Excited-State Dynamics of Thienoguanosine,an Isomorphic Highly Fluorescent Analogue of Guanosine

Thienoguanosine (^thG) is an isomorphic analogue of guanosine with promising potentialities as fluorescent DNA label. As a free probe in protic solvents, ^thG exists in two tautomeric forms, identified as the H1, being the only one observed in nonprotic solvents, and H3 keto–amino tautomers. We herein investigate the photophysics of ^thG in solvents of different polarity, from water to dioxane, by combining time-resolved fluorescence with PCM/TD-DFT and CASSCF calculations. Fluorescence lifetimes of 14.5–20.5 and 7–13 ns were observed for the H1 and H3 tautomers, respectively, in the tested solvents. In methanol and ethanol, an additional fluorescent decay lifetime (≈3 ns) at the blue emission side (λ≈430 nm) as well as a 0.5 ns component with negative amplitude at the red edge of the spectrum, typical of an excited-state reaction, were observed. Our computational analysis explains the solvent effects observed on the tautomeric equilibrium. The main radiative and nonradiative deactivation routes have been mapped by PCM/TD-DFT calculations in solution and CASSCF in the gas phase. The most easily accessible conical intersection, involving an out-of plane motion of the sulfur atom in the five-membered ring of ^thG, is separated by a sizeable energy barrier (≥0.4 eV) from the minimum of the spectroscopic state, which explains the large experimental fluorescence quantum yield.     

Chemical modification of poly(lactic acid) induced by thermal decomposition of N‐acetoxy‐phthalimide during extrusion

Chemical modification of poly(lactic acid) (PLA) with N‐acetoxy‐phthalimide (NAPI) was performed in the melt by reactive extrusion, without using any peroxide initiator. The aminyl and nitroxide radicals produced from the NAPI thermal degradation, were, respectively, used (a) to create PLA macroradicals, and (b) to functionalize the PLA samples through nitroxide radical coupling. Depending on the extrusion temperature and the initial NAPI concentration, grafting rates up to 0.24 mol % were measured, modifying the PLA optical properties. This study represents an original new way of modification of PLA without the use of conventional peroxide initiators. Indeed, the undesirable side reactions (PLA branching or crosslinking) usually observed when using peroxides to initiate the radical grafting of PLA were avoided when using NAPI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 120–129     

Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

Pierre Turq,an inspirational scientist in charge and at interfaces

Pierre Turq has made decisive contributions to the theory and to the multiscale simulation of charged systems, such as molten salts, electrolyte solutions and colloidal suspensions, in the bulk, at interfaces and under confinement. His research line focussed on dynamical properties and was characterised by constant efforts to connect his theoretical work to both experiments and practical applications. In this article, his colleagues and former students pay a tribute to his past and current research interests by illustrating some recent developments accomplished in his laboratory.     

On well-posedness for some dispersive perturbations of Burgers' equation

We show that the Cauchy problem for a class of dispersive perturbations of Burgers' equations containing the low dispersion Benjamin–Ono equation

${?}_{t}u?D_x^{\alpha }{?}_{x}u={?}_x(u^2),0<\alpha \le 1,$

is locally well-posed in $H^s(\mathbb{R})$ when $s>s_{\alpha }:=\frac{3}{2}?\frac{5\alpha }{4}$. As a consequence, we obtain global well-posedness in the energy space $H^{\frac{\alpha }{2}}(\mathbb{R})$ as soon as $\frac{\alpha }{2}>s_{\alpha }$, i.e. $\alpha >\frac{6}{7}$.     

Practical use of variational principles for modeling water waves

This paper describes a method for deriving approximate equations for irrotational water waves. The method is based on a ‘relaxed’ variational principle, i.e., on a Lagrangian involving as many variables as possible. This formulation is particularly suitable for the construction of approximate water wave models, since it allows more freedom while preserving a variational structure. The advantages of this relaxed formulation are illustrated with various examples in shallow and deep waters, as well as arbitrary depths. Using subordinate constraints (e.g., irrotationality or free surface impermeability) in various combinations, several model equations are derived, some being well-known, other being new. The models obtained are studied analytically and exact traveling wave solutions are constructed when possible.     

