石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and dead Li have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

Fabrication and characterization of glutathione-responsive nanoparticles from the disulfide bond-bridged block copolymer

The purpose of this paper is to fabricate novel nanoparticles (NPs) from a single disulfide bond-bridged block copolymer poly(hydroxyethyl methacrylate)-S-S-polycaprolactone (PHEMA-S-S-PCL). The novel biomaterial was synthesized by ring-opening polymerization and reversible addition–fragmentation chain transfer polymerization. The cargo-free NPs were fabricated with the solvent evaporation method, and studies on NPs' characterizations were carried out. The hydrogen nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra confirmed the synthesis of PHEMA-S-S-PCL copolymer. Thermo-gravimetric analysis curves indicated that the obtained PHEMA-S-S-PCL copolymer had good thermostability. Transmission electron microscopy and dynamic light scatter results suggested that the cargo-free NPs were in round shapes with an average diameter of 103.6 ± 0.12 nm. The low critical micelle concentration of cargo-free NPs (7.9 × 10^?4 mg/ml) indicated that these NPs would keep their spherical shapes after being attenuated by abundant liquid (e.g., blood or body fluid). Furthermore, these NPs showed high stability at the presence of bovine serum albumin. Therefore, it could be speculated that these NPs would not be absorbed by proteins in blood, and they could be used as a candidate carrier for drug delivery.     

选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱及其光催化选择性双键转移的研究

席夫碱是一类具有多功能结构的化合物.本文使用二苯甲胺和苯乙酮为原料合成了(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱,并进行了光催化选择性双键转移的研究.结果 表明,当苯乙酮与二苯甲胺投料比为3∶1,先在135C反应4h,然后升温到165C继续反应3h,可选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱.该席...     

碳纤维微电极负载金纳米粒子用于绿茶中儿茶素的检测

本文开发了基于纳米金修饰的碳纤维超微电极(CFME)用于儿茶素的定量检测。通过使用柠檬酸三钠还原氯金酸制得纳米金粒子(AuNPs),采用恒电位电沉积法将纳米金修饰在CFME表面。在pH 2.00的Tris-HCl缓冲溶液中,采用差分脉冲法和循环伏安法考察了修饰前后电极对儿茶素的电催化性能。结果表明,纳米金修饰电极对儿茶素具有明显的电催化效果。在优化实验条件下,纳米金修饰的碳纤维超微电极(AuNPs/CFME)与儿茶素浓度在1.00×10^-3~10.0μmol/L范围内呈良好的线性关系,且AuNPs/CFME的电化学性能非常稳定,具有良好的重现性。该方法操作简单,准确性高,可用于对儿茶素进行定量检测。     

Novel 2,4-Diarylaminopyrimidine Derivatives Containing Pyridine Moiety:Design,Synthesis,Crystal Structure and Biological Evaluation

A series of 2,4-diarylaminopyrimidine derivatives containing pyridine structure were designed and synthesized.The crystal structures of compounds 5d and 5e were obtained from X-ray diffraction.The crystal structure of 5d (C₂₅H₂₀Cl FN₆O₂) belongs to the monoclinic system,space group P2₁/c with a=11.0500（10）,b=18.3045（17）,c=13.5646（9）?andβ=122.806（5）°.5e (C₂₅H₁₉Cl F₂N₆O₂) is of monoclinic ...     

铀酰与羧酸和肟基类配体相互作用的理论研究

深入了解各种功能基团与铀酰离子的络合行为有助于设计和开发高效海水提铀吸附剂. 本工作通过密度泛函理论(DFT)方法系统地研究了两种典型铀酰络合配体吡啶-2,6-二羧酸(H₂DPA)和戊二酰偕亚胺二肟(H₂A)与铀酰离子及碳酸根离子形成的配合物的结构、成键性质以及热力学稳定性. 研究结果表明, 所有配合物中, 配体与铀酰离子之间具有不同强度的共价相互作用. 由于H₂A配位时发生了质子重排, 而且配体的解离能较高, 使其更难与[UO₂(CO₃)₃]^4-发生取代反应, 因此H₂DPA配体是海水提铀中一种潜在的有效配体. 本工作的相关研究结果为海水提铀中高效吸附基团的设计和开发提供了理论线索.     

