/S greater than or equal to 6 (k = 15 s-1 at N/S = 10) after laser pulsing. Conductivity measurements following the laser pulse revealed a fast conductivity increase (risetime less than 10 micros), due to the formation of charged species and protons. A slower increase in the 0.1-0.5 s range was observed for poly(U) but it is considerably smaller for poly(dU) and absent in uracil containing monounits. The slow increase is unaffected by pH changes in the 3.5-7 range, markedly reduced in the 7-9 range and is replaced by a slight decrease in conductivity in buffered solutions. An explanation is that poly(U)-bound excited Ru(II) reacts with S2O8(2-) forming Ru(III) and SO4.- as oxidizing species both of which react with poly(U) bases. The resulting base radicals react with Ru(III) or the ligands in the ruthenium complex, producing protons which give rise to the slow conductivity increase (k = 15 s-1 at N/S = 10). The formation of single-strand breaks and the ensuing release of condensed counterions does not appear to contribute significantly to the slow conductivity signal. At N/S less than 10 the observed rate and extent of Ru(III)--Ru(II) conversion and of the slow proton production vary markedly with the N/S ratio.     

Komplexe von FeI2 und FeI3 mit Tetramethylharnstoff

Complexes of FeI₂ and FeI₃ with Tetramethylurea [FeI₂(OC(NMe₂)₂)₂] ( 1 , [Fe₂I₄(OC(NMe₂)₂)₂] ( 2 ), and [FeI₃(OC(NMe₂)₂] ( 3 ) were prepared by the reaction of FeI₂ and FeI₂/iodine, respectively, with tetramethylurea. The structures of 1 and 3 were determined from single crystal X-ray diffraction data. 1 crystallizes in the triclinic space group P1 , with a = 809.9(1), b = 923.2(1), c = 1 374.6(1) pm, α = 106.80(1), β = 90.47(1), γ = 101.55(1)°; Z = 2; R = 0.045., 3 : monoclinic, P2₁/c, a = 1 311.4(1), b = 783.3(1), c = 1 409.1(1) pm, β = 97.36(1)°; Z = 4; R = 0.047. 1 and 3 are isolated neutral complexes with distorted tetrahedral coordination of iron. 3 is the first FeI₃-complex with an O-donor ligand. The IR-spectra exhibit strong shifts of n?C = O and n?_asC—N of tetramethylurea especially on coordinating to FeI₃.