Highly enantioselective Cu-catalysed asymmetric 1,4-addition of diphenylzinc to cyclohexenone

Highly enantioselective Cu-catalysed 1,4-addition of diphenylzinc to cyclohexenone has been achieved for the first time using a monodentate phosphoramidite ligand.     

New developments in zinc-catalyzed asymmetric hydrosilylation of ketones with PMHS

The influence of structural modifications of the diamine ligand and the ZnR₂ precursor in the [ZnR₂-diamine]-catalyzed asymmetric hydrosilylation of prochiral ketones with PMHS in aprotic medium is reported. A new diamine ligand giving up to 91% ee in the reduction of acetophenone is described. The scope of this reduction system has been investigated using variously functionalized ketones and some deactivation pathways have been identified.     

AlPO-Catalysed asymmetric Diels-Alder reactions of cyclopentadiene with chiral acrylates

Reactions of cyclopentadiene with several chiral acrylates are studied and compared with the same reactions catalysed by Zn(II)-exchanged K10 montmorillonite. In general, amorphous AlPO₄ is a more efficient catalyst than the clay. In particular, the reaction of cyclopentadiene with (−)-8-phenylmenthyl acrylate leads to 74% diastereomeric excess (d.e.) in methylene chloride at low temperatures. This result constitutes the highest asymmetric induction described to date for a solid-catalysed asymmetric Diels-Alder reaction. When the reactions are carried out in the absence of a solvent a noticeable decrease in selectivity is observed, probably due to an extensive competition of the non-catalysed reaction.     

Titanocene-catalyzed cascade cyclization of epoxypolyprenes: straightforward synthesis of terpenoids by free-radical chemistry

The titanocene-catalyzed cascade cyclization of epoxypolyenes, which are easily prepared from commercially available polyprenoids, has proven to be a useful procedure for the synthesis of C(10), C(15), C(20), and C(30) terpenoids, including monocyclic, bicyclic, and tricyclic natural products. Both theoretical and experimental evidence suggests that this cyclization takes place in a nonconcerted fashion via discrete carbon-centered radicals. Nevertheless, the termination step of the process seems to be subjected to a kind of water-dependent control, which is unusual in free-radical chemistry. The catalytic cycle is based on the use of the novel combination Me(3)SiCl/2,4,6-collidine to regenerate the titanocene catalyst. In practice this procedure has several advantages: it takes place at room temperature under mild conditions compatible with different functional groups, uses inexpensive reagents, and its end step can easily be controlled to give exocyclic double bonds by simply excluding water from the medium.     

Asymmetric multicomponent reactions (AMCRs): the new frontier

Asymmetric multicomponent reactions involve the preparation of chiral compounds by the reaction of three or more reagents added simultaneously. This kind of addition and reaction has some advantages over classic divergent reaction strategies, such as lower costs, time, and energy, as well as environmentally friendlier aspects. All these advantages, together with the high level of stereoselectivity attained in some of these reactions, will force chemists in industry as in academia to adopt this new strategy of synthesis, or at least to consider it as a viable option. The positive aspects as well as the drawbacks of this strategy are discussed in this Review.     

Synthesis, solid-state structure, and bonding analysis of the beryllocenes [Be(C5Me4H)2], [Be(C5Me5)2], and [Be(C5Me5)(C5Me4H)

The beryllocenes [Be(C(5)Me(4)H)(2)] (1), [Be(C(5)Me(5))(2)] (2), and [Be(C(5)Me(5))(C(5)Me(4)H)] (3) have been prepared from BeCl(2) and the appropriate KCp' reagent in toluene/diethyl ether solvent mixtures. The synthesis of 1 is facile (20 degrees C, overnight), but generation of decamethylberyllocene 2 demands high temperatures (ca. 115 degrees C) and extended reaction times (3-4 days). The mixed-ring beryllocene 3 is obtained when the known [(eta(5)-C(5)Me(5))BeCl] is allowed to react with K[C(5)Me(4)H], once more under somewhat forcing conditions (115 degrees C, 36 h). The structures of the three metallocenes have been determined by low-temperature X-ray studies. Both 1 and 3 present eta5/eta1 geometries of the slip-sandwich type, whereas 2 exhibits an almost regular, ferrocene-like, sandwich structure. In the mixed-ring compound 3, C(5)Me(5) is centrally bound to beryllium and the eta(1)-C(5)Me(4)H ring bonds to the metal through the unique CH carbon atom. This is also the binding mode of the eta(1)-ring of 1. To analyze the nature of the bonding in these molecules, theoretical calculations at different levels of theory have been performed on compounds 2 and 3, and a comparison with the bonding in [Be(C(5)H(5))(2)] has been made. As for the latter molecule, energy differences between the eta5/eta5 and the eta5/eta1 structures of 2 are very small, being of the order of a few kcal mol(-1). Constrained space orbital variations (CSOV) calculations show that the covalent character in the bonding is larger for [Be(C(5)Me(5))(2)] than for [Be(C(5)H(5))(2)] due to larger charge delocalization and to increased polarizability of the C(5)Me(5) fragment.     

