First hyperpolarizability of polymethineimine with long-range corrected functionals

Using the long-range corrected (LC) density functional theory (DFT) scheme introduced by Iikura et al. [J. Chem. Phys. 115, 3540 (2001)] and the Coulomb-attenuating model (CAM-B3LYP) of Yanai et al. [Chem. Phys. Lett. 393, 51 (2004)], we have calculated the longitudinal dipole moments and static electronic first hyperpolarizabilities of increasingly long polymehtineimine oligomers. For comparison purposes Hartree-Fock (HF), Moller-Plesset perturbation theory (MP2), and conventional pure and hybrid functionals have been considered as well. HF, generalized gradient approximation (GGA), and conventional hybrids provide too large dipole moments for long oligomers, while LC-DFT allows to reduce the discrepancy with respect to MP2 by a factor of 3. For the first hyperpolarizability, the incorrect evolution with the chain length predicted by HF is strongly worsened by BLYP, Perdew-Burke-Ernzerhof (PBE), and also by B3LYP and PBE0. On the reverse, LC-BLYP and LC-PBE hyperpolarizabilities are correctly predicted to be positive (but for the two smallest chains). Indeed, for medium and long oligomers LC hyperpolarizabilities are slightly smaller than MP2 hyperpolarizabilities, as it should be. CAM-B3LYP also strongly improves the B3LYP results, though a bit less impressively for small chain lengths. The present study demonstrates the efficiency of long-range DFT, even in very pathological cases.     

Ultraviolet-C light for treatment of Candida albicans burn infection in mice

Burn patients are at high risk of invasive fungal infections, which are a leading cause of morbidity, mortality, and related expense exacerbated by the emergence of drug resistant fungal strains. In this study, we investigated the use of UVC light (254 nm) for the treatment of yeast Candida albicans infection in mouse third degree burns. In vitro studies demonstrated that UVC could selectively kill the pathogenic C. albicans compared with a normal mouse keratinocyte cell line in a light exposure dependent manner. A mouse model of chronic C. albicans infection in non-lethal third degree burns was developed. The C. albicans strain was stably transformed with a version of the Gaussia princeps luciferase gene that allowed real-time bioluminescence imaging of the progression of C. albicans infection. UVC treatment with a single exposure carried out on day 0 (30 min postinfection) gave an average 2.16-log(10)-unit (99.2%) loss of fungal luminescence when 2.92 J cm(-2) UVC had been delivered, while UVC 24 h postinfection gave 1.94-log(10)-unit (95.8%) reduction of fungal luminescence after 6.48 J cm(-2). Statistical analysis demonstrated that UVC treatment carried out on both day 0 and day 1 significantly reduced the fungal bioburden of infected burns. UVC was found to be superior to a topical antifungal drug, nystatin cream. UVC was tested on normal mouse skin and no gross damage was observed 24 h after 6.48 J cm(-2). DNA lesions (cyclobutane pyrimidine dimers) were observed by immunofluorescence in normal mouse skin immediately after a 6.48 J cm(-2) UVC exposure, but the lesions were extensively repaired at 24 h after UVC exposure.     

Thermally Activated Delayed Fluorescence in a Y3N@C80 Endohedral Fullerene: Time‐Resolved Luminescence and EPR Studies

The endohedral fullerene Y₃N@C₈₀ exhibits luminescence with reasonable quantum yield and extraordinary long lifetime. By variable‐temperature steady‐state and time‐resolved luminescence spectroscopy, it is demonstrated that above 60 K the Y₃N@C₈₀ exhibits thermally activated delayed fluorescence with maximum emission at 120 K and a negligible prompt fluorescence. Below 60 K, a phosphorescence with a lifetime of 192±1 ms is observed. Spin distribution and dynamics in the triplet excited state is investigated with X‐ and W‐band EPR and ENDOR spectroscopies and DFT computations. Finally, electroluminescence of the Y₃N@C₈₀/PFO film is demonstrated opening the possibility for red‐emitting fullerene‐based organic light‐emitting diodes (OLEDs).     

