Cellulosic Films Obtained from the Treatment of Sugarcane Bagasse Fibers with N-methylmorpholine-N-oxide (NMMO)

Ethanol/water organosolv pulping was used to obtain sugarcane bagasse pulp that was bleached with sodium chlorite. This bleached pulp was used to obtain cellulosic films that were further evaluated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). A good film formation was observed when temperature of 74 °C and baths of distilled water were used, which after FTIR, TGA, and SEM analysis indicated no significant difference between the reaction times. The results showed this to be an interesting and promising process, combining the prerequisites for a more efficient utilization of agro-industrial residues.     

Separation and Immobilization of Lipase from Penicillium simplicissimum by Selective Adsorption on Hydrophobic Supports

Lipases are an enzyme class of a great importance as biocatalysts applied to organic chemistry. However, it is still necessary to search for new enzymes with special characteristics such as good stability towards high temperatures, organic solvents, and high stereoselectivity presence. The present work’s aim was to immobilize the lipases pool produced by Penicillium simplissicimum, a filamentous fungi strain isolated from Brazilian babassu cake residue. P. simplissicimum lipases were separated into three different fractions using selective adsorption method on different hydrophobic supports (butyl-, phenyl-, and octyl-agarose) at low ionic strength. After immobilization, it was observed that these fractions’ hyperactivation is in the range of 131% to 1133%. This phenomenon probably occurs due to enzyme open form stabilization when immobilized onto hydrophobic supports. Those fractions showed different thermal stability, specificity, and enantioselectivity towards some substrates. Enantiomeric ratio for the hydrolysis of (R,S) 2-O-butyryl-2-phenylacetic acid ranged from 1 to 7.9 for different immobilized P. simplissicimum lipase fractions. Asymmetry factor for diethyl 2-phenylmalonate hydrolysis ranged from 11.8 to 16.4 according to the immobilized P. simplissicimum lipase fractions. Those results showed that sequential adsorption methodology was an efficient strategy to obtain new biocatalysts with different enantioselectivity degrees, thermostability, and specificity prepared with a crude extract produced by a simple and low-cost technology.     

Novel zirconocene anticancer drugs?

From the reaction of Super Hydride (LiBEt₃H) with 6-(4-methoxyphenyl) fulvene (1a), 6-(2-fluoro-4-methoxyphenyl) fulvene (1b), and 6-(4-N,N-dimethylaminophenyl) fulvene (1c) lithiated cyclopentadienide intermediates (2a-c) were synthesised. These intermediates were then transmetallated to zirconium with ZrCl₄ to give benzyl-substituted zirconocenes bis-[(4-methoxybenzyl)cyclopentadienyl] zirconium(IV) dichloride (3a), bis-[(2-fluoro-4-methoxybenzyl)cyclopentadienyl] zirconium(IV) dichloride (3b) and bis-[(4-N,N-dimethylaminobenzyl)cyclopentadienyl] zirconium(IV) dichloride (3c). All three zirconocenes were characterised by single crystal X-ray diffraction and preliminary in vitro cell tests were performed with the zirconocene derivatives on the LLC-PK cell line in order to determine their cytotoxicity. Zirconocenes 3b and 3c did not show cytotoxicity up to a concentration of 170 μM, while 3a exhibited an IC50 value of 57 μM against LLC-PK.     

Growth Mechanism of Metal–Organic Frameworks: Insights into the Nucleation by Employing a Step‐by‐Step Route

One step at a time : The in situ monitoring of the step‐by‐step formation of metal–organic frameworks (MOFs) by using surface plasmon resonance (SPR), allows the nucleation process and the formation of the secondary building units to be investigated. Growth rates on functionalized organic surfaces with different crystallographic orientations can also be studied.

     

Effectiveness of natural and synthetic blocking reagents and their application for detecting food allergens in enzyme-linked immunosorbent assays

Blocking is an important step before an enzyme-linked immunosorbent assay (ELISA) can be performed. It reduces non-specific binding to the microtiter plate to a minimum. For detecting food allergens by means of ELISA, the problem with protein blocking solutions is obvious. The blocker might interfere with the antibodies of the assay and leads to false positive results. Therefore, other blocking solutions are greatly needed. There are some alternatives like synthetic blockers or carbohydrates. Comparisons of these different blocking agents, namely proteins, carbohydrates, and synthetic blockers, were made at different reaction conditions. The incubation periods and temperatures were varied, as well as the pH. The best combinations were evaluated and compared, in respect of their blocking efficiency. The two best non-proteinaceous blockers, i.e. polyvinylalcohol and Ficoll, were subsequently applied to ELISA tests for the determination of α-casein and peanut. The study showed that Ficoll and PVA did as well as BSA in buffer solution. Therefore, they can be considered as alternative blocking reagents for ELISA, especially for the detection of food allergens.     

