Investigation of 7-((dioctylamino)methyl)quinoline-8-ol for uptake and removal of uranyl ions

A new 8-hydroxyquinoline derivative extractant was synthesized via the Mannich reaction from a secondary amine. Various analytical techniques (¹H, ¹³C NMR, FTIR, mass spectroscopy) were used to characterize our product. The use of this new extractant for the uptake and removal of uranyl ions in aqueous solution was investigated. Conditions for an effective sorption were optimized with respect to different experimental parameters in batch process. The results showed that the extraction rate increases for solutions with a pH in the range [0.65–1.13]. The total sorption capacity was 105 (mg g^?1) under optimum experimental conditions. The extraction of UO₂ ²⁺ was found to be quantitative (100 %) at initial uranyl concentration less than or equal to 41.59 mg/L. Thermodynamic parameters showed the adsorption of an endothermic process and a spontaneous nature, respectively.     

Photoactivatable V-Shaped Bifunctional Quinone Methide Precursors as a New Class of Selective G-quadruplex Alkylating Agents

Combining the selectivity of G-quadruplex (G4) ligands with the spatial and temporal control of photochemistry is an emerging strategy to elucidate the biological relevance of these structures. In this work, we developed six novel V-shaped G4 ligands that can, upon irradiation, form stable covalent adducts with G4 structures via the reactive intermediate, quinone methide (QM). We thoroughly investigated the photochemical properties of the ligands and their ability to generate QMs. Subsequently, we analyzed their specificity for various topologies of G4 and discovered a preferential binding towards the human telomeric sequence. Finally, we tested the ligand ability to act as photochemical alkylating agents, identifying the covalent adducts with G4 structures. This work introduces a novel molecular tool in the chemical biology toolkit for G4s.     

Phase separation and flux quantization in the doped quantum dimer model on square and triangular lattices

The doped two-dimensional quantum dimer model is investigated by numerical techniques on the square and triangular lattices, with significantly different results. On the square lattice, at small enough doping, there is always a phase separation between an insulating valence-bond solid and a uniform superfluid phase, whereas on the triangular lattice, doping leads directly to a uniform superfluid in a large portion of the resonating-valence-bond (RVB) phase. Under an applied Aharonov-Bohm flux, the superfluid exhibits quantization in terms of half-flux quanta, consistent with Q=2e elementary charge quanta in transport properties.     

Direct Evidence for Intermolecular Oxidative Addition of σ(SiSi) Bonds to Gold

Oxidative addition plays a major role in transition‐metal catalysis, but this elementary step remains very elusive in gold chemistry. It is now revealed that in the presence of GaCl₃, phosphine gold chlorides promote the oxidative addition of disilanes at low temperature. The ensuing bis(silyl) gold(III) complexes were characterized by quantitative ³¹P and ²⁹Si NMR spectroscopy. Their structures (distorted Y shape) and the reaction profile of σ(Si? Si) bond activation were analyzed by DFT calculations. These results provide evidence for the intermolecular oxidative addition of σ(Si? Si) bonds to gold and open promising perspectives for the development of new gold‐catalyzed redox transformations.     

1,10‐Phenanthroline and Non‐Symmetrical 1,3,5‐Triazine Dipicolinamide‐Based Ligands For Group Actinide Extraction

The synthesis and evaluation of new extractants for spent nuclear fuel reprocessing are described. New bitopic ligands constituted of phenanthroline and 1,3,5‐triazine cores functionalized by picolinamide groups were designed. Synthetic routes were investigated and optimized to obtain twelve new polyaza‐heterocyclic ligands. In particular, an efficient and versatile methodology was developed to access non‐symmetric 2‐substituted‐4,6‐di(6‐picolin‐2‐yl)‐1,3,5‐triazines from the 1,3,5‐triazapentadiene precursor in the presence of anhydride reagents. Extraction studies showed the ability of both ligand series to extract and separate actinides selectively at different oxidation states (U^VI, Np^V,VI, Am^III, Cm^III, and Pu^IV) from an acidic solution (3 M HNO₃). Phenanthroline‐based ligands show the most promising efficiency for use in the group actinide extraction (GANEX) process due to a higher number of donor nitrogen atoms and a suitable pre‐organization of the dipicolinamide‐1,10‐phenanthroline architecture.     

Modulable and Highly Diastereoselective Carbometalations of Cyclopropenes

The copper‐catalyzed carbomagnesiation reaction of cyclopropenyl esters 1 leads to various substituted cyclopropanes species 3 in good yields with very high diastereoselectivities. The reaction proceeds through a syn‐chelated carbomagnesiation reaction and could be extended to various cyclopropenylmethyl ester derivatives 5 . The potential of this approach was illustrated by the preparation of two consecutive all‐carbon quaternary stereocenters. However, the carbometalation reaction needs to be performed at temperature ranging from ?35 to ?20 °C to avoid subsequent fragmentation reaction into stereodefined β,γ‐nonconjugated unsaturated esters 4 . Alternatively, the carbocupration reaction with organocopper species could also be performed to leads to configurationally stable cyclopropyl copper species 2[Cu] . Additionally, when the Lewis acid character of the copper center is decreased (i.e., RCuCNLi), the reaction proceed with an anti‐selectivity. The diastereodivergent behavior of these organometallic species is of synthetic interest, since both diastereomers syn‐ 3 and anti‐ 3 can be obtained, at will, from the same precursor cyclopropenyl esters 1 .     

