Unified treatment of fermions and bosons

Dirac's matrices can be interpreted as an 8-rank covariant antisymmetric tensor field on an 11-dimensional manifold (space-time ×S ⁷) enforcing a linkage between the Lorentz transformation and rotations ofS ⁷, conferring spinorial properties on any quantity having an index in the inner spaceS ⁷.     

Novel enantioselective strong cation exchangers based on sulfodipeptide selectors: evaluation for enantiomer separation of chiral bases by nonaqueous capillary electrochromatography

Strong cation exchange (SCX)-type chiral stationary phases (CSPs) based on beta-amino sulfonic acid-terminated dipeptide derivatives as chiral selectors, immobilized on thiol-modified silica particles (3.5 microm), were synthesized and applied to enantiomer separations of chiral bases by nonaqueous capillary electrochromatography (CEC). The effect of structural variations of the sulfodipeptide selectors on the separation factors alpha was investigated. These studies included variation of the acid-terminal amino sulfonic acid residue, variation of the configurations, i.e., comparison of the diastereomeric (S,S)- and (R,S)-configurations of the sulfodipeptides, and finally comparison of sulfodipeptide selectors with corresponding beta-amino sulfonic acid analogs. In general, the capillary columns (100 microm ID) packed with the new SCX-type CSPs showed enantioselectivity for an elaborated set of chiral basic drugs in CEC acting by an enantioselective cation-exchange retention mechanism. N-[N-(4-Allyloxy-3,5-dichlorobenzoyl)-leucyl]-2-amino-3,3-dimethylbutane sulfonic acid, in particular with (R,S)-configuration, turned out to be a more effective SCX-type selector than a more rigid analog based on N-[N-(4-Allyloxy-3,5-dichlorobenzoyl)-leucyl]-2-pyrrolidinemethane sulfonic acid. Both of the former diastereomers were capable to baseline-resolve the enantiomers of ca. 40% of the tested basic chiral solutes including sympathomimetics and beta-blockers, while for the latter SCX-type CSPs only 10-20% of the selected solutes afforded resolutions > 1.5.     

Synthesis of 2-substituted benzofurans and indoles using functionalized titanium benzylidene reagents on solid phase

Titanium(IV) benzylidenes bearing a masked oxygen or nitrogen nucleophile in the ortho position were generated from thioacetals, using low-valent titanocene complex, Cp2Ti[P(OEt)3]2. Methylene acetal, alkyl ether, silyl ether, fluoro, tertiary amino, and N-alkyl, N-benzyl, N-prenyl, and N-silyl tert-butyl carbamate groups were tolerated in the titanium alkylidene reagents (Schrock carbenes). Aryl-chlorine bonds were stable to the titanium benzylidene functionality, but there was poor chemoselectivity for the reduction of the thioacetal in the presence of an aryl chloride. The titanium benzylidenes converted Merrifield and Wang resin-bound esters into enol ethers. The oxygen nucleophile was masked as a TMS ether, and when the resin-bound enol ethers bearing this ortho substituent were treated with 1% TFA in dichloromethane, benzofurans were released from resin in high yields. The chameleon catch strategy ensured excellent purity. In a similar way, N-alkylated and N-silylated tert-butyl carbamates were used for the synthesis of N-alkyl and N-Boc indoles, respectively. These traceless solid-phase syntheses of heterocycles are believed to involve postcleavage modification rather than cyclative termination.     

Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Nucleophile Ringöffnung von α-Nitrocyclopropancarbonsäure-arylestern mit sterisch geschützter,aber elektronisch wirksamer Carbonyl- und Nitro-Gruppe. Ein neues Prinzip der α-Aminosäure-Synthese (2-Aminobutansäure-a4-Synthon)

