Measurement of lactate in whole human blood with near-infrared transmission spectroscopy

We have evaluated the potential of near-infrared spectroscopy (NIRS) as a technique for rapid analysis of lactate in whole blood. To test the NIRS technique, a comparison was made with a standard clinical method using whole blood samples taken from five exercising human subjects at three different stage of exercise. To expand lactate concentration within the physiological range, standard additions method was used to generate 45 unique data points. Spectra were collected over the 2050-2400 nm spectral range with a 1 mm optical path length quartz cell. Reference lactate concentrations in the samples were determined by enzymatic measurements. Estimates and calibration of the lactate concentration with NIRS was made using partial least squares (PLS) regression analysis and leave-N-out cross validation on second derivative spectra. Separate calibrations were determined from each of the subject samples and cumulative PRESS was used to determine the number of PLS factors in the final model. The results from the PLS model presented are generated from the five individual calibration coefficient vectors and provided a correlation coefficient of 0.978 and a standard error of cross validation of 0.65 mmol l⁻¹ between the enzymatic assay and the NIRS technique. To study the parameters that impact the spectra baseline and the correlation between the calculated model and the data, referenced measurements of lactate against baseline spectrum were made for each individual. A correlation coefficient of 0.992 and a standard error of cross validation of 0.21 mmol l⁻¹ were found. The results suggest that NIRS may provide a valuable tool to assess physiological status for both research and clinical needs.     

Enantiopure fluorous bis(oxazolines): synthesis and applications in catalytic asymmetric reactions

Various enantiopure fluorous bis(oxazolines) with fluorine content between 52.7 and 58.7% have been synthesized by a simple reaction sequence that involved the introduction of two fluorinated ponytails by alkylation of the corresponding nonfluorous bis(oxazolines). These new ligands have been used in palladium-catalyzed alkylation of rac-(E)-1,3-diphenylpropenyl acetate with carbon nucleophiles and in copper-catalyzed oxidation of cycloalkenes; these ligands exhibited enantioselectivities up to 98 and 77%, respectively, quite close to the values obtained using the analogous nonfluorous bis(oxazolines). These ligands could be easily recovered by liquid-liquid extraction or solid-liquid separation and reused with the same enantioselectivities.     

Synthesis and structural characterization of a terminal hydroxide containing alumoxane via hydrolysis of aluminum hydrides

A novel terminal hydroxide containing dinuclear alumoxane LAl(OH)OAlL(OCH=N-tBu) (3; L = HC(CMeNAr)2, Ar = 2,6-iPr2C6H3) was prepared by treatment of aluminum dihydride LAlH2 (1) and tert-butyl isocyanate in the presence of trace amounts of water and alternatively from 1 and LAlH(OCH=N-tBu) (2) with water. Compound 2 was obtained from the reaction of 1 and tert-butyl isocyanate.     

State-transition structures in physics and in computation

In order to establish close connections between physical and computational processes, it is assumed that the concepts of state and of transition are acceptable both to physicists and to computer scientists, at least in an informal way. The aim of this paper is to propose formal definitions of state and transition elements on the basis of very low level physical concepts in such a way that (1) all physically possible computations can be described as embedded in physical processes; (2) the computational aspects of physical processes can be described on a well-defined level of abstraction; (3) the gulf between the continuous models of physics and the discrete models of computer science can be bridged by simple mathematical constructs which may be given a physical interpretation; (4) a combinatorial, nonstatistical definition of information can be given on low levels of abstraction which may serve as a basis to derive higher-level concepts of information, e.g., by a statistical or probabilistic approach. Conceivable practical consequences are discussed.     

Promotion of nickel catalysts for the steam reforming of methane

The influence of additives (Cu, Fe and Al₂O₃) on the textural and catalytic properties of nickel in steam reforming of methane is described. The effects of structural promoting by Al₂O₃ and of electronic promoting by copper are reported. The rate of steam reforming of methane was measured in a gradientless reactor at atmospheric pressure.

