Effect of aspect ratio of vertically aligned copper nanowires in the presence of cellulose nanofibers on the thermal conductivity of epoxy composites

The composites comprising vertically aligned network of copper nanowires (CuNWs) in the presence of cellulose nanofibers were fabricated by using the freeze‐templating method and the effect of aspect ratio (A/R) of CuNWs on the thermal conductivity of epoxy composites was investigated. The thermal conductivity of epoxy composites increased to 0.79 W m^?1 K^?1 at 1.12 vol% of high A/R CuNWs loading, corresponding to the thermal conductivity enhancement of 365% as compared to the pure epoxy. The thermal conductivity of vertically aligned higher A/R CuNWs/epoxy, which is 38.5% and 51.9% higher than those of the lower A/R CuNWs and the randomly aligned CuNWs, respectively. The application of the epoxy composites in heat dissipation was demonstrated by the temperature changes of composites on a hot plate with the increase of heating time. These results indicate that the thermally conductive composites in this study could be applied for thermal dissipating materials in electronic devices.     

On the embedding of graphs into graphs with few eigenvalues

A graph is called of type k if it is connected, regular, and has k distinct eigenvalues. For example graphs of type 2 are the complete graphs, while those of type 3 are the strongly regular graphs. We prove that for any positive integer n, every graph can be embedded in n cospectral, non-isomorphic graphs of type k for every k ≥ 3. Furthermore, in the case k ≥ 5 such a family of extensions can be found at every sufficiently large order. Some bounds for the extension will also be given. © 1996 John Wiley & Sons, Inc.     

Combining Complex and Radial Slave Boson Fields within the Kotliar–Ruckenstein Representation of Correlated Impurities

The gauge symmetry group of any slave boson representation allows to gauge away the phase of bosonic fields. One benefit of this radial field formulation is the elimination of spurious Bose condensations when saddle-point approximation is performed. Within the Kotliar–Ruckenstein representation, three of the four bosonic fields can be radial while the last one has to remain complex. In this work, the procedure to carry out the functional integration involving constrained fermionic fields, complex bosonic fields, and radial bosonic fields is presented. The correctness of the representation is verified by exactly evaluating the partition function and the Green's function of the Hubbard model in the atomic limit.     

Statistical Physics Approach to Liquid Crystals: Dynamics of Mobile Potts Model Leading to Smectic Phase,Phase Transition by Wang–Landau Method

We study the nature of the smectic–isotropic phase transition using a mobile 6-state Potts model. Each Potts state represents a molecular orientation. We show that with the choice of an appropriate microscopic Hamiltonian describing the interaction between individual molecules modeled by a mobile 6-state Potts spins, we observe the smectic phase dynamically formed when we cool the molecules from the isotropic phase to low temperatures (T). In order to elucidate the order of the transition and the low-T properties, we use the high-performance Wang–Landau flat energy-histogram technique. We show that the smectic phase goes to the liquid (isotropic) phase by melting/evaporating layer by layer starting from the film surface with increasing T. At a higher T, the whole remaining layers become orientationally disordered. The melting of each layer is characterized by a peak of the specific heat. Such a succession of partial transitions cannot be seen by the Metropolis algorithm. The successive layer meltings/evaporations at low T are found to have a first-order character by examining the energy histogram. These results are in agreement with experiments performed on some smectic liquid crystals.     

High sensitivity conductivity-temperature-depth sensing based on an optical microfiber coupler combined fiber loop

In order to meet the practical needs of all-fiber conductivity-temperature-depth sensors with high sensitivity,compact structure,and easy packaging,this Letter uses a microfiber coupler combined with fiber loop(MCFL)reflective photonic device to conduct salinity,temperature,and deep sensing experiments.These MCFLs’dynamic range and resolution of salinity,temperature,and depth can meet the requirements of actual marine environment monitoring.This structure opens up a new design idea for the practical research of microfiber coupler-based marine environmental parameter sensors.     

Effect of the Dispersing Agent on the Electrochemical Response of Glassy Carbon Electrodes Modified with Dispersions of Carbon Nanotubes

The electrochemical response of a glassy carbon electrode modified with carbon nanotubes (CNT) dispersed in two solvents, water and DMF, and two polymers, chitosan and Nafion is reported. The films were homogeneous when the dispersing agent was water or DMF. In the case of polymers, the surfaces present areas with different density of CNTs. A more sensitive electrochemical response was obtained when CNTs are dispersed in the solvents. In the case of CNT dispersed with polymers, the nature of the polymer demonstrated to be a critical parameter not only for dispersing the nanotubes but also for the electrochemical activity of the resulting electrodes.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Relevance of gaseous flows in electrochemically assisted soil thermal remediation

Treatment of polluted soil is one of the priorities in the search of a more sustainable planet. Electrochemically assisted soil remediation has been considered a good option for removing organic contaminants contained in soil, including the removal of volatile organic compounds, associated with gaseous streams produced during the treatment. Also, recently, electrochemical gas treatment technologies have been appointed as promising for the treatment of volatile organic compounds. In this work, we review the current opinion about the most recent studies in both areas. The first section focuses on the production of gaseous compounds during soil remediation by conventional and electrochemical systems. The second section describes the recent progress in the integration of adsorption and absorption with electrochemical processes. Finally, we discuss the holistic application of assisted electrochemical technologies in soil remediation, considering also emerging processes recently published in the literature.     

Hydrazones of 4-(Trifluoromethyl)benzohydrazide as New Inhibitors of Acetyl- and Butyrylcholinesterase

Based on the broad spectrum of biological activity of hydrazide–hydrazones, trifluoromethyl compounds, and clinical usage of cholinesterase inhibitors, we investigated hydrazones obtained from 4-(trifluoromethyl)benzohydrazide and various benzaldehydes or aliphatic ketones as potential inhibitors of acetylcholinesterase (AChE) and butyrylcholinesterase (BuChE). They were evaluated using Ellman’s spectrophotometric method. The hydrazide–hydrazones produced a dual inhibition of both cholinesterase enzymes with IC₅₀ values of 46.8–137.7 µM and 19.1–881.1 µM for AChE and BuChE, respectively. The majority of the compounds were stronger inhibitors of AChE; four of them (2-bromobenzaldehyde, 3-(trifluoromethyl)benzaldehyde, cyclohexanone, and camphor-based 2o, 2p, 3c, and 3d, respectively) produced a balanced inhibition of the enzymes and only 2-chloro/trifluoromethyl benzylidene derivatives 2d and 2q were found to be more potent inhibitors of BuChE. 4-(Trifluoromethyl)-N’-[4-(trifluoromethyl)benzylidene]benzohydrazide 2l produced the strongest inhibition of AChE via mixed-type inhibition determined experimentally. Structure–activity relationships were identified. The compounds fit physicochemical space for targeting central nervous systems with no apparent cytotoxicity for eukaryotic cell line together. The study provides new insights into this CF₃-hydrazide–hydrazone scaffold.     

Magnetic nanotips: the realisation of an atomic-scale beam-splitter

We present the first realisation of ferromagnetic Fe nanotips. Studies of the field emitted beams of electrons and metallic ions above and under the Curie temperature T_c were made. We have observed a reversible splitting of the electron beams when the temperature crossed through T_c and multiple spot patterns for the emitted metallic ion beams. These phenomena were not observed with Fe microtips or non-magnetic nanotips and thus were correlated to a strong magnetic interaction at the atomic scale apex of the nanotips. The Fe nanotips constitute an atomic scale beam-splitter.