Rapid and sensitive method for determining free amino acids in honey by gas chromatography with flame ionization or mass spectrometric detection

This paper describes a rapid, sensitive and specific method for determination of free amino acids in honey involving a new reaction of derivatization and gas chromatography (GC) with flame ionization (FID) and mass spectrometric (MS) detection. The method allows the determination of 22 free amino acids in honey samples in a short time: 8 and 5 min for GC-FID and GC-MS, respectively. Quantitation was performed using Norvaline as internal standard, with detection limits ranging between 0.112 and 1.795 mg/L by GC-FID and between 0.001 and 0.291 mg/L by GC-MS in the selected-ion monitoring mode. The method was validated and applied to a set of 74 honey samples belonging to four different botanical origins: eucaliptus, rosemary, orange and heather. The statistical treatment of data shows a correct classification of different origins over 90%.     

Synthesis and Spectroscopic Characterization of New Lead(II) Thiosaccharinates. Molecular Structure of Bis(thiosaccharinato)tetrakis(pyridine)dilead(II) and Thiosaccharinato‐bis(1,10‐phenantroline)lead(II) Thiosaccharinate

Four new lead(II) thiosaccharinate complexes: [Pb(tsac)₂H₂O] (1) (tsac: thiosaccharinate anion), [Pb₂(tsac)₄(py)₄] (2) (py: pyridine), [Pb(tsac)(o‐phen)₂](tsac)·CH₃CN (3) (o‐phen: 1,10‐phenantroline), and [Pb(tsac)₂(bipy)] (4) (bipy: 2,2′‐bipyridine) were prepared. The infrared and electronic spectra as well as the thermal analysis of all the compounds were recorded and discussed. The thiosaccharinate anion acts in three different coordination forms, one of then reported for the first time. The crystal structures of complexes 2 and 3 have been determined by single crystal X‐ray diffractometry. In complex 2 , two monomeric moieties are joined together forming a symmetric bis‐μ‐sulphur bridged dimer by interaction of two lead(II) atoms through the exocyclic sulphur atoms of two thiosaccharinate ligands. The seven‐fold coordination sphere of each lead atom is completed by two pyridine nitrogen atoms and by another sulfur and two nitrogen atoms of the thiosaccharinate anions. In complex 3 , the lead(II) atom is coordinated by four nitrogen atoms of two 1,10‐phenantroline molecules and by the sulfur and nitrogen atoms of one thiosaccharinate ion. The second anion has an electrostatic interaction with the nucleus.     

Molecular volume calculation using AM1 semi-empirical method toward diffusion coefficients and electrophoretic mobility estimates in aqueous solution

Diffusion coefficients and electrophoretic mobility are two important physicochemical parameters used in mass transport phenomenon studies. The volume of the solute is required to determine or estimate these parameters. Classical methods, such as the LeBas method are commonly used. However, although valid, this method may represent a boring and time-consuming task, depending on the nature and number of compounds to be calculated. In this study, the volumes of a series of neutral and charged substances of the main functional groups present in organic molecules, amino acids, drugs and diverse compounds, such as cytosine and glucose, were calculated according to the LeBas method (V_M) and the AM1 semi-empirical method, V_W(AM1). The latter showed to be statistically coincident with the former. Employed as a pure value or corrected by the LeBas molar volume, the AM1 molecular volume was also demonstrated to estimate the diffusion coefficients in infinite aqueous dilution within an acceptable average error, according to the Othmer–Thakar, Wilke–Chang and Hayduk–Laudie methods, as well as the electrophoretic mobility of charged substances, such as carboxylates and protonated amines. According to these results, the AM1 method was seen to be statistically valid to calculate molecular volume. Many advantages in the construction of most diverse structures were noted, as well as a reduction in time and an increase in the quality of the information, when run on molecular modeling software.