双脉冲高功率脉冲调制器的设计

采用螺旋线和折叠线技术相结合的方法,设计了一种基于水介质高功率脉冲调制器。该调制器采用了两个开关,通过控制两个开关的导通时刻,可以在两个负载上得到脉冲长度相等的两个脉冲。对该种折叠型传输线的波过程进行了详细分析,给出了过渡段部分阻抗等参数对负载电压的影响;用Pspice电路软件对脉冲形成线的充电电压和二极管电压、电流进行了模拟;最后利用高压同轴电缆,对该种类型调制器进行了低压情况下的验证实验,实验结果与理论分析、模拟研究一致。此种类型的调制器具有结构紧凑、可同时输出两个脉冲的优点。     

Coupled caloric effects in multiferroics

We propose a conception – coupled caloric effect   where the enhanced caloric effects originate from the coupling among magnetic, ferroelectric, and structural degrees of freedom. Specifically, as the magneto-electric case, the magnitude of the coupled caloric effect was evaluated for a ferromagnetic–ferroelectric system using a phenomenological calculation based on Landau phase transition theory. The isothermal entropy change is greatly enhanced by increasing the magneto-electric coupling strength. This work indicates that the caloric effect in a ferromagnetic–ferroelectric coupled system consists of pure magnetic entropy change (Δ_SM$\mathrm{\Delta }{S}_M$), pure ferroelectric one (Δ_SE$\mathrm{\Delta }{S}_E$), and coupled one (Δ_SME$\mathrm{\Delta }{S}_{\mathit{ME}}$) that plays a significant part. The counterpart of the last one in magneto-structural coupled system was usually neglected. Our study provides a route to energy-efficient refrigeration via realization of coupling among various ferroic orders.     

Theoretical and experimental investigation of thermal effects in a high power Yb-doped double-clad fiber laser

In this paper, based on the thermal conduction equations and the steady-state rate equations, a theoretical and numerical analysis of thermal effects is investigated for a single end pumped Yb-doped double-clad fiber laser (YDDC). The distributions of signal power and temperature for different pump powers and fiber parameters are compared. According to the results, the parameters of the optical-cavity have been optimized and an effective method has been adopted to reduce the thermal effects in an experimental investigation. As a result, an output power of 621 W has been obtained with a slope efficiency of 78%.     

Optimization of direct modulation rate for circular microlasers by adjusting mode Q factor

Semiconductor microcircular lasers have been investigated as potential light sources for photonic integrated circuits and optical interconnections for more than two decades. However, the direct modulation bandwidths of the circular microlasers remain a challenge, especially when being compared with other microlasers, such as photonic crystal lasers. In this paper, microcircular lasers connected to an output waveguide are investigated for high‐speed direct modulation with optimized mode Q factors. Small signal modulation with a resonance frequency of f_R = 12.5 GHz is realized for a AlGaInAs/InP circular microlaser with a radius of 10 µm at 290 K. Furthermore, clear eye diagrams are observed at 12.5 Gbit/s for a 15‐µm radius circular microlaser with f_R = 6.9 GHz.     

基于PC机的一种多功能声显微镜及可视化技术的研究

近来研制成功了一种基于ＰＣ机、我们称为“ＴＨＳＡＭＭ”型的多功能声显微镜。在ＰＣ机内插入采样率１ＧＳＰＳ的超高速Ａ／Ｄ卡和信号产生和接收卡,利用软件完成信号检测、处理、显示功能。仪器工作频率为１－１００ＭＨｚ;在检测样品时,同时多层显示Ａ、Ｂ、Ｃ扫描结果。根据声学理论、Ｍａｒｃｈｉｎｇ Ｃｕｂｅ等值面抽取方法和ＯｐｅｎＧＬ技术完成了三维数据的可视化处理,显示样品的内部三维结构。该系统已成功应用于多     

High-conversion-efficiency, diode-pumped continuous-wave Raman laser

We demonstrate a diode-pumped cw Raman laser in H(2) with photon-conversion efficiency of (66+/-8)%. Pumped by an injection-locked diode laser at 792 nm, the Stokes laser produces a peak output power of ~16mW at 1180 nm. Accompanying the high Stokes power are deviations from the existing theory, which are believed to be caused by the thermal-lensing effect of the Raman gas.     

Diode-pumped Q-switched Nd:GdVO4/KTP green laser formed with a flat–flat resonator

A diode-pumped acousto-optically Q-switched intracavity frequency-doubled Nd:GdVO₄/KTP green laser formed with a flat–flat resonator was demonstrated. 3.05 W of average green output power at pulse repetition frequency (PRF) of 40 kHz was obtained with an optical conversion efficiency of 18.4%, the effective intracavity frequency-doubling efficiency was 57%. At the incident pump power of 15 W, the shortest laser pulse occurred at PRF of 25 kHz with FWHM width of 14 ns, yielding the highest peak power of 7.44 kW; while the largest pulse energy of 0.14 mJ was achieved at PRF of 15 kHz.     

磁场下合成Fe3O4粉体的隧道磁阻

通过在半金属Fe₃O₄合成过程中外加磁场的方法，改变样品粒子的表面结晶状态和晶格缺陷，研究了由此引起的Fe₃O₄输运性质的变化.合成的Fe₃O₄粉体的主要导电机理均为自旋极化隧穿和高阶跃迁电导，电阻随温度升高成指数降低，电阻与电压显示了非线形相关性，磁阻与磁场的关系为蝴蝶形，是典型的隧道磁阻特征.与没有外加磁场时合成的样品比较，外加磁场合成的样品显示了更低的电阻和更高的磁阻.     

平行共轴线圈的磁场特征研究与实验设计

通过计算机及相关的传感器和数据采集接口辅助,研究了平行共轴双线圈间距分别为0.5R,R,1.5R时,轴线方向磁场强度的分布规律及特征.从平行共轴双线圈间距为R的亥姆霍兹线圈所形成的均匀磁场出发,结合理论推导,自己设计并组装了三线圈实验装置,实现了平行共轴三线圈均匀磁场区域扩大、强度增强的实验设计,在一定程度上弥补了传统亥姆霍兹线圈磁场测量的不足并有助于对其深入的理解和研究.