Chemical Solution Deposition of ZnO Thin Films by an Aqueous Solution Gel Precursor Route

An aqueous chemical solution deposition method was used to prepare thin films of ZnO on SiO₂/Si (1 1 1) substrates. Starting from an aqueous solution of Zn acetate, citric acid and ammonia, very thin films could be deposited by spin coating. Heating parameters, necessary for thin film annealing, were determined using FTIR experiments on dried gel precursors, heated up to different temperatures. The morphology and the thickness of the films were investigated by SEM. It is found that homogeneous thin films with grain sizes of about 20 nm are formed. XRD experiments show that there is an indication that the films, crystallized at 500°C, exhibit preferential grain growth along the c-axis.     

A solvent-controlled switch of manganese complex assemblies with a beta-diketonate-based ligand

The coordination properties of the new polynucleating ligand H(3)L1 (1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene) with Mn(II/III) are described. Depending on the solvent used, the reaction of H(3)L1 with Mn(OAc)(2) yields either of the two new multinuclear assemblies [Mn(2)(HL1)(2)(py)(4)] (1) and [Mn(3)(HL1)(3)] (2), as revealed by X-ray crystallography. The structure of 2 is remarkable in that it shows a unique asymmetric triple-stranded helicate. Complexes 1 and 2 can be interconverted by controlling the solvent of the reaction system, and therefore, this ensemble constitutes an interesting externally addressable switch. In the presence of Mn(III)/pyridine, partial degradation of H(3)L1 occurs via oxidative cleavage, and the new complex [Mn(2)(L2)(2)(py)(4)] (3) is formed. The crystal structure of this complex has shown the fully deprotonated form of the new donor H(3)L2 (3-(3-oxo-3-phenylpropionyl)-5-methylsalicylic acid). From the same reaction, the Mn(II) complex 1 is also obtained. A rational synthesis of H(3)L2 is reported, and this has been used to prepare 3 in high yields, directly from its components. Variable-temperature magnetic susceptibility (chi(m)) measurements were performed on complexes 1-3 under a magnetic field of 1 kG. The data for each complex were fit to the appropriate chi(m) vs T theoretical equation, respectively. In 1, the Mn(II) ions are uncoupled, with g = 2.01. The data from 2 were fit by assuming the presence of an exchange coupled Mn(II)...Mn(II) pair next to a magnetically isolated Mn(II) center. The fit gave J = -2.75 cm(-1), g(12) = 1.97, and g(3) = 1.92, respectively. In 3, two models fit the experimental data. In the most satisfactory, the Mn(III) ions are coupled antiferromagnetically with J = -1.48 cm(-1) and g = 1.98 and a term for weak ferromagnetic intermolecular exchange is included with zJ' = 0.39 cm(-1). The other model contemplates the presence of two uncoupled zero field split Mn(III) ions.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Destructive adsorption of CCl4 over lanthanum-based solids: linking activity to acid-base properties

The relative activities of a low-surface crystalline and high-surface amorphous LaOCl, further denoted as S1 and S2, have been compared for the destructive adsorption of CCl4. It was found that the intrinsic activity of S2 is higher than that of S1. Both samples were characterized with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2-physisorption, and Raman and infrared (IR) spectroscopy. IR was used in combination with CO2, CO, and methanol as probe molecules. The CO2 experiments showed that different carbonate species are formed on both materials. For S1, a high surface concentration of bidentate carbonate species and a lower concentration of monodentate carbonate were observed. In the case of S2, bulk carbonates were present together with bridged carbonates. CO adsorption shows that S2 and S1 have very similar Lewis acid sites. However, methanol adsorption experiments showed that S2 had a higher number of stronger Lewis acid sites than S1 and that twofold coordinated methoxy species were more strongly bound than threefold coordinated methoxy species. Because of the analogy between methanol dissociation and the removal of the first chlorine atom in the destructive adsorption of CCl4, the sites enabling twofold coordination were likely to be the same Lewis acid sites actively involved in the destructive adsorption of CCl4. La2O3 was less active than the two LaOCl materials, and therefore, the intrinsic activity of the catalyst increases as the strength of the Lewis acid sites increases. S2 contains more chlorine at the surface than S1, which is expressed by the higher number of sites enabling twofold coordination. Moreover, this explains the difference in destructive adsorption capacity for CCl4 that was observed for the samples S1 and S2. Since LaCl3, being the most acidic phase, is not active for the destructive adsorption of CCl4, basic oxygen atoms, however, remain needed to stabilize the reaction intermediate CCl3 as La-O-CCl3.     

