A MALDI-MS sensing chip prepared by non-covalent assembly for quantitation of acid phosphatase

A novel sensing chip was designed for MALDI-MS quantitation of acid phosphatase(ACP).The ACP sensing chip was constructed through non-covalent interaction of streptavidin and biotin for the assembly of biotinylated peptide substrate on biotinylated polyethylene-glycol(PEG)modified indium-tin oxide(ITO)slide.In the presence of ACP,the peptide substrate was dephosphorylated under acidic condition to generate a new mass signal.The quantitative assay of ACP was achieved with the mass signal ratio of product to the sum of product and left peptide substrate.Under optimal detection conditions,the ratio was linearly correlated with the concentration of ACP in the range of 0.05–12 g/L with a detection limit(LOD)of 0.04 g/L.The designed ACP sensing chip has been used to analyze ACP in complex clinical samples,which exhibited high selectivity,good repeatability,and admirably anti-interference ability.This work further demonstrates the concept of MS sensing and the application of MALDI-MS in quantitative analysis,and provides a convenient method for the quantitation of proteases in clinical diagnosis.     

Steam-assisted crystallization of highly dispersed nanosized hierarchical zeolites from solid raw materials and their catalytic performance in lactide production

A solvent-free route based on solid raw materials affords higher product yield and lower waste production compared to the traditional hydrothermal synthesis. However, the as-made zeolites usually present blocky aggregation states, limiting their mass transfer and exposure of active sites in catalytic applications. Herein, highly dispersed nanosized hierarchical Beta zeolites with varied Si/Al ratios were prepared via steam-assisted crystallization from ball-milled solid raw materials. Thanks to the sufficient mixing of solid raw materials and favorable migration of solid mixture, nanosized Beta zeolites are obtained that are assembled from nanoparticles (∼15 nm) and possess abundant interconnected intraparticle mesopores. The strategy can also be extended to synthesize nanosized hierarchical ZSM-5 zeolites. The as-prepared Beta zeolite (Si/Al = 10) exhibits outstanding catalytic performance in conversion of lactic acid to lactide (as high as 77.5% in yield). This work provides avenues for simple and cost-efficient synthesis of highly dispersed nanosized hierarchical zeolites, promising their important catalytic applications.

A cost-effective synthesis strategy based on steam-assisted crystallization from ball-milled solid raw materials is developed to prepare a highly dispersed nanosized hierarchical Beta zeolite for conversion of lactic acid (LA) to lactide (LT).     

Anisotropic Superconducting Properties of Kagome Metal CsV_3Sb_5

We systematically measure the superconducting(SC) and mixed state properties of high-quality CsV_3 Sb_5 single crystals with T_c～3.5 K.We find that the upper critical field H_(c2)(T) exhibits a large anisotropic ratio of H_(c2)~(ab)/H_(c2)~c～9 at zero temperature and fitting its temperature dependence requires a minimum two-band effective model.Moreover,the ratio of the lower critical field,H_(c1)~(ab)/H_(c1)~c,is also found to be larger than 1,which indicates that the in-plane energy dispersion is strongly renormalized near Fermi energy.Both H_(c1)(T) and SC diamagnetic signal are found to change little initially below T_c～3.5 K and then to increase abruptly upon cooling to a characteristic temperature of ～2.8 K.Furthermore,we identify a two-fold anisotropy of in-plane angular-dependent magnetoresistance in the mixed state.Interestingly,we find that,below the same characteristic T～2.8 K,the orientation of this two-fold anisotropy displays a peculiar twist by an angle of 60° characteristic of the Kagome geometry.Our results suggest an intriguing superconducting state emerging in the complex environment of Kagome lattice,which,at least,is partially driven by electron-electron correlation.     

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide

Soluble sulfur (S₈) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS₂) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS₂) and S₈, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS₂ solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.     

Conserved Control Path in Multilayer Networks

The determination of directed control paths in complex networks is important because control paths indicate the structure of the propagation of control signals through edges. A challenging problem is to identify them in complex networked systems characterized by different types of interactions that form multilayer networks. In this study, we describe a graph pattern called the conserved control path, which allows us to model a common control structure among different types of relations. We present a practical conserved control path detection method (CoPath), which is based on a maximum-weighted matching, to determine the paths that play the most consistent roles in controlling signal transmission in multilayer networks. As a pragmatic application, we demonstrate that the control paths detected in a multilayered pan-cancer network are statistically more consistent. Additionally, they lead to the effective identification of drug targets, thereby demonstrating their power in predicting key pathways that influence multiple cancers.     

Quantum Circuit Optimization for Solving Discrete Logarithm of Binary Elliptic Curves Obeying the Nearest-Neighbor Constrained

In this paper, we consider the optimization of the quantum circuit for discrete logarithm of binary elliptic curves under a constrained connectivity, focusing on the resource expenditure and the optimal design for quantum operations such as the addition, binary shift, multiplication, squaring, inversion, and division included in the point addition on binary elliptic curves. Based on the space-efficient quantum Karatsuba multiplication, the number of CNOTs in the circuits of inversion and division has been reduced with the help of the Steiner tree problem reduction. The optimized size of the CNOTs is related to the minimum degree of the connected graph.     

20GHz注入锁模光纤激光器实验

稳定、波长可调谐的窄脉冲光源是未来光时分复用/波分复用光纤通信系统的重要组成部分。报道了一个20GHz的注入锁模光纤激光器的实验。利用一个10GHz的导体体激光器作为光源，最终得到了波长可调谐的重复频率为20GHz、脉冲宽度为12.4ps的光脉冲，波长的调谐范围为16nm。     

Temperature-calibrated fiber-optic refractometer based on acompact FBG-SMS structure

A novel all-fiber temperature-calibrated refractometer based on a compact fiber Bragg grating(FBG) single-multi-single(SMS)structure is proposed and experimentally demonstrated.The sensor head is composed of a FBG combined with a SMS structure,in which the middle multimode fiber(MMF)section is etched by a time-controlled hydrofluoric.The transmission dip of SMS is extremely sensitive to ambient refractive index(RI)variation,whereas the upstream FBG provides the necessary temperature information for RI calibration.All aforementioned functions are performed via a compact FBG-SMS structure not longer than 25 mm.The proposed sensing device provides a linear RI sensitivity over water or waterbased solutions(RI values near 1.33 at optical wavelengths for most biological and many environmental applications),and has temperature-calibration capability.Hence,the said refractometer is a good candidate for sensing in chemical and biological applications.     

High‐mobility solution‐processed zinc oxide thin films on silicon nitride

A high effective electron mobility of 33 cm² V^–1 s^–1 was achieved in solution‐processed undoped zinc oxide (ZnO) thin films. The introduction of silicon nitride (Si₃N₄) as growth substrate resulted in a mobility improvement by a factor of 2.5 with respect to the commonly used silicon oxide (SiO₂). The solution‐processed ZnO thin films grown on Si₃N₄, prepared by low‐pressure chemical vapor deposition, revealed bigger grain sizes, lower strain and better crystalline quality in comparison to the films grown on thermal SiO₂. These results show that the nucleation and growth mechanisms of solution‐processed films are substrate dependent and affect the final film structure accordingly. The substantial difference in electron mobilities suggests that, in addition to the grain morphology and crystalline structure effects, defect chemistry is a contributing factor that also depends on the particular substrate. In this respect, interface trap densities measured in high‐κ HfO₂/ZnO MOSCAPs were about ten times lower in those fabricated on Si₃N₄ substrates. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)