New Insights into the Reactivity of Cisplatin with Free and Restrained Nucleophiles: Microsolvation Effects and Base Selectivity in Cisplatin–DNA Interactions

The reactivity of cisplatin towards different nucleophiles has been studied by using density functional theory (DFT). Water was considered first to analyze the factors that govern the transformation of cisplatin into more electrophilic aquated species by using an activation‐strain model. It was found that the selectivity and reactivity of cisplatin is a delicate trade‐off between strain and interaction energies and that the second chloride is a worse leaving group than the first. When similar studies were carried out with imidazole, guanine (G), and adenine (A), it was found that in general the second nucleophilic substitution reactions have lower activation barriers than the first ones. Finally, simulations of the structural restrictions imposed by the DNA scaffold in intra‐ and interstrand processes showed that the geometries of the reaction products are nonoptimal with respect to the unrestrained A and G nucleophiles, although the energetic cost is not considerable under physiological conditions, which thus permits nucleophilic substitution reactions that lead to highly distorted DNA.     

Highly Efficient Transition Metal Nanoparticle Catalysts in Aqueous Solutions

A ligand design is proposed for transition metal nanoparticle (TMNP) catalysts in aqueous solution. Thus, a tris(triazolyl)‐polyethylene glycol (tris‐trz‐PEG) amphiphilic ligand, 2 , is used for the synthesis of very small TMNPs with Fe, Co, Ni, Cu, Ru, Pd, Ag, Pt, and Au. These TMNP‐ 2 catalysts were evaluated and compared for the model 4‐nitrophenol reduction, and proved to be extremely efficient. High catalytic efficiencies involving the use of only a few ppm metal of PdNPs, RuNPs, and CuNPs were also exemplified in Suzuki–Miyaura, transfer hydrogenation, and click reactions, respectively.     

Heat-treated Saccharomyces cerevisiae for antimony speciation and antimony(III) preconcentration in water samples

An analytical method was developed for antimony speciation and antimony(III) preconcentration in water samples. The method is based on the selective retention of Sb(III) by modified Saccharomyces cerevisiae in the presence of Sb(V). Heat, caustic and solvent pretreatments of the biomass were investigated to improve the kinetics and thermodynamics of Sb(III) uptake process at room temperature. Heating for 30 min at 80 degrees C was defined as the optimal treatment. Antimony accumulation by the cells was independent of pH (5-10) and ionic strength (0.01-0.1 mol L(-1)). 140 mg of yeast and 2h of contact were necessary to ensure quantitative sequestration of Sb(III) up to 750 microg L(-1). In these conditions, Sb(V) was not retained. Sb(V) was quantified in sorption supernatant by inductively coupled plasma mass spectrometry (ICP-MS) or inductively coupled plasma optical emission spectrometry (ICP-OES). Sb(III) was determined after elution with 40 mmol L(-1) thioglycolic acid at pH 10. A preconcentration factor close to nine was achieved for Sb(III) when 100mL of sample was processed. After preconcentration, the detection limits for Sb(III) and Sb(V) were 2 and 5 ng L(-1), respectively, using ICP-MS, 7 and 0.9 microg L(-1) using ICP-OES. The proposed method was successfully applied to the determination of Sb(III) and Sb(V) in spiked river and mineral water samples. The relative standard deviations (n=3) were in the 2-5% range at the tenth microg L(-1) level and less than 10% at the lowest Sb(III) and Sb(V) tested concentration (0.1 microg L(-1)). Corrected recoveries were in all cases close to 100%.     

A new approach towards peptidosulfonamides: synthesis of potential inhibitors of bacterial peptidoglycan biosynthesis enzymes MurD and MurE

Peptidosulfonamides are an emerging group of peptidomimetics with a variety of applications in medicinal chemistry. We present a novel approach to the synthesis of peptidosulfonamides, and apply it to a series of new potential inhibitors of the bacterial peptidoglycan biosynthesis enzymes MurD and MurE. The synthesis was conducted via N-phthalimido β-aminoethanesulfonyl chlorides, which are new building blocks for the synthesis of peptidosulfonamides. In the most crucial step, sulfonic acids or their sodium salts were converted into the corresponding sulfonyl chlorides using an excess of either SOCl₂ or SOCl₂/DMF, and then coupled to the C-protected amino acid. None of the compounds significantly inhibited MurD, however, some inhibited MurE; one had an IC₅₀ below 200 μM, which constitutes a promising starting point for further development. Molecular modelling simulations were performed on two analogues to investigate the absence of inhibitory activity of the sulfonamide compounds on MurD.     

Comprehensive two-dimensional gas chromatography for enhanced analysis of naphthas: new column combination involving permethylated cyclodextrin in the second dimension

A new column association using comprehensive two-dimensional gas chromatography for the detailed molecular analysis of hydrocarbon mixtures is reported in this paper. In order to compare the impact of two different secondary columns, a novel column combination relying on a GC x 2GC system was used. This system is based on a non-polar first column (PONA) combined with both a permethylated beta-cyclodextrin (beta-Dex 120) stationary phase and a polysilphenylensiloxane (BPX 50) in the second dimension. Compared to BPX 50 stationary phase, the implementation of beta-cyclodextrin columns as the second dimension was found to improve the resolution between paraffins and naphthenes in the naphtha range but not in the middle distillate range. Attempts to improve the results and to understand the interaction mechanism remained unsuccessful. Therefore, the benefits of the beta-Dex 120-column are only demonstrated on heavy naphtha cut for the quantitation of hydrocarbons.     

