钴掺杂MoSe2共生长中氢气的作用分析及磁电特性研究

采用原位共生长化学气相沉积法,以Co3O4、MoO3、Se粉末为前驱物,710℃下在SiO2衬底上生长掺钴MoSe2纳米薄片,分析讨论氢气含量对其生长及调节机理的影响.表面形貌分析表明,氢气的引入促进了成核所需的氧硒金属化合物以及横向生长中需要的CoMoSe化合物分子的生成;AFM(Atomic Force Microscope)结果表明氢气有利于生长单层二维超薄掺钴MoSe2.随着Co3O4前驱物用量的增加,样品的拉曼和PL(Photoluminescence)谱图分别表现出红移和蓝移现象,带隙实现从1.52—1.57 eV的调制.XPS(X-ray photoelectron spectroscopy)结果分析得到Co的元素组分比为4.4%.通过SQUID-VSM(Superconducting QUantum Interference Device)和器件电学测试分析了样品的磁电特性,结果表明Co掺入后MoSe2由抗磁性变为软磁性;背栅FETs器件的阈值电压比纯MoSe2向正向偏移5 V且关态电流更低;为超薄二维材料磁电特性研究及应用拓展提供了基础探索.     

Multicaloric and coupled-caloric effects

The multicaloric effect refers to the thermal response of a solid material driven by simultaneous or sequential application of more than one type of external field.For practical applications,the multicaloric effect is a potentially interesting strategy to improve the efficiency of refrigeration devices.Here,the state of the art in multi-field driven multicaloric effect is reviewed.The phenomenology and fundamental thermodynamics of the multicaloric effect are well established.A number of theoretical and experimental research approaches are covered.At present,the theoretical understanding of the multicaloric effect is thorough.However,due to the limitation of the current experimental technology,the experimental approach is still in progress.All these researches indicated that the thermal response and effective reversibility of multiferroic materials can be improved through multicaloric cycles to overcome the inherent limitations of the physical mechanisms behind single-field-induced caloric effects.Finally,the viewpoint of further developments is presented.     

Evolution of Classical and Quantum States in the Groupoid Picture of Quantum Mechanics

The evolution of states of the composition of classical and quantum systems in the groupoid formalism for physical theories introduced recently is discussed. It is shown that the notion of a classical system, in the sense of Birkhoff and von Neumann, is equivalent, in the case of systems with a countable number of outputs, to a totally disconnected groupoid with Abelian von Neumann algebra. The impossibility of evolving a separable state of a composite system made up of a classical and a quantum one into an entangled state by means of a unitary evolution is proven in accordance with Raggio’s theorem, which is extended to include a new family of separable states corresponding to the composition of a system with a totally disconnected space of outcomes and a quantum one.     

Nucleation of Pd dimers at defect sites of the MgO(100) surface

Point defects on oxide surfaces are presumed to be preferential nucleation sites for supported metal clusters. Under typical growth conditions, dimers constitute the first step in island nucleation. First-principles calculations on the formation of Pd dimers on regular and defect sites of the MgO(100) surface show that nucleation occurs with large dimer binding energies at divacancies and charged oxygen vacancies (F+ centers), while it is less favorable on steps and neutral F centers. The extensive database of defect trapping/attachment properties gives a firm basis to rationalize recent atomic-force microscopy findings and provides guidelines valid, in general, for ionic substrates.     

Modeling impurity-assisted chain creation in noble-metal break junctions

In this work we present the generalization of the model for chain formation in break junctions, introduced by Thiess et al (2008 Nano Lett. 8 2144), to zigzag transition-metal chains with s and p impurities. We apply this extended model to study the producibility trends for noble-metal chains with impurities, often present in break junction experiments, namely, Cu, Ag and Au chains with H, C, O and N adatoms. Providing the material-specific parameters for our model from systematic full-potential linearized augmented plane-wave first-principles calculations, we find that the presence of such impurities crucially affects the binding properties of the noble-metal chains. We reveal that both the impurity-induced bond strengthening and the formation of zigzag bonds can lead to a significantly enhanced probability for chain formation in break junctions.     

