Elongation method with intermediate mechanical and electrostatic embedding for geometry optimizations of polymers

The elongation method with intermediate mechanical and electrostatic embedding (ELG-IMEE) is proposed. The electrostatic embedding uses atomic charges generated by a charge sensitivity analysis (CSA) method and parameterized for three different population analyses, namely, the Merz–Singh–Kollman scheme, the charge model 5, and the atomic polar tensor. The obtained CSA models were tested on two model systems. Test calculations show that the electrostatic embedding provides several times of decrease in the difference of energies of testing and reference calculations in comparison with the conventional elongation approach (ELG). The mechanical embedding is implemented in a combination of the conventional elongation method and the ONIOM approach. Moreover, it was demonstrated that the geometry optimization with the ELG-IMEE reduces the errors in the optimized structures by about one order in root-mean-square deviation, when compared to ELG.     

Photodynamic Activity on Biofilm in Endotracheal Tubes of Patients Admitted to an Intensive Care Unit

Ventilator-associated pneumonia (VAP) is an infection that arises after endotracheal intubation affecting patients under intensive care. The presence of the endotracheal tube (ETT) is a risk factor since it is colonized by multispecies biofilm. Antimicrobial photodynamic therapy (aPDT) could be a strategy to decontaminate ETTs. We verify if methylene blue (MB) associated with external illumination of the ETT could be an alternative to destroy biofilm. We performed an in vitro and ex vivo study. In vitro study was performed with P. aeruginosa biofilm grew over ETT for 7 days. After treatment, the surviving cells were cultured for 3 days and the biofilm was analyzed by crystal violet absorbance. Ex vivo study employed ETT obtained from extubated patients. aPDT was performed with MB (100 µm ) and red LED (λ = 640±20 nm). We quantified the biofilm thickness and used scanning electron microscopy and fluorescence technique to verify morphological and functional changes after aPDT. Our results showed that bacteria remain susceptible to aPDT after sequential treatments. We also attested that aPDT can reduce biofilm thickness, disrupt biofilm attachment from ETT surface and kill microbial cells. These data suggest that aPDT should be investigated to decrease VAP incidence via ETT decontamination.     

Comparison of Proton Acceptor and Proton Donor Properties of H2O and H2O2 in Organic Crystals of Drug-like Compounds: Peroxosolvates vs. Crystallohydrates

Two new peroxosolvates of drug-like compounds were synthesized and studied by a combination of X-ray crystallographic, Raman spectroscopic methods, and periodic DFT computations. The enthalpies of H-bonds formed by hydrogen peroxide (H₂O₂) as a donor and an acceptor of protons were compared with the enthalpies of analogous H-bonds formed by water (H₂O) in isomorphic (isostructural) hydrates. The enthalpies of H-bonds formed by H₂O₂ as a proton donor turned out to be higher than the values of the corresponding H-bonds formed by H₂O. In the case of H₂O₂ as a proton acceptor in H-bonds, the ratio appeared reversed. The neutral O∙∙∙H-O/O∙∙∙H-N bonds formed by the lone electron pair of the oxygen atom of water were the strongest H-bonds in the considered crystals. In the paper, it was found out that the low-frequency Raman spectra of isomorphous crystalline hydrate and peroxosolvate of N-(5-Nitro-2-furfurylidene)-1-aminohydantoin are similar. As for the isostructural hydrate and peroxosolvate of the salt of protonated 2-amino-nicotinic acid and maleic acid monoanion, the Raman spectra are different.     

The Theoretical and Experimental Investigation of the Fluorinated Palladium β-Diketonate Derivatives: Structure and Physicochemical Properties

To search for new suitable Pd precursors for MOCVD/ALD processes, the extended series of fluorinated palladium complexes [Pd(CH₃CXCHCO(R))₂] with β-diketone [tfa−1,1,1-trifluoro-2,4-pentanedionato (1); pfpa−5,5,6,6,6-pentafluoro-2,4-hexanedionato (3); hfba−5,5,6,6,7,7,7-heptafluoro-2,4-heptanedionato (5)] and β-iminoketone [i-tfa−1,1,1-trifluoro-2-imino-4-pentanonato (2); i-pfpa−5,5,6,6,6-pentafluoro-2-imino-4-hexanonato (4); i-hfba-5,5,6,6,7,7,7-heptafluoro-2-imino-4-heptanonato (6)] ligands were synthesized with 70–80% yields and characterized by a set of experimental (SXRD, XRD, IR, NMR spectroscopy, TG) and theoretical (DFT, Hirshfeld surface analysis) methods. Solutions of Pd β-diketonates contained both cis and trans isomers, while only trans isomers were detected in the solutions of Pd β-iminoketonates. The molecules 2–6 and new polymorphs of complexes 3 and 5 were arranged preferentially in stacks, and the distance between molecules in the stack generally increased with elongation of the fluorine chain in ligands. The H…F contacts were the main ones involved in the formation of packages of molecules 1–2, and C…F, F…F, NH…F contacts appeared in the structures of complexes 4–6. The stability of complexes and their polymorphs in the crystal phases were estimated from DFT calculations. The TG data showed that the volatility differences between Pd β-iminoketonates and Pd β-diketonates were minimized with the elongation of the fluorine chain in the ligands.     

