Magnetic Multi-Walled Carbon Nanotubes Matrix Solid-Phase Dispersion with Dispersive Liquid–Liquid Microextraction for the Determination of Ultra Trace Bisphenol A in Water Samples

Magnetic nanoparticle-assisted solid-phase dispersion (MMSPD) combined with dispersive liquid–liquid microextraction (DLLME) prior to high performance liquid chromatography with fluorescence detector (HPLC–FLU) is presented for determination of ultra trace Bisphenol A (BPA) in water. Magnetic multi-walled carbon nanotubes (MMWCNTs) were synthesized for the adsorption of BPA in water. Ultra trace BPA in water was transferred into the elute solvent by the MMSPD and further concentrated into trace volume extraction solvent by the DLLME. The limit of detection and limit of quantitation were 0.003 and 0.01 µg L^?1, respectively. Good linearity of BPA was found, ranging from 0.01 to 10 µg L^?1, with good squared regression coefficient (R ²) of 0.9999. Additionally, relative recoveries were 83.1 and 95.9% for two environmental water samples spiked with 0.20 µg L^?1 BPA, respectively. All results showed that the MMWCNTs nanoparticle-assisted MMSPD–DLLME–HPLC–FLU method was simple and reliable for the determination of ultra trace BPA in environmental water.     

Phytochemical,cytotoxic and chemotaxonomic study on Ajuga forrestii Diels (Labiatae)

A phytochemical investigation of Ajuga forrestii Diels led to the isolation of 14 compounds, including eight neo-clerodane diterpenes (1–8), two phytoecdysteroids (9, 11), one stigmastane sterol (10) and three iridoid glycosides (12–14). The structures of these compounds were identified by spectroscopic methods and a comparison of their data with those reported in the literature. This is the first report of compounds 1–14 from A. forrestii. The cytotoxic activities of the aqueous extract of A. forrestii and several compounds have been studied and the chemotaxonomic significance of isolated compounds has also been summarised.     

表面暴露活性位点的MoS_2纳米催化剂催化硝基化合物的非均相氢转移反应（英文）

MoS_2具有独特的二维层状结构,被广泛用于加氢脱硫过程以及HER反应,而且可以通过减少MoS_2的颗粒尺寸以及层数来进一步改善其催化活性.通过剥离方法得到的MoS_2纳米片虽然表现出优良的加氢脱硫活性,但容易团聚使其循环使用性能很差.如果通过引入纳米碳将单层的MoS_2纳米片进行有效"隔离",则可明显降低团聚的可能性,从而改善其催化性能和稳定性.本文通过一步水热法制备出了碳嵌入的MoS_2纳米颗粒(MoS_2@C),将其应用于硝基苯类化合物的氢转移反应中表现出了非常好的催化性能.进一步通过粉末X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和在线质谱检测等手段研究了层间距增加的MoS_2催化剂在硝基苯类化合物的氢转移反应中催化性能提升的原因.XRD,SEM和TEM结果表明,通过引入碳材料可以明显增加MoS_2的层间距,同时减小其颗粒尺寸,而且使MoS_2表现出弯曲的(002)晶面.由于存在一定的曲率,这种(002)晶面也会表现出一定的催化能力.氮气物理吸附结果表明,这种MoS_2@C复合物具有较高的比表面积(89 m~2g~(-1))和明显的介孔结构(~20 nm),在催化反应中有利于底物扩散,进而改善催化性能.XPS结果显示,与体相的MoS_2相比,MoS_2@C表面暴露出更多的不饱和Mo原子(Mo/S=0.71(MoS_2@C)vs Mo/S=0.63(MoS_2)),形成了独特的S-Mo-O结构以及缺陷结构.在硝基苯类化合物的氢转移反应中,层间距增加的MoS_2@C由于暴露出更多的活性位和具有弯曲的(002)晶面,表现出了更高的催化活性–(TOF=3.66 s~(-1) vs 1.24 s~(-1)(MoS_2)).通过质谱对反应过程的追踪发现,在只有肼存在的条件下,MoS_2@C催化肼分解的主要气相产物是氨气.这说明MoS_2@C能够使肼发生N-N键的断裂.而当肼和硝基苯同时存在的条件下,质谱检测的气相产物主要是氮气,表明硝基苯的存在可以诱导肼逐步发生N-H键断裂,在催化剂表面形成活性的H物种,进而转移到硝基苯上使其还原得到苯胺.使用偶氮苯和氧化偶氮苯作为反应底物,发现MoS_2@C很难使其还原为苯胺,这说明在该催化体系中,硝基苯的还原过程主要是沿着直接路径(硝基苯-亚硝基苯-苯胺)进行的.     

