Pulsed amperometric detection (PAD) of diuretic drugs in herbal formulations using a gold electrode following ion-pair chromatographic separation

Herein, we present a new method based on separation by ion-pair chromatography with pulsed amperometric detection for evaluating various diuretics, including hydrochlorothiazide, chlorthalidone, furosemide, and amiloride, which are adulterants in herbal-based pharmaceutical formulations. The amperometric detection cycle (time?=?2 s) was performed at a gold electrode by applying a detection potential (E1) of +800 mV for 0.4 s and an oxidation potential (E2) of +1,000 mV for 0.40 s, followed by a reduction potential (E3) of ?200 mV for 1.20 s. The mobile phase for separating the diuretics was composed of 5 mmol L^?1 phosphate buffer and 0.3 mmol L^?1 sodium dodecyl sulfate in 50 % (v/v) methanol (pH 4.5). This method enabled the quantification of the drugs at low concentrations (i.e., 0.08 mg/capsule for hydrochlorothiazide, 0.01 mg/capsule for chlorthalidone, and 0.007 mg/capsule for furosemide). Twenty-six herbal formulations were analyzed, and eight samples (30.8 %) were found to contain diuretics that were added to the final composition (declared or not).     

Nanocarbon Paste Electrodes

The electrochemical behaviour of carbon paste electrodes prepared using nanocarbon and mineral oil was investigated and the results contrasted with different carbon and carbon pastes electrodes. The composition of carbon paste was studied by performing cyclic voltammetry performed in 0.1 M KCl solution in the presence of 4.0 mM Ru(NH₃)₆Cl₃, a well‐characterized redox system commonly used to test the electrode behaviour. After optimisation of the paste composition, the sensors chosen were tested for the analysis and characterization of three different systems: Ru(NH₃)₆^3+/2+, FcCH₂OH/FcCH₂OH⁺ and acetaminophen. The ability to obtain high quality voltammetry from the nanocarbon electrode was demonstrated and simulation of the voltammetry allowed the extraction of electrode kinetic parameters with high precision.     

Archaeometric investigations on naturally and thermally-aged iron-gall inks using different tannin sources

This paper investigates the behavior of paper strips containing iron-gall inks prepared with tannins from different sources, subjected to natural and thermally-induced aging. Results indicate that inks containing initial concentrations of ferrous sulphate ranging from 0.2 to 10.0 g are amenable to treatment with calcium phytate, and thata good correlation exists between the recovery of excess iron and the initial concentration. Infrared spectra showed an absorption band at 1,750 cm^?1, typical of esther, solely in the samples prepared with a condensed tannin. The condensed nature of this tannin produced a different oxidation pattern, with iron removal inferior to those observed from inks produced with hydrolisable tannins. When tannic acid was used ferrous iron removals ranged from 0.050 to 1.800 g, decreasing to 0.5 g in the presence of copper; the same behavior was observed for the remaining hydrolisable tannins, with a lower recovery from the condensed tannin. The adopted natural aging procedure released a higher amount of ferrous iron compared to ASTM thermal aging. This was probably due to the marked effect of humidity, not considered in the thermal procedure. A series of archaeometric possibilities were used to help elucidate the degradation of cellulose strips impregnated with iron-gall inks.      

Récréations et mathématiques mondaines au XVIII siècle: le cas de Guyot

In this paper, we study the most popular book of recreational mathematics published in the second half of the 18th century: The Nouvelles Récréations by Guyot. We indicate the motivations of the author, a simple postman, and the conditions which led him to write this book. We describe the spirit of the book and the public at which it aims. The success of the Nouvelles Récréations illustrates the rise of a science in polite society whose main goal is to amaze and amuse. Then, we examine the place of mathematics in this project and analyze the repertoire of problems and tricks. We focus on problems of combinatorics proposed by Guyot, like anagrams and card shuffles, which inspired some real mathematical work on the part of Monge and Gergonne.     