Nucleophilic Ring Opening of Aryl α-Nitrocyclopropanecarboxylates with Sterically Protected but Electronically Effective Carbonyl and Nitro Group. A New Principle of α-Amino Acid Synthesis (2-Aminobutanoic Acid a⁴-Synthon) The readily available 2,4,6-tri(tert-butyl)-and 2,6-di(tert-butyl)-4-methoxypahenol esters 2 of α-nitrocyclo-propanecarboxaylic acid ring opening with C-, N-, O-, and S-nucleophiles (cyanide, malonate, azide, anilines, alkoxides, phenoxides, thiolates) in DMF or alcohol solvents (80–95% yield). The products 6 – 14 are 2-nitrobutanoates with the newly introduced substituent in the 4-position. Reduction of the NO₂ group with Zn/AcOH/Ac₂O gives N-acetyl-α-amino acid esters 16 – 22 (40–90% yield). Subsequent oxidative cleavage (H₂O₂/HCOOH) of The p-methoxy-phenyl esters 18 and 20 produces free amino acids (65% 23 and 67% 24 , respectively). Thus, the nitro ester 2 corresponds to a 2-aminobutanoic-acid a⁴-synthon, it is a ‘homo-Michael acceptor’ producing γ-substituted α-amino acids.     

Herstellung enantiomerenreiner cis- oder trans-konfigurierter 2-(tert-Butyl)-3-methylimidazolidin-4-one aus den Aminosäuren (S)-Alanin, (S)-Phenylalanin, (R)-Phenylglycin, (S)-Methionin und (S)-Valin

Preparation of the Enantiomerically Pure cis- and trans-Configurated 2-(tert-Butyl)-3-methylimidazolidin-4-ones from the Amino Acids (S)-Alanine, (S)-Phenylalanine, (R)-Phenylglycine, (S)-Methionine, and (S)-Valine In contrast to α-hydroxy and α-mercapto carboxylic acids, simple α-amino acids do not form acetal-type derivatives ( 2 , X = NH) with pivalaldehyde. For the generation of amino-acid-derived chiral, nonracemic enolates (cf. 3 ), and hence, for the α-alkylation of amino acids without racemization and without an external chiral auxiliary, the imidazolidinones 12–14 were prepared diastereoselectively. To this end, the methyl or ethyl esters of amino-acid hydrochlorides were first converted to N-methylamides of amino acids which in turn were condensed with pivalaldehyde to give (neopentylidenamino)amides ( 11 ). These Schiff bases could be cyclized either to trans-or to cis-imidazolidinones ( 12, 14 and 13 , respectively), which were obtained in enantiomerically pure form after recrystallization. The enantiomeric purities were confirmed by HPLC with chiral stationary phases or by ¹H-NMR spectroscopy in the presence of chiral shift reagents. The configurations (cis, trans) were assigned by NOE measurements on 300- or 360-MHz ¹H-NMR spectrometers.     

Cobalt Chalcogenide Clusters. Synthesis,Characterization and DFT Calculations of [Co4Se2(CO)10] and [Co4Te2(CO)11]. Crystal Structure of [Co8Se4(CO)16(μ‐dppa)2]

The reactions of [Co₂(CO)₈] with E(SiMe₃)₂ (E = Se, Te) in CH₂Cl₂ result in the formation of the compounds [Co₄Se₂(CO)₁₀]> ( 1 ) and [Co₄Te₂(CO)₁₁] ( 2 ), respectively. Both cluster complexes have similar molecular structures in which the cobalt atoms form four‐membered rings with μ₄‐bridging chalcogen atoms (Se and Te) above and below the plane of the metal atoms and the carbonyl ligands as either terminal or μ₂‐bridging ligands. DFT‐calculations for both compounds have been carried out in order to obtain some more information about their electronic distribution. In the presence of the phosphine Ph₂PC≡CPPh₂ (dppa), the reaction of [Co₂(CO)₈] with Se(SiMe₃)₂ leads to the formation of [Co₈Se₄(CO)₁₆(μ‐dppa)₂] ( 3 ). During the reaction two molecules of [Co₂(CO)₈] have been added to the acetylene groups of the dppa ligands, whilst the remaining cobalt atoms coordinate to the phosphorus atoms of the phosphine. In this compounds the selenium atoms act as μ₃‐ligands, bridging the metal atoms bonded to the phosphorus with those bonded to the acetylene groups.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.