-电感耦合等离子体质谱法测定硅锰冶炼渣中8种金属元素

实验采用HCl-HNO₃-HF-HClO₄混合酸为消解体系对样品进行前处理,加入1.0 mL盐酸羟胺溶液(100 g/L)溶解残渣,选择合适的同位素,以¹⁰³Rh为内标测定Cr、Co、Ni、Cu、Zn和Cd,以¹⁹³Ir为内标测定Tl和Pb,建立了电感耦合等离子体质谱(ICP-MS)法测定硅锰冶炼渣中8种重金属元素的方法。实验发现,样品前处理选择HCl∶HNO₃∶HF∶HClO₄=5∶5∶5∶1,并在复溶阶段加入1.0 mL盐酸羟胺溶液(100 g/L)可以完全消解样品,实验采用KED模式和干扰系数校正法消除质谱干扰,样品中待测元素的测定结果不受基体成分的干扰。通过绘制校准曲线及测定流程空白,各元素校准曲线的相关系数均大于0.9999,方法检出限为0.006~0.19 mg/kg,方法定量限为0.018~0.57 mg/kg。对硅锰渣实际样品进行测定,各元素的相对标准偏差(RSD,n=11)在0.83%~4.1%,加标回收率为94.7%~106%;经过人员比对实验,相对偏差为-4.54%~4.24%。测定结果稳定可靠,能满足硅锰冶炼渣中8种微量金属元素含量的分析检测要求。     

A simulation of thermal characteristic parameters with an inverse “S” type curve

A synthetical equation is proposed to characterize the essential features of the inverse “S” type curve on the basis of summing-up simulation approach of “S” type curve. The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given. The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly(amide-imide) (PAI) respectively. It is found that some thermal characteristic parameters can be well estimated from the model simu-lated in computer.     

Phase behaviour and microstructures of microemulsions (I)

By the orthogonal design, the optimal formation conditions for the middle-phase microemulsions in the system dioctadecyldimethylammonium chloride (DODMAC)/ sodium dodecyl sulfate (SDS)/n-butanol/n-hep-tane/brine were obtained as follows: W_DODMAC: W_SDS = 1:4-1:5,C _π-butanol (%) = 11.0-12.0, andC _NaCl (%) = 3.25 Investigations have been made on the effects of the concentrations of NaCl and n-butanol (l.0%-14.0%), the ratios ofWDODMAC: to W_SDS, and the kinds of alcohols (n-propanol, n-butanol, and n-pentanol) on the formation, the phase behaviour, the ultralow interfacial tensions, the optimal salinity (S^*), and the length of salinity (δS). Some rules and data were worked out about the formation and characteristics of the middle-phase microemulsions. The mi-crostructures of the middle-phase microemulsions were also studied by using FT-IR, ESR, and freeze fracture electron microscopy techniques. The results from the three methods show that the microstructures of the middlephase mi-croemulsions undergo the change from O/W to bicontinuous (B.C.) and to W/O. The distribution rule of the orga-nized molecule assemblies in the middle-phase microemulsions is conducible to constructing the model of microemulsion systems, to recognizing the microstructures of the middle-phase microemulsions, and to setting forth the relationship between the microstructures and macro-properties of rnicroemulsions. Project supported by the Niltional Natural Science Foundation of China and the Chinese Postdoctoral Science Foundation.     

C60离子束撞击固体表面的坍塌与沉积(II)扫描隧道显微研究

Mass-selected C60 beam produced by laser ablation was accelerated and bombarded the (0001) surface of highly oriented pyrolitic graphite and (111) surface of gold single crystal. The samples were characterized by STM. The STM images showed that, the deposited species collapsed and formed planar structure on the solid surface, but the collapsed species were not dissociated and well oriented on the surface. Both positive and negative C60 ions were observed in the desorption mass spectra, confirming that the species collapsed on the solid surface are still the C60 clusters.