Influence of structural changes on the ion selectivities of magnesium ionophores based on malonic acid diamides

In an investigation of octamethylene bis(malonic acid diamides) and their selectivities for magnesium, it was found that presence of secondary amides within the particular ionophore played a considerable role in the enhancement of magnesium selectivity. Similar effects in other ionophores, i.e. tris(malonic acid diamides), were thus systematically looked at with the help of selectivity measurements with the hope of optimizing the number of secondary and tertiary amides so as to improve the magnesium selectivity. The syntheses of several investigated tris(malonic acid diamide) isologues are equally reported.Deceased in November 1992     

Solvent triggering between conformational states in amphiphilic shape-persistent macrocycles

The amphiphilic shape-persistent macrocycle 1 containing four phenol-OH groups as polar side groups and four hexyloxy groups as nonpolar side groups in an adaptable arrangement was recrystallized from solvents of different polarity. X-ray crystallography reveals that the conformation of the macrocycle is solvent dependent such that in the pyridine solvate only two of the nonpolar side groups point outward while in the THF solvate all four of them point outward. Moreover, in the latter case the three-dimensional packing leads to the formation of a supramolecular channel structure with a large pore size.     

Total synthesis of the polyenoyltetramic acid polycephalin C

The total synthesis of the polyenoyltetramic acid polycephalin C is described. Key steps of the synthesis include a double Swern oxidation, double Takai reaction and a double Stille reaction. In addition, the absolute stereochemistry of the ring junction has been determined by synthesis of both isomers and comparison of their CD spectra with natural polycephalin C.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

Time-resolved cryogenic modulation for targeted multidimensional capillary gas chromatography analysis

Multidimensional gas chromatography (MDGC) is performed in a new manner, described in this paper. The method incorporates two directly coupled columns and employs a longitudinally modulated cryogenic trap located between the columns. No heartcutting process is used, but rather a method better termed selected zone compression pulsing is used. Compared with normal MDGC, where primary column effluent has to be temporarily diverted either to a monitor detector or to the second dimension column, the new procedure in its simplest mode passes all of the first column effluent to the second column. It is simply the times at which the modulation of the trap is performed that determines which target solutes will be selected for enhanced separation. This approach allows almost instantaneous separation of selected zones on the second column, and has the potential to significantly simplify the MDGC method. Since data are presented in a time-response format, and do not require transformation as previously described for comprehensive GC when using the longitudinal modulator, quantitation and report generation are essentially the same as in any GC method and data system. Advantages also include significant sensitivity improvement. By using cryofocussing, and benefiting from the zone compression effects along with fast GC conditions on the second dimension, new possibilities for MDGC can be realised. The method is demonstrated by using a mixture of semi-volatile aromatic hydrocarbons.     

Extended Koopmans' theorem ionization potentials for beryllium atom shake-up transitions

The ionization potentials were calculated for Be using the extended Koopmans' theorem (EKT ) using several full configuration interaction (CI ) and multiconfigurational-self-consistent-field (MCSCF ) wave functions as reference wave functions. The wave functions used account for 89.7–96.7% of the correlation energy. Comparisons are made with experimental values and with δCI values calculated as the difference in energy obtained from CI wave functions for Be and Be⁺. The best EKT IP differed from the δCI value by 0.0003 eV for the lowest IP and by 0.0006 eV for ionization into the lowest ²P state of Be⁺. A calculation of ionization into the second ²P state of Be⁺ requires diffuse orbitals that are unimportant in the wave function for the ground state of Be. This results in small natural orbital occupation numbers for natural orbitals needed in the EKT calculation. © 1994 John Wiley & Sons, Inc.     

Micromethod for the analysis of the four commonly used antiepileptic drugs using a jet tube column

We describe a simple method for the determination of phenobarbital, diphenylhydantoin, carbamazepine, and primidone in serum, by use of gas-liquid chromatography with temperature programming. The methylated derivatives of these anticonvulsants were well resolved, as was 5-(p-methylphenyl)-5-phenylhydantoin, the internal standard. In this procedure we used the jet tube for separation of the drug from the serum. The proposed procedure requires only 100 μl of serum and can be done in less than 30 min. The lower limit of detection for each of the drugs is 0.5 mg/liter. Analytical recoveries of drug from serum were excellent and peak height and concentration were linearly related up to twice the toxic concentration for serum.     

Application of positive ion chemical ionisation and tandem mass spectrometry combined with gas chromatography to the trace level analysis of ethyl carbamate in bread

A rapid, sensitive and selective method has been developed and validated for the analysis of the contaminant ethyl carbamate (EC) in bread products at the part-per-billion level. The new procedure uses positive ion chemical ionisation (PICI) and tandem mass spectrometry (MS/MS), combined with gas chromatography (GC), on a 'bench-top' triple-quadrupole mass spectrometer. Ammonia was the PICI reagent gas of choice because of its ability to produce abundant [M+H]+ and [M+NH4]+ ions from EC and deuterium-labelled EC (LEC) used as an internal standard. For identification and quantification, selected reaction monitoring (SRM) was used to follow the precursor-to-product ion transitions of m/z 107 --> 90, m/z 107 --> 62 and m/z 90 --> 62 for EC, as well as m/z 112 --> 63 for the LEC internal standard. The limits of detection and quantification were 0.6 and 1.2 microg kg(-1), respectively, and the recovery of the method was 101 +/- 10% at 10 microg kg(-1) and 98 +/- 5% at 100 microg kg(-1). The precision of the method, established under conditions of intermediate reproducibility, did not exceed a relative standard deviation of 7%. The quantitative performance of the new GC/PICI-SRM procedure compared favourably with that of a reference method based on GC/MS and selected ion monitoring (correlation coefficient, r = 0.997). However, the new method had the advantages of reduced sample preparation time, improved sensitivity and unambiguous identification of EC at all concentrations. Application of the new method to the analysis of 50 UK breads showed that levels of EC ranged from 0.6 to 2.3 microg kg(-1) in retail products and from 3.1 to 12.2 microg kg(-1) for breads prepared using domestic breadmaking machines (dry weight basis). Toasting bread in a domestic toaster led to increases of between two- and three-fold in mean EC concentrations.     

One-pot synthesis of β-amino acid derivatives via addition of bis(O-silyl) ketene acetals on iminium salts

We report here our findings on a new and highly efficient strategy for the synthesis of β-amino acids involving the addition of bis(O-silyl) ketene acetals on Mannich type iminium electrophiles.     

Optimization of acid hydrolysis of sugarcane bagasse and investigations on its fermentability for the production of xylitol by Candida guilliermondii

The dilute-acid hydrolysis of sugarcane bagasse was optimized using a statistical experimental design resulting in hydrolysates containing 57.25 g/L of xylose, which were fermented with a high inoculum concentration (10 g/L of the yeast Candida guilliermondii IM/UFRJ 50088). The addition of urea reduced the time of conversion (t _C) to 75 h (without nitrogen source addition t _C>127 h), and, consequently, improving the rates of xylitol bioproduction. Fermentator experiments, using the optimized conditions, resulted in enhanced conversion rates, reducing t _C to 30 h. The stability of the yeast in the hydrolysate was also verified in a 480-h cultivation.