Extract from Eugenia punicifolia is an Antioxidant and Inhibits Enzymes Related to Metabolic Syndrome

The present study aimed to investigate in vitro biological activities of extract of Eugenia punicifolia leaves (EEP), emphasizing the inhibitory activity of enzymes related to metabolic syndrome and its antioxidant effects. The antioxidant activity was analyzed by free radicals scavengers in vitro assays: DPPH·, ABTS^·+, O₂ ^·?, and NO· and a cell-based assay. EEP were tested in inhibitory colorimetric assays using α-amylase, α-glucosidase, xanthine oxidase, and pancreatic lipase enzymes. The EEP exhibited activity in ABTS^·+, DPPH·, and O₂ ^·? scavenger (IC₅₀?=?10.5?±?1.2, 28.84?±?0.54, and 38.12?±?2.6 μg/mL), respectively. EEP did not show cytotoxic effects, and it showed antioxidant activity in cells in a concentration-dependent manner. EEP exhibited inhibition of α-amylase, α-glucosidase, and xanthine oxidase activities in vitro assays (IC₅₀?=?122.8?±?6.3; 2.9?±?0.1; 23.5?±?2.6), respectively; however, EEP did not inhibit the lipase activity. The findings supported that extract of E. punicifolia leaves is a natural antioxidant and inhibitor of enzymes, such as α-amylase, α-glucosidase, and xanthine oxidase, which can result in a reduction in the carbohydrate absorption rate and decrease of risks factors of cardiovascular disease, thereby providing a novel dietary opportunity for the prevention of metabolic syndrome.     

Preparation,thermal characterization,and DFT study of the bacterial cellulose

A bifunctional comonomer 3-aminocarbonyl-3-butenoic acid methyl ester (ABM) was designed and synthesized to prepare poly(acrylonitrile-co-3-aminocarbonyl-3-butenoic acid methyl ester) [P(AN-co-ABM)] copolymer which can be used as carbon fiber precursor instead of poly(acrylonitrile–acrylamide–methyl acrylate) [P(AN–AM–MA)] terpolymer. The stabilization mechanism and structural evolution of P(AN-co-ABM) and P(AN–AM–MA) during stabilization were studied by Fourier transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry, and thermogravimetry. The activation energy (E _a) of the cyclization reactions was calculated by Kissinger method and Ozawa method. The results show that the stabilization of P(AN-co-ABM) has been remarkably improved by ABM compared with P(AN–AM–MA) terpolymer, such as lower initiation temperature, broadened exothermic peak, larger extent of stabilization, and smaller E _a of cyclization, which is attributed to the initiation of ABM through ionic mechanism. Moreover, the spinnability of P(AN-co-ABM) is also improved by ABM due to the lubrication of ester groups in ABM. This study clearly shows that P(AN-co-ABM) copolymer is a better material used as carbon fiber precursor than P(AN–AM–MA) terpolymer.     

Unusual Structural Features in the Lysozyme Derivative of the Tetrakis(acetato)chloridodiruthenium(II,III) Complex

The reaction between the paddle‐wheel tetrakis(acetato)chloridodiruthenium(II,III) complex, [Ru₂(μ‐O₂CCH₃)₄Cl] and hen egg‐white lysozyme (HEWL) was investigated through ESI‐MS and UV/Vis spectroscopy and the formation of a stable metal–protein adduct was unambiguously demonstrated. Remarkably, the diruthenium core is conserved in the adduct while two of the four acetate ligands are released. The crystal structure of this diruthenium–protein derivative was subsequently solved through X‐ray diffraction analysis to 2.1 Å resolution. The structural data are in agreement with the solution results. It was found that HEWL binds two diruthenium moieties, at Asp101 and Asp119, respectively, with the concomitant release of two acetate ligands from each diruthenium center.     

