Electrochemical Properties of Carbon Fibers from Felts

Electrochemical behaviors of individual carbon fibers coming from carbon felts were investigated using two different redox couples, 1,1′-dimethanolferrocene and potassium ferrocyanide. Electrochemical responses were examined after different oxidation treatments, then simulated and interpreted using the Kissa 1D software and existing models. Our experiments indicate that a crude carbon fiber behaves as an assembly of sites with different electrochemical reactivities. In such case, the Butler–Volmer law is not appropriate to describe the electron transfer kinetics because of the large created overpotential. Oxidation of the fiber erases the effect by increasing the kinetics of the electron transfer probably by a homogenization and increase of the reactivity on all the fiber. Additionally, analysis of the signal shows the large influence of the convection that affects the electrochemical response even at moderate scan rates (typically below 0.1–0.2 V s⁻¹).     

Six-dimensional quantum dynamics of (v=0,j=0)D2 and of (v=1,j=0)H2 scattering from Cu111

We report six-dimensional quantum dynamics calculations of the dissociative scattering of molecular hydrogen from the copper111 surface. Two potential energy surfaces are investigated and the results are compared with experiment. Our study completes the preliminary work of Somers et al. [Chem. Phys. Lett. 360, 390 (2002)] and focuses on the role of initial vibrational excitation and on isotopic effects. None of the two investigated potential energy surfaces is found satisfactory: the use of neither potential yields reaction and vibrational excitation probabilities and vibrational efficacies that are in close agreement with experiment. In addition to showing the shortcomings of existing potential energy surfaces we point out an inconsistency in the experimental fits for D2.     

Assignment of the EPR spectrum of 5,5-dimethyl-1-pyrroline N-oxide (DMPO) superoxide spin adduct

[structure: see text] Spin trapping consists of using a nitrone or a nitroso compound to "trap" an unstable free radical as a long-lived nitroxide that can be characterized by electron paramagnetic resonance (EPR) spectroscopy. The formation of DMPO-OOH, the spin adduct resulting from trapping superoxide (O(2)(*)(-)) with 5,5-dimethyl-1-pyrroline N-oxide (DMPO), has been exploited to detect the generation of superoxide in a wide variety of biological and chemical systems. The 12-line EPR spectrum of DMPO-OOH has been either reported or mentioned in more than a thousand papers. It has been interpreted as resulting from the following couplings: A(N) approximately 1.42 mT, A(H)beta approximately 1.134 mT, and A(H)gamma(1H) approximately 0.125 mT. However, the DMPO-OOH EPR spectrum has an asymmetry that cannot be reproduced when the spectrum is calculated considering a single species. Recently, it was proposed that the 0.125 mT splitting was misassigned and actually results from the superimposition of two individual EPR spectra associated with different conformers of DMPO-OOH. We have prepared 5,5-dimethyl-[3,3-(2)H(2)]-1-pyrroline N-oxide (DMPO-d(2)), and we showed that the EPR spectrum of the corresponding superoxide spin adduct is composed of only six lines, in agreement with the assignment of the 0.125 mT splitting to a gamma-splitting from a hydrogen atom bonded to carbon 3 of DMPO. This result was supported by DFT calculations including water solvation, and the asymmetry of the DMPO-OOH EPR spectrum was nicely reproduced assuming a chemical exchange between two conformers.     

Unsaturated four-membered N-heterocycles: From synthesis to applications

The ubiquity of strained motifs in drug discovery has recently witnessed a large regain of interest, as such scaffold can be used to modulate the properties of drug candidates. Unsaturated N-containing four-membered heterocycles present unique opportunities to access functionalized azetidines, which play an essential role in pharmacological studies. Even though those unsaturated patterns have been much less reported than the corresponding saturated versions, the consequent impact that those structures could have on molecular design with implementation of strained modules deserves to be summarized. In this review, synthetic accesses to substituted azetes, 1-azetines and 2-azetines are depicted, as well as their involvement in further transformations.     