Digital holographic microscopy characterization of superdirective beam by metamaterial

Digital holographic microscopy (DHM) has been successfully applied for the first time to characterize the radiative out-of-plane emission properties of a superdirective device. Complementarily to near-field microscopy, DHM allows us to reconstruct the beam in the far-field region. The angular dispersion of the light beam radiated from a grating composed of air and anti-air metamaterial has been determined, and the proposed technique has highlighted a collimation degree higher than 0.04°, as already evaluated in a previous work. Further considerations on the retrieved phase map of the beam in the acquisition plane are presented.     

Dye solar cells efficiency maps: a parametric study

In this work we present a numerical simulation of a dye solar cell efficiency using a drift-diffusion model for the complete cell. The physical parameters such as the active layer thickness, the electron mobility and the dye spectrum are varied systematically in a range of values individuated experimentally, in order to obtain efficiency maps that reveal interesting features in this kind of devices.     

Piezoelectric properties of new ternary Bi1/2(Na, Li)1/2TiO3–(Bi1/2K1/2)TiO3–Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

0.852[Bi_1/2(Na_1?x Li _x )_1/2]TiO₃?C0.110(Bi_1/2K_1/2)TiO₃?C0.038Ba_0.85Ca_0.15Ti_0.90Zr_0.10O₃ (BNLT?CBKT?CBCTZ-x) new ternary piezoelectric ceramics were fabricated by the conventional solid-state method, and their piezoelectric properties as a function of the Li content were mainly investigated. A?stable solid solution with a single perovskite structure has been formed, and the depolarization temperature (T _d) of these ceramics was identified by using the temperature dependence of the dielectric loss. The T _d value of these ceramics gradually decreases, while the T _m value increases with increasing the Li content. The dielectric constant increases and the dielectric loss decreases with increasing the Li content, and an enhanced piezoelectric behavior of d ₃₃??223 pC/N and k _p??35.2?% has been demonstrated in these ceramics with x=0.06.     

The Chaotic Mixmaster and the Suppression of Chaos in Scalar–Tensor Cosmologies

We show that there is a threshold in energy for the onset of chaos in cosmology for the Universe described as a dynamical system derived from the Einstein equations of General Relativity (GR). In the case of the mixmaster model (homogeneous and anisotropic cosmology with a Bianchi IX metric), the chaos occurs precisely at the prescribed necessary value H _vac=0 of the GR for the energy of the Universe while the system is found to be regular for H<0 and chaotic for H>0 with respect to its pure vacuum part. In the case of generalized scalar tensor theories within the Bianchi IX model, we show using the ADM formalism and a conformal transformation that the energy of the dynamical system as compared to vacuum lies below the zero energy threshold. The system is thus not exhibiting chaos and the conclusion still holds in the presence of ordinary matter as well. The suppression of chaos occurs in a similar way for stiff matter alone.     

On the role of visible radiation in ozone profile retrieval from nadir UV/VIS satellite measurements: An experiment with neural network algorithms inverting SCIAMACHY data

Theoretical evidence has been given on the role of visible (VIS) radiation in enhancing the accuracy of ozone retrievals from satellite data, especially in the troposphere. However, at present, VIS is not being systematically used together with ultraviolet (UV) measurements, even when possible with one single instrument, e.g., the SCanning Imaging Absorption spectroMeter for Atmospheric CartograpHY (SCIAMACHY). Reasons mainly reside in the defective performance of optimal estimation and regularization algorithms caused by inaccurate modeling of VIS interaction with aerosols or clouds, as well as in inconsistent intercalibration between UV and VIS measurements. Here we intend to discuss the role of VIS radiation when it feeds a retrieval algorithm based on Neural Networks (NNs) that does not need a forward radiative transfer model and is robust with respect to calibration errors. The NN we designed was trained with a set of ozonesondes (OSs) data and tested over an independent set of OS measurements. We compared the ozone concentration profiles retrieved from UV-only with those retrieved from UV plus VIS nadir data taken by SCIAMACHY. We found that VIS radiation was able to yield more than 10% increase of accuracy and to substantially reduce biases of retrieved profiles at tropospheric levels.