Prediction of the glass transition temperature for compatible polymer blends of varying compositions

Compatible polymer blends have been found to have widespread commercial applications. The simplest criterion for judging polymer—polymer miscibility in the solid state is the glass transition temperature (T_g), which can vary widely according to blend composition for a compatible system.Recently, an equation which predicts the T_g of intimate mixtures of compatible polymers has been derived, based on classical thermodynamics. Only a knowledge of the T_g and heat capacity increment (ΔC_p) of each pure component is required to predict the T_g at any composition.In this paper, the validity of this entropy-based relationship is investigated for a variety of commercial compatible polymer blends, including some based on poly(vinyl chloride), polystyrene, and poly(2,6-dimethyl-,4-phenylene oxide). The T_g and ΔC_p of each pure component are measured with a Perkin-Elmer DSC-2 differential scanning calorimeter, are predicted glass transition temperatures are compared with those observed experimentally.     

A very efficient,copper-free palladium catalyst for the Sonogashira reaction with aryl halides

The new complex [Pd[t-Bu2PCH2N(CH2Ph)CH2P t-Bu2](OAc)2] is a very efficient catalyst for the Sonogashira cross-coupling reaction of aryl halides with acetylenes at room temperature, without co-catalyst.     

Influence of structural changes on the ion selectivities of magnesium ionophores based on malonic acid diamides

In an investigation of octamethylene bis(malonic acid diamides) and their selectivities for magnesium, it was found that presence of secondary amides within the particular ionophore played a considerable role in the enhancement of magnesium selectivity. Similar effects in other ionophores, i.e. tris(malonic acid diamides), were thus systematically looked at with the help of selectivity measurements with the hope of optimizing the number of secondary and tertiary amides so as to improve the magnesium selectivity. The syntheses of several investigated tris(malonic acid diamide) isologues are equally reported.Deceased in November 1992     

Micromethod for the analysis of the four commonly used antiepileptic drugs using a jet tube column

We describe a simple method for the determination of phenobarbital, diphenylhydantoin, carbamazepine, and primidone in serum, by use of gas-liquid chromatography with temperature programming. The methylated derivatives of these anticonvulsants were well resolved, as was 5-(p-methylphenyl)-5-phenylhydantoin, the internal standard. In this procedure we used the jet tube for separation of the drug from the serum. The proposed procedure requires only 100 μl of serum and can be done in less than 30 min. The lower limit of detection for each of the drugs is 0.5 mg/liter. Analytical recoveries of drug from serum were excellent and peak height and concentration were linearly related up to twice the toxic concentration for serum.     

One-pot synthesis of β-amino acid derivatives via addition of bis(O-silyl) ketene acetals on iminium salts

We report here our findings on a new and highly efficient strategy for the synthesis of β-amino acids involving the addition of bis(O-silyl) ketene acetals on Mannich type iminium electrophiles.     

Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.     

Determination of aluminum in highly concentrated iron samples: Study of interferences using high-resolution continuum source atomic absorption spectrometry

High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) has been used to investigate spectral and non-spectral interferences found with a conventional line source atomic absorption spectrometer in the determination of aluminum in pharmaceutical products containing elevated iron and sugar concentrations. A transversely heated graphite furnace was used as the atomizer in both spectrometers. The two most sensitive aluminum lines at 309.3 nm and 396.2 nm were investigated and it was found that an iron absorption line at 309.278 nm, in the vicinity of the aluminum line at 309.271 nm, could be responsible for some spectral interference. The simultaneous presence of iron and the organic components of the matrix were responsible for radiation scattering, causing high continuous and also structured background absorption at both wavelengths. The aluminum and iron absorption could not be separated in time, i.e., the iron interference could not be eliminated by optimizing the graphite furnace temperature program. However, an interference-free determination of aluminum was possible carrying out the measurements with HR-CS AAS at 396.152 nm after applying least squares background correction for the elimination of the structured background. Analytical working range and other figures of merit were determined and are presented for both wavelengths using peak volume registration (center pixel ± 1) and the center pixel only. Limits of detection and characteristic masses ranged from 1.1 to 2.5 pg and 13 to 43 pg, respectively. The method was used for the determination of the aluminum contamination in pharmaceutical formulations for iron deficiency treatment, which present iron concentrations from 10 to 50 g l^− 1. Spike recoveries from 89% to 105% show that the proposed method can be satisfactorily used for the quality control of these formulations.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.