Highly selective asymmetric hydrogenation using a three hindered quadrant bisphosphine rhodium catalyst

A concise synthesis of both enantiomers of ligand 2 and rhodium complex 5 is presented. The crux of the synthesis is a chiral HPLC separation of the enantiomers of 4. Rhodium complex 5 possesses three hindered quadrants in the steric environment within which a substrate binds. Evidence is presented that this configuration leads to high enantioselectivity (>99% ee) for rhodium-catalyzed asymmetric hydrogenation of alpha-acetamido dehydroamino acids, 6a-e. High enantioselectivities are also reported for the hydrogenation of a substrate precursor, 8, of pharmaceutical candidate, pregabalin. Advantages for large-scale hydrogenation of 8 using catalyst 5a vs Rh-Me-DuPhos are discussed.     

Circular dichroism, optical rotation and absolute configuration of 2-cyclohexenone-cis-diol type phenol metabolites: redefining the role of substituents and 2-cyclohexenone conformation in electronic circular dichroism spectra

The absolute configurations of 2-cyclohexenone cis-diol metabolites resulting from the biotransformation of the corresponding phenols have been determined by comparison of their experimental and calculated circular dichroism spectra (TDDFT at the PCM/B2LYP/Aug-cc-pVTZ level), optical rotations (calculated at the PCM/B3LYP/Aug-cc-pVTZ level) and by stereochemical correlation. It is found that circular dichroism spectra and optical rotations of 2-cyclohexenone derivatives are strongly dependent on the ring conformation (M or P sofa S(5) or half-chair), enone non-planarity and the nature and positions of the hydroxy and alkyl substituents. The effect of non-planarity of the enone chromophore, including the distortion of the C=C bond, is determined for the model structures by TDDFT calculations at the PCM/B2LYP/6-311++G(2d,2p) level. Non-planarity of the C=C bond in the enone chromophore is commonly encountered in 2-cyclohexenone derivatives and it is a source of significant rotatory strength contribution to the electronic circular dichroism spectra. It is shown that the two lowest-energy transitions in acrolein and 2-cyclohexenone and its derivatives are n(C=O)-π(C=O)* and π(C=C)-π(C=O)*, as expected, while the shorter-wavelength (below 200 nm) transitions are of more complex nature. In 2-cyclohexenone and its alkyl derivatives it is predominantly a mixture of π(C=C)-π(C=C)* and π(C=C)-σ* transitions, whereas the presence of hydroxy substituent results in a dominant contribution due to the n(OH)-π(C=O)* transition. A generalized model for correlation of the CD spectra of 2-cyclohexenones with their structures is presented.     

The redox chemistry of sulfenic acids

A persistent triptycenyl sulfenic acid is used as a model for cysteine-derived and other biologically relevant sulfenic acids in experiments which define their redox chemistry. EPR spectroscopy reveals that sulfinyl radicals are persistent and unreactive toward O(2), allowing the O-H bonding dissociation enthalpy (BDE) of the sulfenic acid to be readily determined by equilibration with TEMPO as 71.9 kcal/mol. The E° (RSO?/RSO(-)) and pK(a) of this sulfenic acid are also reported.     

Linking local environments and hyperfine shifts: a combined experimental and theoretical (31)P and (7)Li solid-state NMR study of paramagnetic Fe(III) phosphates

Iron phosphates (FePO(4)) are among the most promising candidate materials for advanced Li-ion battery cathodes. This work reports upon a combined nuclear magnetic resonance (NMR) experimental and periodic density functional theory (DFT) computational study of the environments and electronic structures occurring in a range of paramagnetic Fe(III) phosphates comprising FePO(4) (heterosite), monoclinic Li(3)Fe(2)(PO(4))(3) (anti-NASICON A type), rhombohedral Li(3)Fe(2)(PO(4))(3) (NASICON B type), LiFeP(2)O(7), orthorhombic FePO(4)·2H(2)O (strengite), monoclinic FePO(4)·2H(2)O (phosphosiderite), and the dehydrated forms of the latter two phases. Many of these materials serve as model compounds relevant to battery chemistry. The (31)P spin-echo mapping and (7)Li magic angle spinning NMR techniques yield the hyperfine shifts of the species of interest, complemented by periodic hybrid functional DFT calculations of the respective hyperfine and quadrupolar tensors. A Curie-Weiss-based magnetic model scaling the DFT-calculated hyperfine parameters from the ferromagnetic into the experimentally relevant paramagnetic state is derived and applied, providing quantitative finite temperature values for each phase. The sensitivity of the hyperfine parameters to the composition of the DFT exchange functional is characterized by the application of hybrid Hamiltonians containing admixtures 0%, 20%, and 35% of Fock exchange. Good agreement between experimental and calculated values is obtained, provided that the residual magnetic couplings persisting in the paramagnetic state are included. The potential applications of a similar combined experimental and theoretical NMR approach to a wider range of cathode materials are discussed.     

Hyperaromatic stabilization of arenium ions

Benzene-cis- and trans-1,2-dihydrodiols undergo acid-catalyzed dehydration at remarkably different rates: k(cis)/k(trans) = 4500. This is explained by formation of a β-hydroxycarbocation intermediate in different initial conformations, one of which is stabilized by hyperconjugation amplified by an aromatic no-bond resonance structure (HOC(6)H(6)(+) ? HOC(6)H(5) H(+)). MP2 calculations and an unfavorable effect of benzoannelation on benzenium ion stability, implied by pK(R) measurements of -2.3, -8.0, and -11.9 for benzenium, 1-naphthalenium, and 9-phenanthrenium ions, respectively, support the explanation.     