Reduced order fully coupled structural–acoustic analysis via implicit moment matching

A reduced order model is developed for low frequency, undamped, fully coupled structural–acoustic analysis of interior cavities backed by flexible structural systems. The reduced order model is obtained by applying a projection of the coupled system matrices, from a higher dimensional to a lower dimensional subspace, whilst preserving essential properties of the coupled system. The basis vectors for projection are computed efficiently using the Arnoldi algorithm, which generates an orthogonal basis for the Krylov Subspace containing moments of the original system. The key idea of constructing a reduced order model via Krylov Subspaces is to remove the uncontrollable, unobservable and weakly controllable, observable parts without affecting the transfer function of the coupled system. Three computational test cases are analyzed, and the computational gains and the accuracy compared with the direct inversion method in ANSYS.     

Ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry for robust, high-throughput quantitative analysis of an automated metabolic stability assay, with simultaneous determination of metabolic data

The application of ultra-performance liquid chromatography coupled to time-of-flight mass spectrometry (UPLC/TOFMS) for high-throughput analysis of a 96-well plate based metabolic stability assay has been investigated. Full-scan data were acquired, with run times of 2.5-3.5 min, from which narrow window extracted ion chromatograms were generated, producing quantitative data for the test compound equivalent to that obtained by high-performance liquid chromatography with tandem mass spectrometric detection on a triple quadrupole instrument (HPLC/MS/MS). Sensitivity and mass accuracy were maintained over the analysis of >300 samples. Additionally, the UPLC/TOFMS datasets obtained gave access to metabolic route information, at no cost in terms of sensitivity for the test compound.     

Accurate ab initio potential for the Na+...I* complex

High-level ab initio calculations employing the multireference configuration interaction and coupled clusters methods with a correlation-consistent sequence of basis sets have been used to obtain accurate potential energy curves for the complex of the sodium cation with the iodine atom. Potential curves for the first two electronic Lambda-S states have very different characters: the potential for the 2pi state has a well depth of approximately 10 kcal/mol, while the 2sigma state is essentially unbound. This difference is rationalized in terms of the anisotropic interaction of the quadrupole moment of the iodine atom with the sodium cation, which is stabilizing in the case of the 2pi state and destabilizing in the case of the 2sigma state. The effects of spin-orbit coupling have been accounted for with both ab initio and semiempirical approaches, which have been found to give practically the same results. Inclusion of spin-orbit interactions does not affect the X(omega = 32) ground state, which retains its 2pi character, but it results in two omega = 12 spin-orbit states, with mixed 2sigma and 2pi characters and binding energies roughly half of that of the ground spin-orbit state. Complete basis set (CBS) extrapolations of potential curves, binding energies, and equilibrium geometries were also performed, and used to calculate a number of rovibronic parameters for the Na+...I* complex and to parameterize model potentials. The final CBS-extrapolated and zero-point vibrational energy-corrected binding energy is 10.2 kcal/mol. Applications of the present results for simulations of NaI photodissociation femtosecond spectroscopy are discussed.     

UVA and UVB decrease the expression of CD44 and hyaluronate in mouse epidermis, which is counteracted by topical retinoids

The transmembrane glycoprotein CD44 is currently thought to be the main cell surface receptor for the glycosaminoglycan hyaluronate. We previously showed that (1) CD44 regulate keratinocyte proliferation; (2) topical retinoids dramatically increase the expression of CD44, hyaluronate and hyaluronate synthase (HAS)s in mouse epidermis; (3) topical retinaldehyde restores the epidermal thickness and CD44 expression which are correlated with clinical improvement in lichen sclerosus et atrophicus lesions; and (4) retinaldehyde-induced proliferative response of keratinocytes is a CD44-dependent phenomenon and requires the presence of HB-EGF, erbB1 and matrix metalloproteinases. In this study, we analyzed the effect of UV irradiation on the levels of epidermal hyaluronate and CD44 in mice, as well as its potential prevention by topical retinoids. UVA (10 J/cm(2)) or UVB (1 J/cm(2)) irradiation significantly decreased the expression of CD44 and hyaluronate in the epidermis of hairless mice after 2 h. Expression of both epidermal CD44 and hyaluronate was reconstituted within 24 h. Topical application of retinaldehyde for 3 days prior to UVA or UVB irradiation prevented the decrease of CD44 and hyaluronate expression. Topical retinol and retinoic acid also increased the basal levels of epidermal CD44 and hyaluronate, although their preventive effect on UV-induced decrease of these molecules was less pronounced as compared to topical retinaldehyde. These data confirm the relationships between retinoid and CD44 pathways, although the primary target(s) of UV leading to CD44 and hyaluronate degradation remain to be elucidated.