Double‐crosslinked reversible redox‐responsive hydrogels based on disulfide–thiol interchange

We present novel redox‐responsive hydrogels based on poly(N‐isopropylacrylamide) or poly(acrylamide), consisting of a reversible disulfide crosslinking agent N,N′‐bis(acryloyl)cystamine and a permanent crosslinking agent N,N′‐methylenebisacrylamide for microfluidic applications. The mechanism of swelling/deswelling behavior starts with the cleavage and reformation of disulfide bonds, leading to a change of crosslinking density and crosslinking points. Raman and ultraviolet‐visible spectroscopy confirm that conversion efficiency of thiol–disulfide interchange up to 99%. Rheological analysis reveals that the E modulus of hydrogel is dependent on the crosslinking density and can be repeatedly manipulated between high‐ and low‐stiffness states over at least 5 cycles without significant decrease. Kinetic studies showed that the mechanical strength of the gels changes as the redox reaction proceeds. This process is much faster than the autonomous diffusion in the hydrogel. Moreover, cooperative diffusion coefficient (D_coop) indicates that the swelling process of the hydrogel is affected by the reduction reaction. Finally, this reversibly switchable redox behavior of bulky hydrogel could be proven in microstructured hydrogel dots through short‐term photopatterning process. These hydrogel dots on glass substrates also showed the desired short response time on cyclic swelling and shrinking processes known from downsized hydrogel shapes. Such stimuli‐responsive hydrogels with redox‐sensitive crosslinkers open a new pathway in exchanging analytes for sensing and separating in microfluidics applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2590–2601     

(NH4)4Na2[V10O28]·10H2O

Tetra­ammonium disodium decavanadate decahydrate crystallizes in the triclinic system in space group P. The structure contains typical centrosymmetric OV₆ double octahedra and centrosymmetric pairs of edge‐shared NaO₆ double octahedra forming a layered structure. In contrast to other monovalent cationic decavanadates, the NaO₆ double octahedra are integrated in the layer.     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Structural and variable-temperature NMR studies of 9-diisopropylphosphanylanthracenes and 9,10-bis(diisopropylphosphanyl)anthracenes and their oxidation products

The diisopropylphosphanyl-substituted anthracenes i-Pr2P(C14H9) (1a), i-Pr2P(C14H8)Br (2a), and (i-Pr2P)2(C14H8) (3a) and some of their oxidation products were prepared from 9-bromoanthracene and 9,10-dibromoanthracene, respectively. Low-temperature (1)H NMR spectra of the 9-monophosphanyl-substituted anthracenes 1a and 2a are in accordance with a staggered conformer, while above room temperature dynamic processes occur. The low-temperature NMR spectrum of the 9,10-diphosphanylanthracene 3a indicates the presence of two different rotational isomers. The rotational barrier for 1a was determined from variable-temperature (1)H NMR spectra to be 56 kJ mol(-1) (DeltaG(298K)). The crystal structure determinations show the solid-state conformers to be consistent with the prevailing conformer at low temperature.     

Stick-slip of the three-phase line in measurements of dynamic contact angles

Contact angles of a series of n-alkanes (i.e., n-heptane to n-hexadecane) are studied on two functionalized maleimide copolymers (i.e., poly(ethene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ETMF) and poly(octadecene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ODMF)). On the homogeneous ETMF films, all liquids show a smooth motion of the three-phase line. In contrast, on ODMF surfaces that are found to consist of mainly fluorocarbons and small patches of hydrocarbons, short-chain n-alkanes show a stick-slip pattern. By increasing the chain length of the probe liquids, stick-slip is reduced significantly. The phenomenon is discussed in the framework of the Cassie equation. It is found that the upper limit of contact angles in the stick-slip pattern is given by the advancing angle that would be obtained on the pure fluorocarbon surface, whereas the lower limit of the stick-slip pattern is given by the Cassie angle.     

