Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Nucleophile Ringöffnung von α-Nitrocyclopropancarbonsäure-arylestern mit sterisch geschützter,aber elektronisch wirksamer Carbonyl- und Nitro-Gruppe. Ein neues Prinzip der α-Aminosäure-Synthese (2-Aminobutansäure-a4-Synthon)

Nucleophilic Ring Opening of Aryl α-Nitrocyclopropanecarboxylates with Sterically Protected but Electronically Effective Carbonyl and Nitro Group. A New Principle of α-Amino Acid Synthesis (2-Aminobutanoic Acid a⁴-Synthon) The readily available 2,4,6-tri(tert-butyl)-and 2,6-di(tert-butyl)-4-methoxypahenol esters 2 of α-nitrocyclo-propanecarboxaylic acid ring opening with C-, N-, O-, and S-nucleophiles (cyanide, malonate, azide, anilines, alkoxides, phenoxides, thiolates) in DMF or alcohol solvents (80–95% yield). The products 6 – 14 are 2-nitrobutanoates with the newly introduced substituent in the 4-position. Reduction of the NO₂ group with Zn/AcOH/Ac₂O gives N-acetyl-α-amino acid esters 16 – 22 (40–90% yield). Subsequent oxidative cleavage (H₂O₂/HCOOH) of The p-methoxy-phenyl esters 18 and 20 produces free amino acids (65% 23 and 67% 24 , respectively). Thus, the nitro ester 2 corresponds to a 2-aminobutanoic-acid a⁴-synthon, it is a ‘homo-Michael acceptor’ producing γ-substituted α-amino acids.     

Herstellung enantiomerenreiner cis- oder trans-konfigurierter 2-(tert-Butyl)-3-methylimidazolidin-4-one aus den Aminosäuren (S)-Alanin, (S)-Phenylalanin, (R)-Phenylglycin, (S)-Methionin und (S)-Valin

Preparation of the Enantiomerically Pure cis- and trans-Configurated 2-(tert-Butyl)-3-methylimidazolidin-4-ones from the Amino Acids (S)-Alanine, (S)-Phenylalanine, (R)-Phenylglycine, (S)-Methionine, and (S)-Valine In contrast to α-hydroxy and α-mercapto carboxylic acids, simple α-amino acids do not form acetal-type derivatives ( 2 , X = NH) with pivalaldehyde. For the generation of amino-acid-derived chiral, nonracemic enolates (cf. 3 ), and hence, for the α-alkylation of amino acids without racemization and without an external chiral auxiliary, the imidazolidinones 12–14 were prepared diastereoselectively. To this end, the methyl or ethyl esters of amino-acid hydrochlorides were first converted to N-methylamides of amino acids which in turn were condensed with pivalaldehyde to give (neopentylidenamino)amides ( 11 ). These Schiff bases could be cyclized either to trans-or to cis-imidazolidinones ( 12, 14 and 13 , respectively), which were obtained in enantiomerically pure form after recrystallization. The enantiomeric purities were confirmed by HPLC with chiral stationary phases or by ¹H-NMR spectroscopy in the presence of chiral shift reagents. The configurations (cis, trans) were assigned by NOE measurements on 300- or 360-MHz ¹H-NMR spectrometers.     

Cobalt Chalcogenide Clusters. Synthesis,Characterization and DFT Calculations of [Co4Se2(CO)10] and [Co4Te2(CO)11]. Crystal Structure of [Co8Se4(CO)16(μ‐dppa)2]

