Synthesis and Coordination Behavior of a New Hybrid Bidentate Ligand with Phosphine and Silylene Donors

This work describes the synthesis and coordination behavior of a new mixed-donor ligand PhC(NtBu)₂SiC₆H₄PPh₂ ( 1 ) containing both silylene and phosphine donor sites. Ligand 1 was synthesized from a reaction of ortho-lithiated diphenylphosphinobenzene (LiC₆H₄PPh₂) with chlorosilylene (PhC(NtBu)₂SiCl). Treatment of 1 with Se and GeCl₂ resulted in Si^IV compounds 2 and 3 by selective oxidation of the silylene donor. This strong σ-donor ligand induces dissociation of CuCl and PhBCl₂ leading to formation of ionic complexes 4 and 5 respectively. The reaction of 1 with ZnCl₂ and AlCl₃ resulted in the formation of chelate complexes 5 and 7 , respectively, while treatment with EtAlCl₂ and GaCl₃ forms monodentate complexes 8 and 9 . X-ray analysis of 4 showed that the copper is in the spiro center of the two five-membered rings. Moreover, the copper(I)chloride has not been oxidized but dissociates to Cu⁺ and [CuCl₂]⁻. All the compounds are well characterized by mass spectrometry, elemental analysis, NMR spectroscopy, and single-crystal X-ray diffraction studies.     

Neutral Hexacoordinate Phosphorus: Substituted Carbodiimide Phosphoranes and Other Chelated Substituted 2-Pyridine Derivatives

Abstract

A series of neutral hexacoordinate λ⁶ phosphorus compounds of the general formula X_4-n(CF₃)_nPN(R)C(C1)N(R) (n = 0, 1, 2, 3; R = cyclohexyl, isopropyl) has been prepared. The parent compounds are obtained by “insertion” of carbodiimide into the P-C1 bond of λ⁵-chlorophosphorane. Substituted pyridines also react readily with λ⁵ chloro and fluoro phosphoranes to form 2-methylamino, thio and oxopyridine chelates of the form X₄P(Epy) (E = 0, NMe and S; X = F, Cl) in which the phosphorus achieves six coordination through acceptance of the pyridine nitrogen. Selected reactions and the fluxional behavior of the λ⁶ systems are discussed.     

Polypyrrole Grafts Synthesized via Electrochemical Polymerization

Abstract

Electrically conducting polypyrrole grafts with poly[(methyl meth-acrylate)-co-(2-(N-pyrrolyl) ethyl methacrylate)] (PMMA-co-PEMA) were synthesized by constant potential electrolysis. Cyclic Voltammetry, DSC, TGA, SEM and elemental analysis were used in order to characterize the free standing films. Conductivities of the polymers were measured by a four-probe technique.     

Electron Transfer between Hydrogen‐Bonded Pyridylphenols and a Photoexcited Rhenium(I) Complex

Two pyridylphenols with intramolecular hydrogen bonds between the phenol and pyridine units have been synthesized, characterized crystallographically, and investigated by cyclic voltammetry and UV/Vis spectroscopy. Reductive quenching of the triplet metal‐to‐ligand charge‐transfer excited state of the [Re(CO)₃(phen)(py)]⁺ complex (phen=1,10‐phenanthroline, py=pyridine) by the two pyridylphenols and two reference phenol molecules is investigated by steady‐state and time‐resolved luminescence spectroscopy, as well as by transient absorption spectroscopy. Stern–Volmer analysis of the luminescence quenching data provides rate constants for the bimolecular excited‐state quenching reactions. H/D kinetic isotope effects for the pyridylphenols are on the order of 2.0, and the bimolecular quenching reactions are up to 100 times faster with the pyridylphenols than with the reference phenols. This observation is attributed to the markedly less positive oxidation potentials of the pyridylphenols with respect to the reference phenols (≈0.5 V), which in turn is caused by proton coupling of the phenol oxidation process. Transient absorption spectroscopy provides unambiguous evidence for the photogeneration of phenoxyl radicals, that is, the overall photoreaction is clearly a proton‐coupled electron‐transfer process.     

