Crosslinking of ethylene-propylene (-diene) terpolymer elastomer initiated by an excimer laser

Excimer laser-induced crosslinking of ethylene-propylene-diene elastomer using a trace amount of photoinitiator, 1-hydroxy cyclohexyl phenyl ketone, was evaluated. Gel content measurements on irradiated samples showed that crosslinking was a natural consequence in all, which had undergone exposure to laser radiation. Degree of crosslinking was found to be linear with the laser exposure energy and was found to reach a saturation value of approximately 80% at about 100 J. However, for thicker samples the dependence of gel content i.e. crosslinking was found to be exponential over the range of laser exposure energy in excess of 200 J. As is expected, the tensile strength increased significantly with the increase of crosslinking. The band at 808 cm⁻¹ in the infrared spectra was attributed to the 5-ethylidene-2-norbornene (ENB) content in the polymer. The ENB has a double bond which is considered to be consumed with a high radiochemical yield and thereby contributes to the increase in rate of the formation of intermolecular bridge density.     

Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).     

Total synthesis of (+/-)-jamtine using a thionium/N-acyliminium ion cascade

[reaction: see text] The first total synthesis of (+/-)-jamtine (4), a tetrahydroisoquinoline alkaloid reputed for its therapeutic properties, is described. The key step involves a tandem thionium/N-acyliminium ion cyclization from enamido sulfoxide 13. The cascade process takes place with high diastereoselectivity and in excellent yield.     

First seco-C oleananes from nature

[structure: see text] The triterpenes 8,14-seco-oleana-8(26),13-dien-3beta-ol (1) and its acetyl derivative 2 were isolated from Stevia viscida and Stevia eupatoria, respectively. Their structures were elucidated by 2D NMR, including carbon-carbon connectivity experiments, and confirmed by X-ray diffraction analysis of ketone 3. The absolute configuration was determined by NMR analysis of the Mosher esters of 1. The biogenetic implications of the new substances are discussed.     

Synthesis, structure, spectroscopic properties, and electrochemistry of (1,8,15,22-tetrasubstituted phthalocyaninato)lead complexes

Three (1,8,15,22-tetrasubstituted phthalocyaninato)lead complexes Pb[Pc(alpha-OR)(4)] [H(2)Pc(alpha-OC(5)H(11))(4) = 1,8,15,22-tetrakis(3-pentyloxy)phthalocyanine; H(2)Pc(alpha-OC(7)H(15))(4) = 1,8,15,22-tetrakis(2,4-dimethyl-3-pentyloxy)phthalocyanine; H(2)Pc(alpha-OC(10)H(7))(4) = 1,8,15,22-tetrakis(2-naphthyloxy)phthalocyanine] (1-3) have been prepared as racemic mixtures by treating the corresponding metal-free phthalocyanines H(2)Pc(alpha-OR)(4) (4-6) with Pb(OAc)(2).3H(2)O in refluxing n-pentanol. The molecular structure of Pb[Pc(alpha-OC(5)H(11))(4)] (1) in the solid state has been determined by single-crystal X-ray diffraction analysis. This compound, having a nonplanar structure, crystallizes in the monoclinic system with a P2(1)/c space group. Each unit cell contains two pairs of enantiomeric molecules, which are linked by weak coordination of the Pb atom of one molecule with an aza nitrogen atom and its neighboring oxygen atom from the alkoxy substituent of another molecule, forming a pseudo-double-decker supramolecular structure in the crystals with a short ring-to-ring separation, 2.726 A, and thus a strong ring-ring pi-pi interaction. The decreased molecular symmetry for these complexes has also been revealed by the NMR spectra of 1 and 2. The methyl protons of the 3-pentyloxy and 2,4-dimethyl-3-pentyloxy side chains of 1 and 2, respectively, are chemically inequivalent. In addition to the elemental analysis and various spectroscopic characterizations, these compounds have also been electrochemically studied. Two one-electron oxidations and up to five one-electron reductions have been revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Small-angle neutron scattering of ionic perfluoropolyether micellar solutions: role of counterions and temperature

This paper reports a small-angle neutron scattering (SANS) characterization of perfluoropolyether (PFPE) aqueous micellar solutions with lithium, sodium, cesium and diethanol ammonium salts obtained from a chlorine terminated carboxylic acid and with two perfluoroisopropoxy units in the tail (n(2)). The counterion and temperature effects on the micelle formation and micellar growth extend our previous work on ammonium and potassium salts n(2) micellar solutions. Lithium, sodium, cesium and diethanol ammonium salts are studied at 0.1 and 0.2 M surfactant concentration in the temperature interval 28-67 degrees C. SANS spectra have been analyzed by a two-shell model for the micellar form factor and a screened Coulombic plus steric repulsion potential for the structure factor in the frame of the mean spherical approximation of a multicomponent system reduced to a generalized one component macroions system (GOCM). At 28 degrees C, for all the salts, the micelles are ellipsoidal with an axial ratio that increases from 1.6 to 4.2 as the counterion volume increases. The micellar core short axis is 13 A and the shell thickness 4.0 A for the alkali micelles, and 14 and 5.1 A for the diethanol ammonium micelles. Therefore, the core short axis mainly depends on the surfactant tail length and the shell thickness on the carboxylate polar head. The bulky diethanol ammonium counterion solely influences the shell thickness. Micellar charge and average aggregation number depend on concentration, temperature and counterion. At 28 degrees C, the fractional ionization decreases vs the counterion volume (or molecular weight) increase at constant concentration for both C = 0.1 M and C = 0.2 M. The increase of the counterion volume leads also to more ellipsoidal shapes. At C = 0.2 M, at 67 degrees C, for sodium and cesium micelles the axial ratio changes significantly, leading to spherical micelles with a core radius of 15 A, lower average aggregation number, and larger fractional ionization.     

Determination of lead in seawater by inductively coupled plasma optical emission spectrometry after separation and pre-concentration with cocrystallized naphthalene alizarin

An analytical method for separation and pre-concentration of lead in seawater for determination by inductively coupled plasma optical emission spectrometry has been investigated. Lead was retained in the solid phase (0.5 g) composed of co-precipitated naphthalene and alizarin red. The solid phase quantitatively sorbs Pb(II) at pH 8–9, and the metal was eluted using 5.0 ml of 2 mol l⁻¹ nitric acid. The effect of NaCl, KCl, BaCl₂, CaCl₂, Na₂SO₄, MgCl₂ and Na₃PO₄ on the sorption of Pb(II) in the solid phase was studied. A set of solutions containing varying amounts of electrolytes (0.5; 1.0; 3.0 and 5.0% m/v) with Pb (50 μg) was prepared and the recommended procedure applied. The Na₃PO₄ was found to interfere; the other electrolytes did not interfere up to 5% m/v. A pre-concentration factor of 40 was obtained in this analytical procedure. The limit of detection and limit of quantification for Pb(II) were 53 and 176 μg l⁻¹, respectively. Lead was determined in seawater samples collected in Salvador city, Bahia, Brazil. The precision, expressed as R.S.D., was 1.8–4.6%, and the recovery of lead added to seawater samples was 95–97%.     

Application of barycentric method for determination of free energy of liquid monodisperse system accomplishing diffusion

The barycentric method has been applied to determining the thermodynamic potential (the free energy) of a liquid rarefied monodisperse colloid system in which free unstationary diffusion under constant external conditions has been accomplished. Free energy at an arbitrary moment of time has been obtained as a function of horizontal mass center shift toward the cuvette cavity geometrical center of the liquid disperse system investigated. A very good coincidence between the numerical results from the proposed barycentric method and another classical thermodynamic method has been observed.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.