On the Validity of Stokes–Einstein and Stokes–Einstein–Debye Relations in Ionic Liquids and Ionic‐Liquid Mixtures

Stokes–Einstein (SE) and Stokes–Einstein–Debye (SED) relations in the neat ionic liquid (IL) [C₂mim][NTf₂] and IL/chloroform mixtures are studied by means of molecular dynamics (MD) simulations. For this purpose, we simulate the translational diffusion coefficients of the cations and anions, the rotational correlation times of the C(2)? H bond in the cation C₂mim⁺, and the viscosities of the whole system. We find that the SE and SED relations are not valid for the pure ionic liquid, nor for IL/chloroform mixtures down to the miscibility gap (at 50 wt % IL). The deviations from both relations could be related to dynamical heterogeneities described by the non‐Gaussian parameter α(t). If α(t) is close to zero, at a concentration of 1 wt % IL in chloroform, both relations become valid. Then, the effective radii and volumes calculated from the SE and SED equations can be related to the structures found in the MD simulations, such as aggregates of ion pairs. Overall, similarities are observed between the dynamical properties of supercooled water and those of ionic liquids.     

A novel 3D mammalian cell perfusion-culture system in microfluidic channels

Mammalian cells cultured on 2D surfaces in microfluidic channels are increasingly used in drug development and biological research applications. These systems would have more biological or clinical relevance if the cells exhibit 3D phenotypes similar to the cells in vivo. We have developed a microfluidic channel based system that allows cells to be perfusion-cultured in 3D by supporting them with adequate 3D cell-cell and cell-matrix interactions. The maximal cell-cell interaction was achieved by perfusion-seeding cells through an array of micropillars; and 3D cell-matrix interactions were achieved by a polyelectrolyte complex coacervation process to form a thin layer of matrix conforming to the 3D cell shapes. Carcinoma cell lines (HepG2, MCF7), primary differentiated (hepatocytes) and primary progenitor cells (bone marrow mesenchymal stem cells) were perfusion-cultured for 72 hours to 1 week in the microfluidic channel, which preserved their 3D cyto-architecture and cell-specific functions or differentiation competence. This transparent 3D microfluidic channel-based cell culture system also allows direct optical monitoring of cellular events for a wide range of applications.     

A new route to achiral and chiral 1,2-bis(phosphino)ethanes, 1-arsino-2-phosphinoethanes, and 1,3-bis(phosphino)propanes and the molecular structure and catalytic activity of some rhodium(I) complexes derived thereof

A series of unsymmetrical 1,2-bis(phosphino)ethanes R(2)PCH(2)CH(2)PR'(2) and 1-arsino-2-phosphinoethanes R(2)AsCH(2)CH(2)PR'(2) mainly with bulky substituents R and R' were prepared from the cyclic sulfate by stepwise cleavage of the carbon-oxygen bonds by LiPR(2) and LiPR'(2) or LiAsR(2) and LiPR'(2), respectively. Analogously, racemic mixtures of R(2)PCH(2)CH(Me)PPh(2)(R =iPr, Cy ) as well as the enantiomers (R)-, (R)- and (R)-tBu(2)PCH(2)CH(Me)PPh(2)(R)- were obtained from the corresponding unsymmetrical cyclic sulfates and (S)-. On a similar route, the racemates of the 1,3-bis(phosphino)propanes R(2)PCH(2)CH(2)CH(Me)PPh(2)(R =iPr, tBu ), optically pure (R)- and (S,S)-iPr(2)PCH(Me)CH(2)CH(Me)PPh(2)(S,S)- were prepared. The reaction of [[RhCl([small eta](4)-C(8)H(12))](2)] with chelating ligands L-L, where L-L is R(2)PCH(2)P(men)(2)(R =iPr, Ph; men =(1S,2R,5S)-menthyl), Cy(2)AsCH(2)P(men)(2), or (R)-, (R)-, (R)-, (R)- and (S,S)-, in the presence of AgPF(6), gave the complexes [Rh(eta(4)-C(8)H(12))(L-L)]PF(6) which were used as pre-catalysts in the hydrogenation of the methyl ester of alpha-acetamidocinnamic acid (ACM). Depending on L-L, the solvent, the temperature and the pressure of H(2), optical yields of up to 69% ee were achieved. For two of the rhodium complexes, and, the molecular structures were determined by X-ray crystallography.