Water adsorption and desorption pretreatment of surfaces increases the maximum amount of adsorbed water molecules by a multiple

The amount of adsorbed water on surfaces in an atmosphere with 100 % relative humidity can be increased by a multiple, if the surfaces are pretreated by cycles of adsorption and desorption of water. This was observed on surfaces of diamond, titanium dioxide and silicon dioxide at temperatures around 22 °C. With a sufficient number of such cycles a faster and stronger adsorption of water molecules was obtained, if compared with untreated surfaces. This also means an increased energy transfer from the atmosphere to the surface. Due to the pretreatment the amount of adsorbed water was more than three times increased. The observed effect is explained by small amounts of specially arranged water molecules, which remain on the surface after the desorption process and which support the adsorption of water. The observed effect can be used to moisten surfaces of small particles very efficiently from the gas phase.     

From Nongelating to Gelating: Synthesis and Structural Self‐Assembling Property Relationships of a Homologous Series of Oligo(amide–triazole)s

A homologous series of oligo(amide–triazole)s (OAT) [ OAT‐CO₂H‐2 n and OAT‐COPrg‐(2 n +1) ] with an increasing number of primary amide (CONH) and triazole hydrogen‐bonding functionalities was prepared by an iterative synthetic procedure. It was found that their self‐assembly and thermoreversible gelation strength had a strong correlation to the number of hydrogen‐bonding moieties in the oligomers. There also existed a threshold value of the number of CONH units, above which all the oligomers became organogelators. Hence, oligomers with ≤4 CONH units are devoid of intermolecular hydrogen bonding and also non‐organogelating, whereas those that contain >4 CONH units show intermolecular association and organogelating properties. For the organogelators, the T_gel value increases monotonically with increasing number of CONH units. On the basis of FTIR measurements, both the CONH and triazole C? H groups were involved in the hydrogen‐bonding process. A mixed xerogel that consisted of a 1:1 weight ratio of two oligomers of different lengths ( OAT‐CO₂H‐6 and OAT‐CO₂H‐12 ) was found to show microphase segregation according to differential scanning calorimetry, thus indicating that oligomers that bear a different number of hydrogen‐bonding units exhibited self‐sorting to maximize the extent of intermolecular hydrogen bonding in the xerogel state.     

Reaction of N‐Heterocyclic Silylenes with Thioketone: Formation of Silicon–Sulfur Three (Si‐C‐S)‐ and Five (Si‐C‐C‐C‐S)‐Membered Ring Systems

Three‐ and five‐membered rings that bear the (Si‐C‐S ) and (Si‐C‐C‐C‐S ) unit have been synthesized by the reactions of L SiCl ( 1 ; L =PhC(NtBu)₂) and L′ Si ( 2 ; L′ =CH{(C?CH₂)(CMe)(2,6‐iPr₂C₆H₃N)₂}) with the thioketone 4,4′‐bis(dimethylamino)thiobenzophenone. Treatment of 4,4′‐bis(dimethylamino)thiobenzophenone with L SiCl at room temperature furnished the [1+2]‐cycloaddition product silathiacyclopropane 3 . However, reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si at low temperature afforded a [1+4]‐cycloaddition to yield the five‐membered ring product 4 . Compounds 3 and 4 were characterized by NMR spectroscopy, EIMS, and elemental analysis. The molecular structures of 3 and 4 were unambiguously established by single‐crystal X‐ray structural analysis. The room‐temperature reaction of 4,4′‐bis(dimethylamino)thiobenzophenone with L′ Si resulted in products 4 and 5 , in which 4 is the dearomatized product and 5 is formed under the 1,3‐migration of a hydrogen atom from the aromatic phenyl ring to the carbon atom of the C? S unit. Furthermore, the optimized structures of probable products were investigated by using DFT calculations.     

Estimation of rating classes and default probabilities in credit risk models with dependencies

Let Y = m(X) + ε be a regression model with a dichotomous output Y and a one‐step regression function m . In the literature, estimators for the three parameters of m , that is, the breakpoint θ and the levels a and b , are proposed for independent and identically distributed (i.i.d.) observations. We show that these standard estimators also work in a non‐i.i.d. framework, that is, that they are strongly consistent under mild conditions. For that purpose, we use a linear one‐factor model for the input X and a Bernoulli mixture model for the output Y . The estimators for the split point and the risk levels are applied to a problem arising in credit rating systems. In particular, we divide the range of individuals' creditworthiness into two groups. The first group has a higher probability of default and the second group has a lower one. We also stress connections between the standard estimator for the cutoff θ and concepts prevalent in credit risk modeling, for example, receiver operating characteristic. Copyright © 2014 John Wiley & Sons, Ltd.