New Insights into the Reactivity of Cisplatin with Free and Restrained Nucleophiles: Microsolvation Effects and Base Selectivity in Cisplatin–DNA Interactions

The reactivity of cisplatin towards different nucleophiles has been studied by using density functional theory (DFT). Water was considered first to analyze the factors that govern the transformation of cisplatin into more electrophilic aquated species by using an activation‐strain model. It was found that the selectivity and reactivity of cisplatin is a delicate trade‐off between strain and interaction energies and that the second chloride is a worse leaving group than the first. When similar studies were carried out with imidazole, guanine (G), and adenine (A), it was found that in general the second nucleophilic substitution reactions have lower activation barriers than the first ones. Finally, simulations of the structural restrictions imposed by the DNA scaffold in intra‐ and interstrand processes showed that the geometries of the reaction products are nonoptimal with respect to the unrestrained A and G nucleophiles, although the energetic cost is not considerable under physiological conditions, which thus permits nucleophilic substitution reactions that lead to highly distorted DNA.     

Heat-treated Saccharomyces cerevisiae for antimony speciation and antimony(III) preconcentration in water samples

An analytical method was developed for antimony speciation and antimony(III) preconcentration in water samples. The method is based on the selective retention of Sb(III) by modified Saccharomyces cerevisiae in the presence of Sb(V). Heat, caustic and solvent pretreatments of the biomass were investigated to improve the kinetics and thermodynamics of Sb(III) uptake process at room temperature. Heating for 30 min at 80 degrees C was defined as the optimal treatment. Antimony accumulation by the cells was independent of pH (5-10) and ionic strength (0.01-0.1 mol L(-1)). 140 mg of yeast and 2h of contact were necessary to ensure quantitative sequestration of Sb(III) up to 750 microg L(-1). In these conditions, Sb(V) was not retained. Sb(V) was quantified in sorption supernatant by inductively coupled plasma mass spectrometry (ICP-MS) or inductively coupled plasma optical emission spectrometry (ICP-OES). Sb(III) was determined after elution with 40 mmol L(-1) thioglycolic acid at pH 10. A preconcentration factor close to nine was achieved for Sb(III) when 100mL of sample was processed. After preconcentration, the detection limits for Sb(III) and Sb(V) were 2 and 5 ng L(-1), respectively, using ICP-MS, 7 and 0.9 microg L(-1) using ICP-OES. The proposed method was successfully applied to the determination of Sb(III) and Sb(V) in spiked river and mineral water samples. The relative standard deviations (n=3) were in the 2-5% range at the tenth microg L(-1) level and less than 10% at the lowest Sb(III) and Sb(V) tested concentration (0.1 microg L(-1)). Corrected recoveries were in all cases close to 100%.     

Comprehensive two-dimensional gas chromatography for enhanced analysis of naphthas: new column combination involving permethylated cyclodextrin in the second dimension

A new column association using comprehensive two-dimensional gas chromatography for the detailed molecular analysis of hydrocarbon mixtures is reported in this paper. In order to compare the impact of two different secondary columns, a novel column combination relying on a GC x 2GC system was used. This system is based on a non-polar first column (PONA) combined with both a permethylated beta-cyclodextrin (beta-Dex 120) stationary phase and a polysilphenylensiloxane (BPX 50) in the second dimension. Compared to BPX 50 stationary phase, the implementation of beta-cyclodextrin columns as the second dimension was found to improve the resolution between paraffins and naphthenes in the naphtha range but not in the middle distillate range. Attempts to improve the results and to understand the interaction mechanism remained unsuccessful. Therefore, the benefits of the beta-Dex 120-column are only demonstrated on heavy naphtha cut for the quantitation of hydrocarbons.     