Fine-tuning of catalytic tin nanoparticles by the reverse micelle method for direct deposition of silicon nanowires by a plasma-enhanced chemical vapour technique

The reverse micelle method was used for the reduction of a tin (Sn) salt solution to produce metallic Sn nanoparticles ranging from 85 nm to 140 nm in diameter. The reverse micellar system used in this process was hexane-butanol-cetyl trimethylammonium bromide (CTAB). The diameters of the Sn nanoparticles were proportional to the concentration of the aqueous Sn salt solution. Thus, the size of the Sn nanoparticles can easily be controlled, enabling a simple, reproducible mechanism for the growth of silicon nanowires (SiNWs) using plasma-enhanced chemical vapour deposition (PECVD). Both the Sn nanoparticles and silicon nanowires were characterised using field-emission scanning electron microscopy (FE-SEM). Further characterisations of the SiNW's were made using transmission electron microscopy (TEM), atomic force microscopy (AFM) and Raman spectroscopy. In addition, dynamic light scattering (DLS) was used to investigate particle size distributions. This procedure demonstrates an economical route for manufacturing reproducible silicon nanowires using fine-tuned Sn nanoparticles for possible solar cell applications.     

Hydrogels based on carboxymethyl cassava starch cross-linked with di- or polyfunctional carboxylic acids: Synthesis, water absorbent behavior and rheological characterizations

Carboxymethyl cassava starch (CMS) was synthesized and its hydrogels were prepared by cross-linking it with di- or polyfunctional carboxylic acids using glutaric (CASXGLU), suberic (CASXSUB), pimelic (CASXPIM) and butanetetracarboxylic acids (CASBTC) as the cross-linkers. The characterization of the CMS showed that its degree of substitution was 0.86, average molar mass (M_w) was 5.6 × 10⁶ g mol⁻¹ and the ¹³C NMR showed strong peak at δ = 180.42 ppm which was assigned to the CO carbon in the carboxymethyl group. The absorption under load (AUL) and free swelling capacity (FSC) studies showed that the hydrogels have fast swelling properties and that they reached equilibrium after 1 h. Furthermore, all the hydrogels were sensitive to the increasing salt concentrations and pH of the medium. Both AUL and FSC reduced in saline solution while their values increased in alkaline buffer solutions. The result indicate that the difunctional carboxylic acids produced hydrogels with stronger material functions compared with the polyfunctional carboxylic acid and the order of increases in both AUL and FSC was CASXBTC, CASXPIM, CASXSUB and CASXGLU.     

Analysis of hydrogen peroxide and an organic hydroperoxide via the electrocatalytic Fenton reaction

A new concept for the electrochemical detection of hydrogen peroxide, and organic hydroperoxides is presented. One advantage of the significance of this technique is that it does not require chemical modification of the electrode or addition of enzymes. Direct electro-reduction of the peroxides was not observed on the carbon disk electrode as it is a kinetically slow process. Redox cycling of the iron complex is apparent as Fe^IIEDTA rapidly reduces the O-O bond of the peroxides (Fenton Reaction) upon its production by the kinetically facile electro-reduction of Fe^IIIEDTA. This provides an enhanced and steady-state reductive current as observed by cyclic voltammetry. These features are indicative of the electrocatalytic (EC′) mechanism. A calibration curve was constructed based on the chronoamperometric response at 32 s and a detection limit for H₂O₂ and t-butyl hydroperoxide was calculated to be 0.4 μM and 20 µM, respectively. This difference is attributable to the rate in which the iron(II) complex reduces the O-O bond, H₂O₂ (2.3 × 10⁵ M^− 1 s^− 1) being faster than for the organic peroxide (5.1 × 10⁴ M^− 1 s^− 1). The Fe^IIEDTA complex was observed to be unreactive toward dialkyl peroxides. This method may find use in the detection of peroxide-based explosives or in enzymatic assays as it is rapid, simple, inexpensive and should prove to be robust.     

Incorporation into paper of cellulose triacetate films containing semiconductor nanoparticles

CdSe/ZnS quantum dots (QDs) were embedded in films of cellulose triacetate (CTA) to give clear films with the broad absorbance and well-defined, size-tunable fluorescence characteristic of QDs. The relative quantum yields of the QDs in polymer were compared to that of the initial QDs dispersed in toluene. Alkaline hydrolysis of the film surfaces to regenerated cellulose rendered the previously hydrophobic CTA film surfaces hydrophilic and compatible with aqueous papermaking. Films containing combinations of different sized QDs gave more complex emission patterns. Small pieces of fluorescent films were added to pulp slurries and incorporated into laboratory paper sheets through hydrogen bonding between the regenerated cellulose film surfaces and cellulosic pulp fibers. The film system (cellulose ester bulk/cellulose surface) can be used to incorporate hydrophobic particles or molecules compatible with solutions of cellulosic polymers into paper products at both high and low loadings. QDs in paper may prove useful for security applications, such as sheets with unique optical signatures.     

Investigation of a catalyst ink dispersion using both ultra-small-angle X-ray scattering and cryogenic TEM

The dispersion of Nafion ionomer particles and Pt/C catalyst aggregates in liquid media was studied using both ultra-small-angle X-ray scattering (USAXS) and cryogenic TEM. A systematic approach was taken to study first the dispersion of each component (i.e., ionomer particles and Pt/C aggregates), then the combination of the components, and last the catalyst ink. Multiple-level curve fitting was used to extract the particle size, size distribution, and geometry of the Pt/C aggregates and the Nafion particles in liquid media from the scattering data. The results suggest that the particle size, size distribution, and geometry are not uniform throughout the systems but rather vary significantly. It was found that the interaction of each component (i.e., the Nafion ionomer particles and the Pt/C aggregates) occurs in the dispersion. Cryogenic TEM was used to observe the size and geometry of the particles in liquid directly and to validate the scattering results. The TEM results showed excellent agreement.