Preparation, structure, and optical properties of nanoporous gold thin films

Thin nanoporous gold (np-Au) films, ranging in thickness from approximately 40 to 1600 nm, have been prepared by selective chemical etching of Ag from Ag/Au alloy films supported on planar substrates. A combination of scanning electron microscopy (SEM) imaging, synchrotron grazing incidence small angle X-ray scattering, and N2 adsorption surface area measurements shows the films to exhibit a porous structure with intertwined gold fibrils exhibiting a spectrum of feature sizes and spacings ranging from several to hundreds of nanometers. Spectroscopic ellipsometry measurements (300-800 nm) reveal the onset of surface plasmon types of features with increase of film thicknesses into the approximately 200 nm film thickness range. Raman scattering measurements for films functionalized with a self-assembled monolayer formed from 4-fluorobenzenethiol show significant enhancements which vary sharply with film thickness and etching times. The maximum enhancement factors reach approximately 10(4) for 632.8 nm excitation, peak sharply in the approximately 200 nm thickness range for films prepared at optimum etching times, and show high spot to spot reproducibility with approximately 1 microm laser spot sizes, an indication that these films could be useful as durable, highly reproducible surface-enhanced Raman substrates.     

Influence of Process Parameters on the Reaction Kinetics of the Chromium‐Catalyzed Trimerization of Ethylene

In this paper we report the results of an extensive experimental kinetic study carried out on the novel ethylene trimerization catalyst system, comprising the chromium source [CrCl₃(thf)₃] (thf=tetrahydrofuran), a Ph₂P‐N(iPr)‐P(Ph)‐N(iPr)H (PNPNH) ligand (Ph=phenyl, iPr=isopropyl), and triethylaluminum (AlEt₃) as activator. It could be shown that the initial activity shows a first‐order dependency on the ethylene concentration. Also, a first‐order dependency was found for the catalyst concentration. The initial activity follows a typical Arrhenius behavior with an experimentally determined activation energy of 52.6 kJ mol^?1. At elevated temperatures (ca. 80 °C), a significant deactivation was observed, which can be tentatively traced back to a ligand rearrangement in the presence of AlEt₃. After a fast initial phase, a pronounced ‘kink’ in the ethylene‐uptake curve is observed, followed by a slow, almost linear, further increase of the total ethylene consumption. The catalyst composition, in particular the ligand/chromium and the cocatalyst/chromium molar ratio, has a strong impact on the catalytic performance of the trimerization of ethylene.     

Size-related vaporisation and ionisation of laser-induced glass particles in the inductively coupled plasma

Ongoing discussions about the origin of elemental fractionation occurring during LA-ICP-MS analysis show that this problem is still far from being well understood. It is becoming accepted that all three possible sources (ablation, transport, excitation) contribute to elemental fractionation. However, experimental data about the vaporisation size limit of different particles in the ICP, as produced in laser ablation, have not been available until now. This information should allow one to determine the signal contributing mass within the ICP and would further clarify demands on suitable laser ablation systems and gas atmospheres in terms of their particle size distribution.The results presented here show a vaporisation size limit of laser induced particles, which was found at particle sizes between 90 nm and 150 nm using an Elan 6000 ICP-MS. Due to the fact that the ICP-MS response was used as evaluation parameter, vaporisation and ionisation limits are not distinguishable.The upper limit was determined by successively removing the larger particles from the aerosol, which was created by ablation of a NIST 610 glass standard at a wavelength of 266 nm, using a recently developed particle separation device. Various particle fractions were separated from the aerosol entering the ICP. The decrease in signal intensity is not proportional to the decrease in volume, indicating that particles above 150 nm in diameter are not completely ionised in the ICP. Due to the limited removal range of the particle separation device, which cannot remove particles smaller than 150 nm, single hole ablations were used to determine the lower vaporisation limit. This is based on measurements showing that larger particles occur dominantly during the first 100 laser pulses only. After this period, the ratio of ICP-MS counts and total particle volume was found to be constant while most of the particles are smaller than 90 nm, indicating complete vaporisation and ionisation of these particles.To describe the influence of different plasma forward powers on the vaporisation limit, the range 1000–1600 W was studied. Results indicate that optimum vaporisation and ionisation occurs at 1300 W. However, an increase of the particle ionisation limit towards larger particles was not observed within the accuracy of this study using the full range of parameters available for optimisation on commonly used ICP-MS instruments.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

Systematic studies on the determination of Hg-labelled proteins using laser ablation-ICPMS and isotope dilution analysis

A method was developed for the precise and accurate determination of ovalbumin labelled with p-hydroxy-mercuribenzoic acid (pHMB) using polyacrylamide gel electrophoresis with ns-laser ablation–inductively coupled plasma mass spectrometry. Following systematic optimisation of the ablation process in terms of detection sensitivity, two different quantification strategies were applied: external calibration using standards of the derivatized protein after ¹³C⁺ normalization and, as a proof of concept, label-specific isotope dilution analysis (IDA) using pHMB enriched in the isotope ¹⁹⁹Hg. Due to the inhomogeneous distribution of the protein within the gel bands, it could be demonstrated that the IDA approach was superior in terms of precision and accuracy. Furthermore, it permits a reliable quantification, if more complex separation protocols are applied, as typically occurring analyte loss and degradation can be compensated for as soon as complete mixture of spike and sample is achieved. The estimated limit of detection was 160 fmol in the case of ovalbumin. In contrast to earlier studies using metals naturally present in proteins, no loss of mercury was observed during separation under denaturing conditions and other sample preparation steps. Using label-specific IDA, the measured isotope ratios in the gel corresponded to recoveries between 95% and 103%.     

Expanding the 0D Rb7M3X16 (M=Sb,Bi; X=Br,I) Family: Dual-Band Luminescence in Rb7Sb3Br16

Inorganic, lead-free metal halides are widely sought after following the rise of the halide perovskites as outstanding optoelectronic materials, due to their enhanced stability and reduced toxicity. Herein, we report on the solvothermal synthesis of Rb₇Sb₃Br₁₆, which exhibits a 0D structure comprised of [SbBr₆]³⁻ octahedra and edge-sharing bioctahedra [Sb₂Br₁₀]⁴⁻ dimers that order into layers along the c-axis. This all-inorganic material is air-stable and exhibits weak orange photoluminescence (PL) at room temperature. Low-temperature PL and PL excitation (PLE) measurements reveal the presence of two distinct emission bands that originate from these structural units, with the high-energy emission quenching as temperature rises beyond 150 K. We are also able to obtain Rb₇Bi₃Br₁₆ and Rb₇Bi₃I₁₆ which both crystallize in orthorhombic symmetry, with Rb₇Bi₃Br₁₆ presenting weak low-temperature luminescence while Rb₇Bi₃I₁₆ is non-luminescent. This work expands the library of emissive inorganic metal halides and provides further evidence for the efficacy of low-dimensional Sb−X luminescent centers based on octahedral and edge-sharing [Sb₂X₁₀]⁴⁻ dimers.     

Conversion of N-arylglycolohydroxamic acids to 1,2,3-oxathiazolidin-4-one 2,2-dioxides

N-Arylglycolohydroxamic acids 1A are converted by in situ prepared 2,2′-dipyridyl sulfite to 1,2,3-oxathiazolidin-4-one 2,2-dioxides 5 , the formation of which can be rationalized via a radical pair mechanism. The alkylating potential of the heterocyclic system 5 is demonstrated by the alkaline ethanolysis giving rise to the open chained 2-ethoxypropionanilide 6 .