Walking metals in d8···d8 hetero-bimetallic complexes: an original dynamic phenomenon

In the course of our investigations on polymetallic complexes derived from 1,3-bis(thiophosphinoyl)indene (Ind(Ph(2)P=S)(2)), we observed original fluxional behavior and report herein a joint experimental/computational study of this dynamic process. Starting from the indenylidene chloropalladate species [Pd{Ind(Ph(2) P=S)(2)}Cl](-) (1), the new Pd(II)···Rh(I) hetero-bimetallic pincer complex [PdCl{Ind(Ph(2) P=S)(2)}Rh(nbd)] (2; nbd=2,5-norbornadiene) was prepared. X-ray crystallography and DFT calculations substantiate the presence of a d(8)···d(8) interaction. According to multinuclear variable-temperature NMR spectroscopic experiments, the pendant {Rh(nbd)} fragment of 2 readily shifts in solution at room temperature between the two edges of the SCS tridentate ligand. To assess the role of the pincer-based polymetallic structure on this fluxional behavior, the related monometallic Rh complex [Rh{IndH(Ph(2) P=S)(2)}(nbd)] (3) was prepared. No evidence for a metal shift was observed in that case, even at high temperature, thus indicating that inplane pincer coordination to the Pd center plays a crucial role. The previously described Pd(II)···Ir(I) bimetallic complex 4 exhibited fluxional behavior in solution, but with a significantly higher activation barrier than 2. This finding demonstrates the generality of this metal-shift process and the strong influence of the involved metal centers on the associated activation barrier. DFT calculations were performed to shed light onto the mechanism of such metal-shift processes and to identify the factors that influence the associated activation barriers. Significantly different pathways were found for bimetallic complexes 2 and 4 on one hand and the monometallic complex 3 on the other hand. The corresponding activation barriers predicted computationally are in very good agreement with the experimental observations.     

Unraveling the crystallization mechanism of CoAPO-5 molecular sieves under hydrothermal conditions

The hydrothermal crystallization of CoAPO-5 molecular sieves has been studied using time-resolved in-situ SAXS/WAXS, UV-vis, Raman, and XAS. Data collected during heating to 180 degrees C allowed the observation of different steps occurring during the transformation of the amorphous gel into a crystalline material from a macroscopic and atomic perspective. Raman spectroscopy detected the initial formation of Al-O-P bonds, whereas SAXS showed that these gel particles had a broad size distribution ranging from ca. 7 to 20 nm before crystallization began. WAXS showed that this crystallization was sharp and occurred at around 160 degrees C. Analysis of the crystallization kinetics suggested a one-dimensional growth process. XAS showed that Co(2+) transformed via a two-stage process during heating involving (i) a gradual transformation of octahedral coordination into tetrahedral coordination before the appearance of Bragg peaks corresponding to AFI, suggesting progressive incorporation of Co(2+) into the poorly ordered Al-O-P network up to ca. 150 degrees C, and (ii) a rapid transformation of remaining octahedral Co(2+) at the onset of crystallization. Co(2+) was observed to retard crystallization of AFI but provided valuable information regarding the synthesis process by acting as an internal probe. A three-stage, one-dimensional crystallization mechanism is proposed: (i) an initial reaction between aluminum and phosphate units forming a primary amorphous phase, (ii) progressive condensation of linear Al-O-P chains forming a poorly ordered structure separated by template molecules up to ca. 155 degrees C, and (iii) rapid internal reorganization of the aluminophosphate network leading to crystallization of the AFI crystal structure.     

On the Synthesis,Characterization and Reactivity of N‐Heteroaryl–Boryl Radicals,a New Radical Class Based on Five‐Membered Ring Ligands

The synthesis and physical characterization of a new class of N‐heterocycle–boryl radicals is presented, based on five membered ring ligands with a N(sp²) complexation site. These pyrazole–boranes and pyrazaboles exhibit a low bond dissociation energy (BDE; B?H) and accordingly excellent hydrogen transfer properties. Most importantly, a high modulation of the BDE(B?H) by the fine tuning of the N‐heterocyclic ligand was obtained in this series and could be correlated with the spin density on the boron atom of the corresponding radical. The reactivity of the latter for small molecule chemistry has been studied through the determination of several reaction rate constants corresponding to addition to alkenes and alkynes, addition to O₂, oxidation by iodonium salts and halogen abstraction from alkyl halides. Two selected applications of N‐heterocycle–boryl radicals are also proposed herein, for radical polymerization and for radical dehalogenation reactions.