Unraveling the crystallization mechanism of CoAPO-5 molecular sieves under hydrothermal conditions

The hydrothermal crystallization of CoAPO-5 molecular sieves has been studied using time-resolved in-situ SAXS/WAXS, UV-vis, Raman, and XAS. Data collected during heating to 180 degrees C allowed the observation of different steps occurring during the transformation of the amorphous gel into a crystalline material from a macroscopic and atomic perspective. Raman spectroscopy detected the initial formation of Al-O-P bonds, whereas SAXS showed that these gel particles had a broad size distribution ranging from ca. 7 to 20 nm before crystallization began. WAXS showed that this crystallization was sharp and occurred at around 160 degrees C. Analysis of the crystallization kinetics suggested a one-dimensional growth process. XAS showed that Co(2+) transformed via a two-stage process during heating involving (i) a gradual transformation of octahedral coordination into tetrahedral coordination before the appearance of Bragg peaks corresponding to AFI, suggesting progressive incorporation of Co(2+) into the poorly ordered Al-O-P network up to ca. 150 degrees C, and (ii) a rapid transformation of remaining octahedral Co(2+) at the onset of crystallization. Co(2+) was observed to retard crystallization of AFI but provided valuable information regarding the synthesis process by acting as an internal probe. A three-stage, one-dimensional crystallization mechanism is proposed: (i) an initial reaction between aluminum and phosphate units forming a primary amorphous phase, (ii) progressive condensation of linear Al-O-P chains forming a poorly ordered structure separated by template molecules up to ca. 155 degrees C, and (iii) rapid internal reorganization of the aluminophosphate network leading to crystallization of the AFI crystal structure.     

Six-dimensional quantum dynamics of (v=0,j=0)D2 and of (v=1,j=0)H2 scattering from Cu111

We report six-dimensional quantum dynamics calculations of the dissociative scattering of molecular hydrogen from the copper111 surface. Two potential energy surfaces are investigated and the results are compared with experiment. Our study completes the preliminary work of Somers et al. [Chem. Phys. Lett. 360, 390 (2002)] and focuses on the role of initial vibrational excitation and on isotopic effects. None of the two investigated potential energy surfaces is found satisfactory: the use of neither potential yields reaction and vibrational excitation probabilities and vibrational efficacies that are in close agreement with experiment. In addition to showing the shortcomings of existing potential energy surfaces we point out an inconsistency in the experimental fits for D2.     

"Click" synthesis and properties of carborane-appended large dendrimers

Large dendrimers, noted G(n)-3(n+2)cage, containing 3(n+2) o-carborane cluster cages MeC(2)B(10)H(10) at their peripheries (n = number of generation noted G(n)) have been synthesized by Huisgen-type azide alkyne Cu(I)-catalyzed dipolar "click" cycloaddition reactions (CuAAC) between an o-carborane monomeric cluster containing an ethynyl group and arene-centered azido-terminated dendrimers G(n)-3(n+2)N(3) of generations 0, 1, and 2. Attempts to synthesize higher-generation dendrimers of this family yielded insoluble materials. The carborane dendrimers G(0)-9cage, G(1)-27cage, and G(2)-81cage have been characterized by (1)H, (13)C, (11)B NMR, elemental analysis, matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectroscopy, and size exclusion chromatography (SEC) showing low polydispersities, dynamic light scattering (DLS) showing hydrodynamic diameters of 5.7 nm for the G(1)-27cage and the 12.9 nm for the G(2)-81cage. These dendrimers are extremely robust thermally, with 10% mass loss temperatures of 411 °C for the G(0)-9cage, 371 °C for the G(1)-27cage, and 392 °C for the G(2)-81cage. They all showed a strong absorption in the UV region peaking at 258 nm, whereas emission spectra of low intensities were observed between 280 and 480 nm.     

Walking metals in d8···d8 hetero-bimetallic complexes: an original dynamic phenomenon

In the course of our investigations on polymetallic complexes derived from 1,3-bis(thiophosphinoyl)indene (Ind(Ph(2)P=S)(2)), we observed original fluxional behavior and report herein a joint experimental/computational study of this dynamic process. Starting from the indenylidene chloropalladate species [Pd{Ind(Ph(2) P=S)(2)}Cl](-) (1), the new Pd(II)···Rh(I) hetero-bimetallic pincer complex [PdCl{Ind(Ph(2) P=S)(2)}Rh(nbd)] (2; nbd=2,5-norbornadiene) was prepared. X-ray crystallography and DFT calculations substantiate the presence of a d(8)···d(8) interaction. According to multinuclear variable-temperature NMR spectroscopic experiments, the pendant {Rh(nbd)} fragment of 2 readily shifts in solution at room temperature between the two edges of the SCS tridentate ligand. To assess the role of the pincer-based polymetallic structure on this fluxional behavior, the related monometallic Rh complex [Rh{IndH(Ph(2) P=S)(2)}(nbd)] (3) was prepared. No evidence for a metal shift was observed in that case, even at high temperature, thus indicating that inplane pincer coordination to the Pd center plays a crucial role. The previously described Pd(II)···Ir(I) bimetallic complex 4 exhibited fluxional behavior in solution, but with a significantly higher activation barrier than 2. This finding demonstrates the generality of this metal-shift process and the strong influence of the involved metal centers on the associated activation barrier. DFT calculations were performed to shed light onto the mechanism of such metal-shift processes and to identify the factors that influence the associated activation barriers. Significantly different pathways were found for bimetallic complexes 2 and 4 on one hand and the monometallic complex 3 on the other hand. The corresponding activation barriers predicted computationally are in very good agreement with the experimental observations.     

Bridging M?Cl Bonds with Ambiphilic Phosphine–Borane Ligands

Bridging or pendant? Palladium and rhodium complexes deriving from an ambiphilic phosphine–borane ligand are shown to adopt a bridging P→M? Cl→B coordination mode in the solid state. DFT calculations provide more insight into the Cl→B interaction and suggest the possible interconversion of the bridging and B‐pendant forms in solution.