Study on the Synthesis and Biodegradation of Aliphatic Polyester

With the increasing use of one-off plastic products, the environmental pollution resulted from the plastic waste has become more and more serious. So many scientists have focused their attention on developing biodegradable polymers to substitute the traditional unbiodegradable polymers in the manufacture of disposable products. Thus the plastic waste can be treated by landfill or composting technique. It has been found that aliphatic polyesters possess better biodegradability compared with oth…     

吡啶甲酸锂-铑(Ⅰ)配合物催化甲醇羰基化反应

本文采用吡啶甲酸或吡啶二甲酸锂盐为配体,与铑形成顺二羰基配合物,用于催化甲醇羰基化制乙酸。研究表明,与通常的铑配合物相比,该类双金属配合物无论在催化活性或乙酸生成的选择性方面均有明显的提高。     

Fabrication of liquid crystal Fe3O4 composites and their magnetorheological properties

Some supramolecular polyacrylate-based liquid crystal polymers (PLCPs) were prepared by polyacrylic acid, a liquid crystal monomer and 3,5-pyridinedicarboxylic acid. Series of magnetic liquid crystal particles (Fe₃O₄@PLCPs) with core-shell structure were prepared by modifying surface of magnetic nanoparticles Fe₃O₄ by the PLCPs. The Fe₃O₄@PLCPs showed a saturation magnetization strength above 51.17 emu/g, which is similar to pure magnetic Fe₃O₄, indicating good magnetism and magnetic field dependence. Series of magnetorheological fluids were fabricated by Fe₃O₄@PLCPs (using as dispersed phase) and silicone oil (using as carrier liquid). The effects of mesogen, magnetic particle, and the polymer matrix on magnetorheological performance and settling stability were investigated. The magnetorheological fluid based on 10% Fe₃O₄@PLCP-1 showed the best performance at an applied magnetic field of 100 mT in this study. Furthermore, the magnetorheological fluids showed excellent settling stability because the density of Fe₃O₄@PLCPs was lower than that of Fe₃O₄. The Fe₃O₄@PLCPs-based fluids presented certain application potential in the field of magnetic fluid due to the excellent magnetorheological effect and settling stability.     

Visible light induced decomposition of sulfonyl hydrazides using Pd/ZrO2 nanocomposite photocatalyst

A new approach to synthesis of thiosulfonates has been developed under mild conditions without any oxidants and promoting reagents through a Pd/ZrO₂ nanocomposite photocatalyst catalyzed decomposition of sulfonyl hydrazides. This protocol gave the products in moderate yields, comparable to the best results reported so far. Finally, a plausible reaction mechanism was proposed.     

Microstructure of a-SiOx:H

A set of a-SiO_x:H (0.52 <x< 1.58) films are fabricated by plasma-enhanced-chemical-vapor-deposition (PECVD) method at the substrate temperature of 250°C. The microstructure and local bonding configurations of the films are investigated in detail using micro-Raman scattering, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It is found that the films are structural inhomogeneous, with five phases of Si, Si₂O:H, SiO:H, Si₂O₃:H and SiO₂ that coexist. The phase of Si is composed of nonhydrogenated amorphous silicon (a-Si) clusters that are spatially isolated. The average size of the clusters decreases with the increasing oxygen concentration x in the films. The results indicate that the structure of the present films can be described by a multi-shell model, which suggests that a-Si cluster is surrounded in turn by the subshells of Si₂O:H, SiO:H, Si₂O₃:H, and SiO₂.     

3一致 C-超图的最小边数

混合超图是含有两类超边的超图,一类称为C-超边,一类称为D-超边,它们的区别主要体现在染色要求上．混合超图的染色,要求每一C-超边至少有两个点染相同的颜色,而每一D-超边至少有两个点染不同的颜色．所用的最大颜色数称为对应混合超图的上色数,所用的最小颜色数称为对应混合超图的下色数．上、下色数与边数有密切关系．作者在文献[2]中证明了具有最小上色数的3一致C-超图边数的一个下界为‘n(n-2)/3’,其中n为对应混合超图的顶点数．该文证明当n=2k 1时,该下界是可以达到的．     

4一致反超图的最小边数问题

混合超图是在超图的基础上添加一个反超边得到的图．超边和反超边的区别主要体现在着色要求上．在着色中,要求每一超边至少要有两个点着不同的颜色,而每一反超边至少有两个点着相同的颜色．最大最小颜色数分别称为混合超图的上色数和下色数。本文主要研究反超图,即只含反超边的超图。讨论了上色数为3的4一致超图的最小边数问题．给出了上色数为3的4一致反超图的最小边数的一个上界和一个下界．