A Planar‐Chiral Rhodium(III) Catalyst with a Sterically Demanding Cyclopentadienyl Ligand and Its Application in the Enantioselective Synthesis of Dihydroisoquinolones

The rapid development of enantioselective C?H activation reactions has created a demand for new types of catalysts. Herein, we report the synthesis of a novel planar‐chiral rhodium catalyst [(C₅H₂^tBu₂CH₂^tBu)RhI₂]₂ in two steps from commercially available [(cod)RhCl]₂ and tert‐butylacetylene. Pure enantiomers of the catalyst were obtained through separation of its diastereomeric adducts with natural (S)‐proline. The catalyst promoted enantioselective reactions of aryl hydroxamic acids with strained alkenes to give dihydroisoquinolones in high yields (up to 97 %) and with good stereoselectivity (up to 95 % ee).     

Simplification of the 1H NMR spectra of enantiomers dissolved in chiral liquid crystals, combining variable angle sample spinning and selective refocusing experiments

This work presents a technique to simplify overcrowded proton spectra in chiral liquid crystal solvents using rotation of the sample near the magic angle, VASS, combined with homonuclear selective refocusing 2D NMR experiments, SERF. This methodology provides a powerful tool to visualise enantiomers out of unresolved proton spectra. A modified SERF sequence is presented where the resulting 2D spectrum can be phased to increase the resolution. Accurate enantiomeric excesses are determined that are not possible to measure on static samples. Two examples are presented.     

Facile synthesis of caerulomycin E by the formation of 2,2′-bipyridine core via a 2-pyridyl substituted 4H-pyran-4-one. Formal synthesis of caerulomycin A

A new approach to caerulomycins A and E via a 6-methyl-2-(2-pyridyl)-4H-pyran-4-one is described. The pyranone precursor is prepared by Claisen condensation of acetylacetone enol ether with ethyl picolinate.     

Determination of niacin in infant formula by solid-phase extraction/liquid chromatography: peer-verified method performance-interlaboratory validation

This paper reports the results of the interlaboratory peer validation study of AOAC Peer-Verified Method (PVM) 1:2,000 for the determination of niacin in infant formula by solid-phase extraction/liquid chromatography. We have used a Data Quality Objectives (DQO) approach to address not only method variability and robustness but also accuracy of data through the use of an appropriate reference material in conjunction with the interlaboratory validation study. Our DQO included the following: (1) statistical agreement of analytical results and quantitative recovery between 2 collaborating laboratories; (2) the repeatability relative standard deviation (RSDr) values and the HORRAT (Horwitz ratio) obtained (1.07), which satisfied the criteria of the Horwitz "limits of acceptability" at the analyte level present; (3) validation of lack of interference; and (4) accuracy agreement within assigned values for a certified reference material. National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula, with a certified value of 63.3 +/- 7.6 microg/g for niacin content, was used as a test material for collaborative study and accuracy assessment. Niacin values obtained by the originating laboratory were 59.7 +/- 4.0 microg/g (95% confidence interval [CI] = 1.4 microg/g with a relative standard deviation [RSD] of 6.7%) and by the peer laboratory were 56.6 +/- 6.6 microg/g (95% CI = 4.1 microg/g, with an RSD of 11.7%). Statistical evaluation using the means equivalence test showed that nicotinic acid values obtained by the peer laboratory were equivalent to those values obtained by the originating laboratory. Linear calibration curves and quantitative recovery were obtained. Integration of the PVM process with a readily available certified reference material gives the user confidence in the accuracy of the data generated by the method through traceability to the reference material used.     

Voltammetry coupled to mass spectrometry in the presence of isotope O labeled water for the prediction of oxidative transformation pathways of activated aromatic ethers: Acebutolol

The coupling between an electrochemical cell (EC) and a mass spectrometer (MS) is a useful screening tool (EC-MS) to study the oxidative transformation pathways of various electroactive species. For that purpose, we showed that the EC-MS method, carried out in the presence and absence of isotope ¹⁸O labeled water leads not only to a fast identification of oxidation products but also leads to a fast elucidation of the mechanism pathway reaction. We examined herein the case of the electrochemical hydrolysis of activated aromatic ether. Acebutolol (β-blockers) was selected herein as model of activated aromatic ether, and its electrochemical oxidation was examined in both the presence and absence of isotope ¹⁸O labeled water. To elucidate electrochemical hydrolysis pathway reaction: O-dealkylation or O-dealkoxylation, our approach was used to prove its applicability. The electrochemical oxidation mechanism was then elucidated showing an O-dealkoxylation reaction. In addition, density functional theory (DFT) calculations fully support the experimental conclusions.