The reactions of [Co₂(CO)₈] with E(SiMe₃)₂ (E = Se, Te) in CH₂Cl₂ result in the formation of the compounds [Co₄Se₂(CO)₁₀]> ( 1 ) and [Co₄Te₂(CO)₁₁] ( 2 ), respectively. Both cluster complexes have similar molecular structures in which the cobalt atoms form four‐membered rings with μ₄‐bridging chalcogen atoms (Se and Te) above and below the plane of the metal atoms and the carbonyl ligands as either terminal or μ₂‐bridging ligands. DFT‐calculations for both compounds have been carried out in order to obtain some more information about their electronic distribution. In the presence of the phosphine Ph₂PC≡CPPh₂ (dppa), the reaction of [Co₂(CO)₈] with Se(SiMe₃)₂ leads to the formation of [Co₈Se₄(CO)₁₆(μ‐dppa)₂] ( 3 ). During the reaction two molecules of [Co₂(CO)₈] have been added to the acetylene groups of the dppa ligands, whilst the remaining cobalt atoms coordinate to the phosphorus atoms of the phosphine. In this compounds the selenium atoms act as μ₃‐ligands, bridging the metal atoms bonded to the phosphorus with those bonded to the acetylene groups.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.     

INVESTIGATION INTO THE SPECTROSCOPY AND PHOTOISOMERIZATION OF A SERIES OF POLY (ETHYLENE GLYCOL) PEPTIDE SCHIFF BASES OF 11-cis RETINAL

Abstract— The 11-cis and all-trans isomers of a series of poly(ethylene glycol)-oligopeptide - Schiff bases as models for rhodopsin were synthesized and studied. Absorption data for certain of the PEG-peptide Schiff bases demonstrated that no intramolecular hydrogen-bonding (or protonation) occurs between the Schiff base and an acidic amino acid residue, as was previously thought. Photoisomerization of the 11-cis protonated and unprotonated Schiff bases were examined using both steady state and laser flash techniques. Also with 355 nm excitation (and additionally 532 nm in one case), an approximate 40% increase in quantum yield of isomerization (φ) occurred for all protonated PEG-peptide Schiff bases compared to the H⁺-n-butylamine counterparts (in methanol). In one case, a > 100% increase in φ was found in dichloromethane. These data show that PEG-oligopeptide Schiff bases are still further improved models for rhodopsin compared to their n-butylamine analogs.     

Darstellung und Charakterisierung einige Thiocyanat- und Selenocyanat-Komplexe von Übergangsmetallen

Some 6:1 thiocyanate complexes of Fe^III, Mo^III, Ru^III, Os^III, Ir^III and some 6:1 or 4:1 selenocyanate complexes of Fe^II, Fe^III, Mo^III, Rh^III, Pd^II, Pt^II, and Au^III have been prepared as salts of large organic cations. The compounds are characterized by their infra-red spectra and by conductance measurements. In particular the linkage property of the thiocyanate and selenocyanate ligand is discussed together with the consequences it has on the AHRLAND -CHATT -DAVIES -PEARSON classification of the central ions.     

Die Projektivitätengruppe der Moulton-Ebenen

The group of projectivities is calculated for the Moulton-Planes M_k, k>1: it does not depend on k and consists of all piecewise projective mappings of the circle onto itself.     

Dynamic kinetic resolution of transient hemiketals: a strategy for the desymmetrisation of prochiral oxetanols

Identification of an electron poor trifluoroacetophenone allows the formation of uniquely stable hemiketals from prochiral oxetanols. When exposed to a cobalt(ii) catalyst, efficient ring-opening to densely functionalized dioxolanes is observed. Mechanistic studies suggest an unprecedented redox process between the cobalt(ii) catalyst and the hemiketal that initiates the oxetane-opening. Based on this observation, a dynamic kinetic resolution of the transient hemiketals is explored that uses a Katsuki-type ligand for stereoinduction (up to 99 : 1 dr and 96 : 4 er) and allows a variety of 1,3-dioxolanes to be accessed (20 examples up to 98% yield).

Desymmetrization of prochiral oxetanols via an electron-deficient hemiketal intermediate is achieved. Key to this process is the catalyst''s chiral recognition of one of the two hemiketal enantiomers enabling an efficient dynamic kinetic resolution.