---

(Cu, Fe Al₂O₃) . Al₂O₃ . .

     

Extension of the tandem conjugate addition-Dieckmann condensation: the formal synthesis of tetracenomycin A2

Tandem cuprate addition-Dieckmann condensation is featured in the construction of the polyketide metabolite tetracenomycin A(2). Thus, cyclization substrate 11 was treated with Gilman cuprate Me(2)CuLi to afford anthracene 12. The phenolic acetate protecting group of 12ensured its chemoselective oxidation to reveal terminal quinone 13, which intercepts the previously reported synthesis of tetracenomycin A(2).     

Stochastic detection of motor protein-RNA complexes by single-channel current recording.

A label- and immobilization-free approach to detecting the reversible formation of complexes between nucleic acids and proteins at the single-molecule level is described. The voltage-driven translocation of individual oligoribonucleotides through a nanoscale protein pore is observed by single-channel current recordings. The oligoribonucleotide 5'-C25A(25)-3' gives rise to current blockades with an average duration of approximately 0.5 ms. In the presence of the RNA-binding ATPase P4, a viral packaging motor from bacteriophage phi8, longer events of tens to hundreds of milliseconds are observed. Upon addition of ATP the long events disappear, indicating the dissociation of the P4RNA complex. The frequency of events also depends on the concentration of P4 and the length of the oligoribonucleotide, thereby confirming the specificity of the P4RNA events. This study shows that single-channel current recordings can be used to monitor RNA-protein complex formation, thus opening up a new means to examine the motor activity of RNA- or DNA-processing enzymes.     

Characterization of molybdenum carbide nanoparticles formed on Au(111) using reactive-layer assisted deposition

Temperature programmed desorption (TPD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM) have been used to characterize molybdenum carbide nanoparticles prepared on a Au(111) substrate. The MoC(x) nanoparticles were formed by Mo metal deposition onto a reactive multilayer of ethylene, which was physisorbed on a Au(111) substrate at low temperatures (<100 K). The resulting clusters have an average diameter of approximately 1.5 nm and aggregate in the fcc troughs located on either side of the elbows of the reconstructed Au(111) surface. Core level XPS shows that the electronic environment of the Mo and C atoms in the nanoparticles is similar to that found in Mo(2)C(0001) single crystals and carburized Mo metal surfaces. Peak intensities in XPS and AES spectra were used to estimate an average Mo/C atomic ratio of 1.2 +/- 0.3 for nanoparticles annealed above 600 K.     

The nonsymmetric pressure tensor in polyatomic fluids

Nonequilibrium molecular dynamics calculations are used to show that polyatomic fluids can support antisymmetric stress. In a homogeneous system where the time dependence of vorticity is a step function, it is shown that the rate at which intrinsic angular velocity approaches its steady-state value ( = 1/2 × u) is determined by the magnitude of the antisymmetric part of the pressure tensor.     

Micro- and nano-mechanical characterization of polyamide 11 and its composites containing cellulose nanofibers

Nanocomposites from polyamide 11 and dried cellulose nanofibers (CNs), 16–30 nm in thickness and 50–400 nm in length, were prepared via direct melt mixing and their micro- and nano-mechanical properties were studied. (PF) QNM (Quantitative Nanomechanical Mapping) method was used to map nanomechanical properties at the surface of polyamide 11 and nanocomposites. This new AFM method emphasized both the increased modulus in nanocomposites as compared to the matrix and the microstructure on different levels in polyamide 11 and its nanocomposites. PF QNM showed that their crystalline structure consists of bundles of lamellar stacks, 200–350 nm in width and 20–40 nm wide lamellar stacks. Moreover, PF QNM study emphasized higher structural order in nanocomposites with 3 and 5 wt.% CNs and lower in the nanocomposite with 8 wt.% CNs as compared to the reference. These observations were verified and are consistent with both crystallinity values determined by DSC and micro-mechanical test results. The oriented bundles of lamellar stacks, observed by PF QNM, could be considered as the main blocks determining high mechanical properties for the studied nanomaterials.