Uncatalyzed Hydroamination of Electrophilic Organometallic Alkynes: Fundamental,Theoretical, and Applied Aspects

Simple reactions of the most used functional groups allowing two molecular fragments to link under mild, sustainable conditions are among the crucial tools of molecular chemistry with multiple applications in materials science, nanomedicine, and organic synthesis as already exemplified by peptide synthesis and “click” chemistry. We are concerned with redox organometallic compounds that can potentially be used as biosensors and redox catalysts and report an uncatalyzed reaction between primary and secondary amines with organometallic electrophilic alkynes that is free of side products and fully “green”. A strategy is first proposed to synthesize alkynyl organometallic precursors upon addition of electrophilic aromatic ligands of cationic complexes followed by endo hydride abstraction. Electrophilic alkynylated cyclopentadienyl or arene ligands of Fe, Ru, and Co complexes subsequently react with amines to yield trans‐enamines that are conjugated with the organometallic group. The difference in reactivities of the various complexes is rationalized from the two‐step reaction mechanism that was elucidated through DFT calculations. Applications are illustrated by the facile reaction of ethynylcobalticenium hexafluorophosphate with aminated silica nanoparticles. Spectroscopic, nonlinear‐optical and electrochemical data, as well as DFT and TDDFT calculations, indicate a strong push–pull conjugation in these cobalticenium– and Fe– and Ru–arene–enamine complexes due to planarity or near‐planarity between the organometallic and trans‐enamine groups involving fulvalene iminium and cyclohexadienylidene iminium mesomeric forms.     

Organ Repair,Hemostasis, and In Vivo Bonding of Medical Devices by Aqueous Solutions of Nanoparticles

Sutures are traumatic to soft connective tissues, such as liver or lungs. Polymer tissue adhesives require complex in vivo control of polymerization or cross‐linking reactions and currently suffer from being toxic, weak, or inefficient within the wet conditions of the body. Herein, we demonstrate using Stöber silica or iron oxide nanoparticles that nanobridging, that is, adhesion by aqueous nanoparticle solutions, can be used in vivo in rats to achieve rapid and strong closure and healing of deep wounds in skin and liver. Nanoparticles were also used to fix polymer membranes to tissues even in the presence of blood flow, such as occurring after liver resection, yielding permanent hemostasis within a minute. Furthermore, medical devices and tissue engineering constructs were fixed to organs such as a beating heart. The simplicity, rapidity, and robustness of nanobridging bode well for clinical applications, surgery, and regenerative medicine.     

Photocatalytic Water Oxidation by a Pyrochlore Oxide upon Irradiation with Visible Light: Rhodium Substitution Into Yttrium Titanate

A stable visible‐light‐driven photocatalyst (λ≥450 nm) for water oxidation is reported. Rhodium substitution into the pyrochlore Y₂Ti₂O₇ is demonstrated by monitoring Vegard′s law evolution of the unit‐cell parameters with changing rhodium content, to a maximum content of 3 % dopant. Substitution renders the solid solutions visible‐light active. The overall rate of oxygen evolution is comparable to WO₃ but with superior light‐harvesting and surface‐area‐normalized turnover rates, making Y₂Ti_1.94Rh_0.06O₇ an excellent candidate for use in a Z‐scheme water‐splitting system.     

Polyesters by a Radical Pathway: Rationalization of the Cyclic Ketene Acetal Efficiency

Radical ring-opening polymerization (rROP) of cyclic ketene acetals (CKAs) combines the advantages of both ring-opening polymerization and radical polymerization thereby allowing the robust production of polyesters coupled with the mild polymerization conditions of a radical process. rROP was recently rejuvenated by the possibility to copolymerize CKAs with classic vinyl monomers leading to the insertion of cleavable functionality into a vinyl-based copolymer backbone and thus imparting (bio)degradability. Such materials are suitable for a large scope of applications, particularly within the biomedical field. The competition between the ring-opening and ring-retaining propagation routes is a major complication in the development of efficient CKA monomers, ultimately leading to the use of only four monomers that are known to completely ring-open under all experimental conditions. In this article we investigate the radical ring-opening polymerization of model CKA monomers and demonstrate by the combination of DFT calculations and kinetic modeling using PREDICI software that we are now able to predict in silico the ring-opening ability of CKA monomers.