Total synthesis of a cuticular hydrocarbon from the cane beetle Antitrogus parvulus: confirmation of the relative stereochemistry

The stereoselective reaction of an allyl bromide with an aldehyde mediated by a low valency bismuth species was the key reaction in stereoselective syntheses of (4S,6R,8R,10S,16S)- and (4S,6R,8R,10S,16R)-4,6,8,10,16-pentamethyldocosanes. (13)C NMR data for these compounds confirmed that the cuticular hydrocarbon isolated from the cane beetle Antitrogus parvulus was the (4S,6R,8R,10S,16S)-stereoisomer.     

Photoconducting nanocrystalline lead sulphide thin films obtained by chemical bath deposition

A chemical bath deposition method of preparing photoconducting nanocrystalline lead sulphide (PbS) thin films at room temperature (RT) is described. The aqueous bath of lead acetate, thiourea, and ammonium hydroxide produce films of about 100?nm thicknesses in 45?minutes. X-ray diffraction (XRD) studies show that these films are nanocrystalline cubic PbS with 10?nm crystallite size. Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM) revealed that the films consist of spherical grains of sizes 100 to 200?nm. The transmission spectra of the films show onset of absorption edge around 850?nm and the bandgap is around 1.65?eV. The films are p-type with dark conductivity of 2.5×10^?3?S/cm and mobility of 0.07?cm²/V?s. The photosensitivity is 6–7 for an illumination of 80?mW/cm² from a halogen lamp (50?W, 12?V). Transient photoconductivity measurements reveal short and long life times of minority carriers. Thermoelectric and photothermoelectric studies show that photoconductivity in these films is mainly due to photogenerated majority carriers.     

Observation of the Low‐Frequency Spectrum of the Water Dimer as a Sensitive Test of the Water Dimer Potential and Dipole Moment Surfaces

Using the helium nanodroplet isolation setup at the ultrabright free‐electron laser source FELIX in Nijmegen (BoHeNDI@FELIX), the intermolecular modes of water dimer in the frequency region from 70 to 550 cm^?1 were recorded. Observed bands were assigned to donor torsion, acceptor wag, acceptor twist, intermolecular stretch, donor torsion overtone, and in‐plane and out‐of‐plane librational modes. This experimental data set provides a sensitive test for state‐of‐the‐art water potentials and dipole moment surfaces. Theoretical calculations of the IR spectrum are presented using high‐level quantum and approximate quasiclassical molecular dynamics approaches. These calculations use the full‐dimensional ab initio WHHB potential and dipole moment surfaces. Based on the experimental data, a considerable increase of the acceptor switch and a bifurcation tunneling splitting in the librational mode is deduced, which is a consequence of the effective decrease in the tunneling barrier.     

Convergent synthesis of Carpatamide-A: Cytotoxic arylamine derivative from marine derived Streptomyces sp.

First total synthesis of carpatamide-A 7a, cytotoxic arylamine derivative isolated from marine derived Streptomyces sp., was achieved in twelve steps with overall yield of 24% with seven longest linear steps. In the penultimate step, dienoic acid 13 and an amino-phenylpropionic acid methyl ester core 21 were coupled to synthesize methylated derivativative of carpatamide-A 22 followed by demethylation of the intermediate with BBr₃ to accomplish carpatamide-A 7a. Both precursors 13 and 21 were synthesized from readily available starting materials i.e. isovaleraldehyde 8 and 2, 4-dihydroxy benzaldehyde 14.     

Immunoassay for the detection of lead ions in environmental water samples

A rapid, simple, and reliable competitive immunoassay was developed for measurement of lead ions Pb(II) in environmental samples. Avian antibodies were produced against Pb(II). Since lead ions are too small to elicit an immune response, the metal was coupled to protein carrier Bovine serum albumin (BSA) using a bifunctional chelator 1-(4-isothiocyanobenzyl) ethylenediamine N,N,N′,N′-tetra acetic acid (ITCBE). Poultry birds (layers) were immunised with this Pb(II)–ITCBE–BSA immunoconjugate and the avian antibodies (IgY) isolated from egg yolk recognised Pb(II)-ITCBE complexes as capture reagent and a Pb(II)–ITCBE conjugate of Alkaline phosphatase as an enzyme label. Antibody reaction was optimised for different concentrations of antigen and antibody dilutions. Cross reactivity with other metals were below 1% in competitive ELISA. The IC₅₀ value of this avian antibody was 0.19?µg?mL^?1. The detection range and the detection limit were 0.02–1000?µg?mL^?1and 0.2?µg?mL^?1, respectively.     

Catalytic reduction of 4-nitrophenol using synthesized and characterized CoS@MorphcdtH/CoS@4-MPipzcdtH nanoparticles

CoS@MorphcdtH NPs and CoS@4-MPipzcdtH NPs were synthesized by precipitation method involving three mechanisms: inclusion, occlusion, and adsorption. The synthesized NPs were characterized with the help of UV-Vis spectroscopy, FESEM-EDAX, powder x-ray diffraction, TEM, ESIMS, TG/DSC analysis. The morphology of the CoS@MorphcdtH NPs and CoS@4-MPipzcdtH NPs were hexagonal and rectangular, and the particles were in the range 7–12 nm. UV–visible spectral measurements showed surface plasmon resonance at 320 nm–340 nm with band gap of 3.65 eV–3.86 eV. The catalytically active CoSNPs called were investigated for the reduction of 4-nitrophenol (4-NP) via hydrogenation using sodium borohydride (NaBH₄) as a reducing agent. Both the CoS NPs successfully reduced 4-NP to 4- aminophenol (4-AP) in a short time, catalytic performances are almost unchanged for the first five cycles. Herein, we report the preparation and characterizations of efficient active CoS NPs consisting carbodithioic acid framework as a support/capping material, along with catalytic property.     

Geometric mesh FDM for self-adjoint singular perturbation boundary value problems

A numerical method based on finite difference method with variable mesh is given for second order singularly perturbed self-adjoint two point boundary value problems. The original problem is reduced to its normal form and the reduced problem is solved by FDM taking variable mesh(geometric mesh). The maximum absolute errors max_i|y(x_i)-y_i|, for different values of parameter , number of points N, and the mesh ratio r, for three examples have been given in tables to support the efficiency of the method.