A new approach in assessing microbiological results in water analysis proficiency testing

Due to the relatively large spread in the results of microbiological proficiency tests, the z-scores are often not able to detect zero or low results as being ‘bad’ results. This paper describes an adapted z-score based on the average or the standard deviation of the 50% ‘highest’ results. The combination of the adapted z-scores of four samples enables a better judgement of the performance of each laboratory. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board or the Publisher.     

Simultaneous flow injection determination of ammoniacal nitrogen and chloride in industrial effluent water with a combined on-line gas diffusion/dialyser unit

An on-line gas diffusion/dialyser unit has been designed and incorporated into the manifold of a flow injection system for the simultaneous determination of two different species in a single sample injected into the FIA system. A fast and reliable fully automated two-component flow injection procedure has been carried out where a single sample (50 l industrial effluent water) is injected into a carrier stream and simultaneously gas diffused and dialysed in a single on-line gas diffusion/dialyser unit for the determination of ammonia and chloride, respectively. The results obtained for the ammoniacal nitrogen and chloride in industrial effluent water compared well with data obtained by standard methods. The relative standard deviation for industrial effluent water samples with concentrations of ammoniacal nitrogen in the range between 0.050 and 1 g/l and chloride from 0.127 to 2.531 g/l have been better than 1.0% for ammoniacal nitrogen and 0.5% for chloride, respectively. The proposed system could be attractive for routine analyses of industrial effluent water.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Photobinding of 8-methoxypsoralen, 4,6,4'-trimethylangelicin and chlorpromazine to Wistar rat epidermal biomacromolecules in vivo.

Photoinduced binding of drugs to endogenous biomacromolecules may cause both toxic and therapeutic effects. For example, photobinding of certain phenothiazines to biomolecules possibly underlies their phototoxic and photoallergic potential, whereas photobinding of furocoumarins to epidermal DNA is held responsible for their advantageous effects in the photochemotherapy of psoriasis. Usually, the in vitro photobinding of drugs is investigated. However, under in vivo conditions, the metabolism and distribution of the drug and the light absorption by endogenous compounds will significantly affect the photobinding of drugs to biomolecules. Therefore, in the present study, the photobinding of 8-methoxypsoralen (8-MOP), 4,6,4'-trimethylangelicin (TMA) (two therapeutically used furocoumarins) and chlorpromazine (CPZ) (a member of the phenothiazines) was investigated in vivo. The compounds were applied topically on the shaven skin of Wistar rats; one group was exposed to UVA and the other was kept in a dimly lit environment. Immediately, and at certain time intervals after UVA exposure, members of the two groups were sacrificed. By separating epidermal lipids, DNA/RNA and proteins by a selective extraction method, irreversible binding of 8-MOP, TMA or CPZ to each of these biomacromolecules was determined. In contrast with in vitro experiments, photobinding of CPZ to epidermal DNA/RNA was not found in vivo; apparently the bioavailability in the nucleus is very low. Compared with TMA, 8-MOP was observed to bind more extensively to epidermal DNA/RNA (again in contrast with findings from in vitro experiments) and proteins, but less extensively to lipids. The rates of removal of photobound 8-MOP and TMA were comparable. Photobound CPZ was more slowly removed from epidermal proteins and lipids than the furocoumarins. The observed in vivo photobinding is discussed with respect to the UVA-induced (side) effects of these drugs.     

The identification of flunitrazepam and its metabolites in urines samples

A thin-layer chromatographic method with fluorescence detection is described for the identification of flunitrazepam and its metabolites in urine. The method is based on the hydrolysis and subsequent formation of acridine derivatives by cyclization in dimethylformamide and is selective for benzodiazepines with a 2-fluorophenyl group. The method is applicable to urine samples even after an oral dose of only 2 mg of flunitrazepam. Flunitrazepam and flurazepam consumption can be distinguished.