Electron affinities of biscyclopentadienyl and phospholyl uranium(IV) borohydride complexes: Experimental and DFT studies

Electron affinities (EAs) of a series of biscyclopentadienyl and phospholyl uranium(IV) complexes L₂U(BH₄)₂ [L₂ = Cp₂, (tmp)₂, (tBuCp)₂, (Cp*)(tmp) and Cp*₂] related to the U(III)/U(IV) redox system were calculated using relativistic Density Functional Theory (DFT) based methods coupled with the Conductor-like Screening Model for Real Solvents (COSMO-RS) approach. Electrochemical measurements of half-wave potentials in solution (tetrahydrofuran THF) were carried out for all these compounds under the same rigorous conditions. A good correlation (r² = 0.99) is obtained between the calculated EA values, at the ZORA/BP86/TZ2P level, and the half-wave reduction potentials measured by electrochemistry. The investigations bring to light the importance of spin-orbit coupling and solvent effect and the use of a large basis set in order to achieve such a good agreement between theory and experiment. The study confirms the instability of the Cp₂U(BH₄)₂ complex during the reduction process. The influence of the substituted aromatic ligand L₂, namely their electron donating ability, on EA was studied. The role of involved orbitals (singled occupied molecular orbital –SOMO– of anionic species or lowest unoccupied molecular orbital –LUMO– of neutral species) in the redox process was revealed.     

New Insights into the Reactivity of Cisplatin with Free and Restrained Nucleophiles: Microsolvation Effects and Base Selectivity in Cisplatin–DNA Interactions

The reactivity of cisplatin towards different nucleophiles has been studied by using density functional theory (DFT). Water was considered first to analyze the factors that govern the transformation of cisplatin into more electrophilic aquated species by using an activation‐strain model. It was found that the selectivity and reactivity of cisplatin is a delicate trade‐off between strain and interaction energies and that the second chloride is a worse leaving group than the first. When similar studies were carried out with imidazole, guanine (G), and adenine (A), it was found that in general the second nucleophilic substitution reactions have lower activation barriers than the first ones. Finally, simulations of the structural restrictions imposed by the DNA scaffold in intra‐ and interstrand processes showed that the geometries of the reaction products are nonoptimal with respect to the unrestrained A and G nucleophiles, although the energetic cost is not considerable under physiological conditions, which thus permits nucleophilic substitution reactions that lead to highly distorted DNA.     

Highly Efficient Transition Metal Nanoparticle Catalysts in Aqueous Solutions

A ligand design is proposed for transition metal nanoparticle (TMNP) catalysts in aqueous solution. Thus, a tris(triazolyl)‐polyethylene glycol (tris‐trz‐PEG) amphiphilic ligand, 2 , is used for the synthesis of very small TMNPs with Fe, Co, Ni, Cu, Ru, Pd, Ag, Pt, and Au. These TMNP‐ 2 catalysts were evaluated and compared for the model 4‐nitrophenol reduction, and proved to be extremely efficient. High catalytic efficiencies involving the use of only a few ppm metal of PdNPs, RuNPs, and CuNPs were also exemplified in Suzuki–Miyaura, transfer hydrogenation, and click reactions, respectively.     

Heat-treated Saccharomyces cerevisiae for antimony speciation and antimony(III) preconcentration in water samples

An analytical method was developed for antimony speciation and antimony(III) preconcentration in water samples. The method is based on the selective retention of Sb(III) by modified Saccharomyces cerevisiae in the presence of Sb(V). Heat, caustic and solvent pretreatments of the biomass were investigated to improve the kinetics and thermodynamics of Sb(III) uptake process at room temperature. Heating for 30 min at 80 degrees C was defined as the optimal treatment. Antimony accumulation by the cells was independent of pH (5-10) and ionic strength (0.01-0.1 mol L(-1)). 140 mg of yeast and 2h of contact were necessary to ensure quantitative sequestration of Sb(III) up to 750 microg L(-1). In these conditions, Sb(V) was not retained. Sb(V) was quantified in sorption supernatant by inductively coupled plasma mass spectrometry (ICP-MS) or inductively coupled plasma optical emission spectrometry (ICP-OES). Sb(III) was determined after elution with 40 mmol L(-1) thioglycolic acid at pH 10. A preconcentration factor close to nine was achieved for Sb(III) when 100mL of sample was processed. After preconcentration, the detection limits for Sb(III) and Sb(V) were 2 and 5 ng L(-1), respectively, using ICP-MS, 7 and 0.9 microg L(-1) using ICP-OES. The proposed method was successfully applied to the determination of Sb(III) and Sb(V) in spiked river and mineral water samples. The relative standard deviations (n=3) were in the 2-5% range at the tenth microg L(-1) level and less than 10% at the lowest Sb(III) and Sb(V) tested concentration (0.1 microg L(-1)). Corrected recoveries were in all cases close to 100%.