Liquid chromatography tandem mass spectrometry method for the quantitative analysis of ceritinib in human plasma and its application to pharmacokinetic studies

Ceritinib is a highly selective inhibitor of an important cancer target, anaplastic lymphoma kinase (ALK). Because it is an investigational compound, there is a need to develop a robust and reliable analytical method for its quantitative determination in human plasma. Here, we report the validation of a liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the rapid quantification of ceritinib in human plasma. The method consists of protein precipitation with acetonitrile, and salting-out assisted liquid-liquid extraction (SALLE) using a saturated solution of sodium chloride prior to analysis by LC-MS/MS with electrospray ionization (ESI) technique in positive mode. Samples were eluted at 0.800 mL min^?1 on Ascentis Express® C₁₈ column (50 mm?×?2.1 mm, 2.7 μm) with a mobile phase made of 0.1 % formic acid in water (A) and 0.1 % formic acid in acetonitrile (B). The method run time was 3.6 min and the low limit of quantification (LLOQ) was estimated at 1.00 ng mL^?1 when using 0.100 mL of human plasma. The assay was fully validated and the method exhibited sufficient specificity, accuracy, precision, and sensitivity. In addition, recovery data and matrix factor (MF) in normal and in hemolyzed plasmas were assessed, while incurred samples stability (ISS) for ceritinib was demonstrated for at least 21 months at a storage temperature of ?65 °C or below. The method was successfully applied to the measurement of ceritinib in clinical samples and the data obtained on incurred samples reanalysis (ISR) showed that our method was reliable and suitable to support the analysis of samples from the clinical studies.     

Solubilisation of triolein by microemulsions containing C12E4/hexadecane/water: equilibrium and dynamics

Increasing triolein content of oil-in-water microemulsions in the pure C(12)E(4)/water/n-hexadecane/triolein system while maintaining a fixed surfactant concentration and volume fraction of drops raises the temperature of the solubilisation boundary, where excess oil separates, but has only a slight effect on the (higher) cloud point temperature, where excess water appears. Thus, the temperature range of the single-phase microemulsion shrinks and ultimately disappears. When such microemulsions are in equilibrium with excess oil, the hexadecane/triolein ratio is greater in the microemulsion, probably because the larger triolein molecules are unable to penetrate the hydrocarbon chain region of the surfactant films of the microemulsion droplets. Indeed, monolayer studies and calculations based on microemulsion and excess oil compositions indicate that the films have minimal triolein and similar ratios of hexadecane to surfactant. Triolein drops brought into contact with hexadecane-in-water microemulsions first swell as they incorporate hexadecane, then shrink owing to solubilisation. Interfacial tension decreases during this process until it becomes almost constant near 0.01 mN m(-1), suggesting that the drops in the final stages of solubilisation have high hexadecane contents. A microemulsion containing 10 wt% C(12)E(4) and 15 wt% hexadecane was able to remove over 50% of triolein from polyester fabric at 25 degrees C, more than twice that removed by an oil-free solution with the same surfactant concentration in similar experiments.     

A reproducible method for determination of nitrocellulose in soil

A reproducible analytical method for determination of nitrocellulose in soil is described. The new method provides the precision and accuracy needed for quantitation of nitrocellulose in soils to enable worker safety on contaminated sites. The method utilizes water and ethanol washes to remove co-contaminants, acetone extraction of nitrocellulose, and base hydrolysis of the extract to reduce nitrate groups. The hydrolysate is then neutralized and analyzed by ion chromatography for determination of free nitrate and nitrite. A variety of bases for hydrolysis and acids for neutralization were evaluated, with 5N sodium hydroxide and carbon dioxide giving the most complete hydrolysis and interference-free neutralization, respectively. The concentration of nitrocellulose in the soil is calculated from the concentrations of nitrate and nitrite and the weight percentage of nitrogen content in nitrocellulose. The laboratory detection limit for the analysis is 10mg/kg. The method acceptance range for recovery of nitrocellulose from control samples is 78-105%.