Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.     

Alnumycins A2 and A3: new inverse-epimeric pairs stereoisomeric to alnumycin A1

Two new pairs of stereoisomeric alnumycin As, A2 {(2)-(1R,1′RS,4′SR,5′SR)} and A3 {(2)-(1R,1′RS,4′SR,5′RS)}, are described. Similar to alnumycin A1 {(2)-(1R,1′RS,4′RS,5′SR)}, each of these naturally occurring compounds is also a pair of C-1 inverse epimers. The relative configurations of the dioxane ring sidechains were assigned on the basis of ¹H NMR NOE contacts and molecular modeling using density functional theory (DFT) at the M06-2X/6-31G(d) level of theory. The absolute configurations of C-1 and the determination of inverse epimeric relationships were achieved by experimental electronic circular dichroism (ECD) measurements, with both aspects confirmed by using the chiral derivatizing agent (CDA) Mosher′s acid chloride {α-methoxy-α-trifluorophenylacetyl chloride (MTPACl)} to effect enantiodifferentiation. The absolute configurations of the dioxane ring using the CDA could only be effected in the case of alnumycin A1, the results of which were in agreement with previous assignments. The dioxane ring conformational mobility and the likely interaction between the MTPA groups coupled with the structural novelty of the diols in the dioxane ring with respect to CDA analysis precluded an absolute configuration assignment for alnumycins A2 and A3 based on empirical comparisons or by computational analysis of through-space NMR shieldings (TSNMRS) emanating from the phenyl groups of the MTPA moieties.     

Synthesis of 2-amino-5,5-dialkyl-4-arylmethylidene-2-oxazolines from 2-alkyl-4-arylbut-3-yn-2-ols and guanidine

Reaction between 2-alkyl-4-arylbut-3-yn-2-ols and guanidine in refluxing pyridine affords 2-amino-5,5-dialkyl-4-arylmethylidene-2-oxazolines.     

Constructions of Binary Codes Based on Bipartite Graphs

In this paper, we construct some families of binary linear and nonlinear codes by using various bipartite graphs. Furthermore, we also determine some conditions for the constructed binary linear code to be a maximum distance separable code.     

Concurrent Covalent and Supramolecular Polymerization

Covalent and supramolecular polymerizations, both of which offer their own unique advantages, have emerged as popular strategies for making artificial materials. Herein, we describe a concurrent covalent and supramolecular polymerization strategy—namely, one which utilizes 1) a bis‐azide‐functionalized diazaperopyrenium dication that undergoes polymeriation covalently with a bis‐alkyne‐functionalized biphenyl derivative in one dimension as a result of a rapid and efficient β‐cyclodextrin(CD)‐accelerated, cucurbit[6]uril(CB)‐templated azide–alkyne cycloaddition, while 2) the aromatic core of the dication is able to dimerize in a criss‐cross fashion by dint of π–π interactions, enabling simultaneous supramolecular assembly, resulting in an extended polymer network in an orthogonal dimension.     

Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

Expedient Strategy for the Synthesis of 5-Acylethynylpyrrole-2-carbaldehydes

5-Acylethynylpyrrole-2-carbaldehydes have been synthesized from the protected pyrrole-2-carbaldehydes by their transition-metal-free topochemical mechanoactivated ethynylation with acylbromoacetylenes in a solid Al₂O₃ medium (room temperature, 6 h, 41–54% yields).     

A Convenient Method for the Synthesis of α-Functionalized Chlorophosphonic Esters

α-Functionalized chlorophosphonic monoesters were easily prepared by a selective chlorination of the corresponding phosphonic diesters with phosphorus oxychloride.