Comparison of electron spin resonance probe and dielectric relaxation in physically and chemically crosslinked polymers

Dielectric relaxation spectroscopy in the frequency range from 10⁻² Hz to 10⁶ Hz and electron spin resonance (ESR) experiments are employed to study the dynamics in chemically and physically crosslinked networks. As examples for physically crosslinked networks ortho- and para-cresol novolacs were investigated. Dielectrically these materials show low-temperature β- and high-temperature α-relaxation. Both relaxation regions differ for both types of novolacs. This is also reflected by the ESR measurements and is discussed in terms of different hydrogen bonds found to be stronger in para-cresol novolac. For the chemically crosslinked poly(triallyl isocyanurate) only a β-peak is found by the dielectric measurements. Also in the ESR experiment the slow motion regime is characterized up to high temperatures. This means that the segmental motion is strongly suppressed by chemical crosslinking. Nevertheless the obtained change in the formal T_50G value can be used to characterize the glass transition in highly crosslinked systems by the ESR method.     

Influence of the mesophase structure on the β-relaxation in liquid crystalline poly(meth)acrylates

The dependence of the rotation of the mesogenic unit around its long axis (β-relaxation) on the actual mesophase in liqid crystalline polymethacrylates and polyacrylates was studied by dielectric spectroscopy in the frequency range from 10⁻² Hz to 10⁶ Hz and in a temperature range from 170 K to 430 K. As mesogenic units derivatives of (p-alkoxy-phenyl)-benzoate were used where different mesophases were achieved by small variation of the mesogenic structure, the spacer length and the tail group of the mesogenic unit. For all samples the temperature dependence of the relaxation rate of the β-relaxation can be described by an Arrhenius equation where both the pre-exponential factor and the activation energy increase significantly with the order of the mesophase. To characterize the structure X-ray measurements were also carried out. The mean lateral mesogenic distance was correlated directly with relaxational quantities.     

Acceleration of the cationic polymerization of an epoxy with hexanediol

Thin films of 3,4-epoxycyclohexylmethyl 3',4'-epoxycyclohexane carboxylate were UV irradiated (1.1 J cm^-2) under isothermal conditions ranging from 0 to 50°C. Under these conditions the polymerization advanced quickly but only to a conversion level of less than 10% before the reaction rate slowed by more than an order of magnitude. This drop off in rate was not caused by the glass transition temperature, T _g, reaching or exceeding the reaction temperature, T _rxn, since the epoxide's T _g remained at least 40°C below T _rxn. Raising the sample temperature above 60°C caused a sharp increase in the conversion level. At 100°C conversion exceeds 80% and the ultimate T _g approaches 190°C. The addition of 10 mass% 1,6-hexanediol, HD, to the epoxy caused the conversion at room temperature to quintuple over the level obtained without the alcohol present. The heat liberated from this alcohol epoxy blend during cure on a UV conveyor belt system caused the sample's temperature to increase by about 100°C above ambient whereas the epoxy alone under these conditions only experienced a modest temperature rise of about 26°C. If the amount of HD in the blend is increased above 10% the heat of reaction at 23°C decreases due to HD being trapped in a nonreactive crystalline phase. Boosting reaction temperatures above 50°C melts the HD crystals and yields significantly improved conversion ratios. As the level of alcohol blended with the epoxy is raised its ultimate T _g is lowered and when the concentration of alcohol in the blend nears 30 mass%T _g drops below room temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

A novel 3D mammalian cell perfusion-culture system in microfluidic channels

Mammalian cells cultured on 2D surfaces in microfluidic channels are increasingly used in drug development and biological research applications. These systems would have more biological or clinical relevance if the cells exhibit 3D phenotypes similar to the cells in vivo. We have developed a microfluidic channel based system that allows cells to be perfusion-cultured in 3D by supporting them with adequate 3D cell-cell and cell-matrix interactions. The maximal cell-cell interaction was achieved by perfusion-seeding cells through an array of micropillars; and 3D cell-matrix interactions were achieved by a polyelectrolyte complex coacervation process to form a thin layer of matrix conforming to the 3D cell shapes. Carcinoma cell lines (HepG2, MCF7), primary differentiated (hepatocytes) and primary progenitor cells (bone marrow mesenchymal stem cells) were perfusion-cultured for 72 hours to 1 week in the microfluidic channel, which preserved their 3D cyto-architecture and cell-specific functions or differentiation competence. This transparent 3D microfluidic channel-based cell culture system also allows direct optical monitoring of cellular events for a wide range of applications.     

Novel aflatoxin derivatives and protein conjugates

Aflatoxins, a group of structurally related mycotoxins, are well known for their toxic and carcinogenic effects in humans and animals. Aflatoxin derivatives and protein conjugates are needed for diverse analytical applications. This work describes a reliable and fast synthesis of novel aflatoxin derivatives, purification by preparative HPLC and characterisation by ESI-MS and one- and two-dimensional NMR. Novel aflatoxin bovine serum albumin conjugates were prepared and characterised by UV absorption and MALDI-MS. These aflatoxin protein conjugates are potentially interesting as immunogens for the generation of aflatoxin selective antibodies with novel specificities.