Dependence of calibration sensitivity of a polysulfone/Ru(II)-tris(4,7-diphenyl-1,10-phenanthroline)-based oxygen optical sensor on its structural parameters

The optimum performance of an optical oxygen sensor based on polysulfone (PSF)/[Ru(II)-Tris(4,7-diphenyl-1,10-phenanthroline)] octylsulfonate (Ru(dpp)OS) was checked by carefully tuning the parameters affecting the membrane preparation. In particular, membranes having thickness ranging between 0.2 and 8.0 μm with various luminophore concentrations were prepared by dip-coating and tested. The membrane thickness was controlled by tuning the solution viscosity, and was measured both by secondary ion mass spectrometry (SIMS) and by visible spectroscopy (Vis). Luminescence-quenching-based calibration was a single value of the Stern-Volmer constant (K^′SV) for membranes containing up to 20 mmol Ru(dpp) g⁻¹ PSF (1.35 μm average thickness). The K^′SV value decreased for larger concentration. The highest sensitivity was obtained with membrane thickness around 1.6 μm, having a response time close to 1 s. Thicker membranes exhibited an emission saturation effect and were characterized by longer response time. The K^′SV behavior was interpreted on the basis of a mathematical approach accounting for the contribution of luminescence lifetime (τ₀), oxygen diffusion coefficient (DO₂) and oxygen solubility inside the membrane (sO₂) establishing the role of all of them and allowing their experimental determination. Moreover, a simple experimental way to estimate K^′SV without needing calibration was proposed. It was based either on the light emission asymmetry or on the percent variation of light emission on passing from pure nitrogen to pure oxygen.     

An improved multimodal method for sound propagation in nonuniform lined ducts

An efficient method is proposed for modeling time harmonic acoustic propagation in a nonuniform lined duct without flow. The lining impedance is axially segmented uniform, but varies circumferentially. The sound pressure is expanded in term of rigid duct modes and an additional function that carries the information about the impedance boundary. The rigid duct modes and the additional function are known a priori so that calculations of the true liner modes, which are difficult, are avoided. By matching the pressure and axial velocity at the interface between different uniform segments, scattering matrices are obtained for each individual segment; these are then combined to construct a global scattering matrix for multiple segments. The present method is an improvement of the multimodal propagation method, developed in a previous paper [Bi et al., J. Sound Vib. 289, 1091-1111 (2006)]. The radial rate of convergence is improved from O(n(-2)), where n is the radial mode indices, to O(n(-4)). It is numerically shown that using the present method, acoustic propagation in the nonuniform lined intake of an aeroengine can be calculated by a personal computer for dimensionless frequency K up to 80, approaching the third blade passing frequency of turbofan noise.     

The UV,blue and green up-conversion luminescence of PbF2+GeO2:Er2O3 pumped with 650 nm

A detailed study of the spectroscopic properties of the PbF₂+GeO₂:Er₂O₃ vitroceramic sample upon 650 nm excitation was investigated. The absorption, emission, excitation spectra, and time-resolved spectra have been measured. The up-conversion of red radiation (650 nm) into UV (368 nm and 379 nm), blue (406.8 nm) and green (522 nm and 540 nm) emissions is observed for Er³⁺ ions in the sample. The up-conversion process involves a two-photon absorption for the violet, blue, and green emission bands. A three-photon process happens for another violet (379 nm) band.     

Irrationalité de Valeurs Associées a l'Exponentielle de Carlitz

Lete and be the Carlitz-module analogues of their usual counterparts. We have proved in [4]-that these elements of are algebraically independent over whenq3. We study here the remaining caseq=2 and prove among other things that 1,e, are linearly independent over .

     

Optoelectronic,Aggregation, and Redox Properties of Double-Rotor Boron Difluoride Hydrazone Dyes

We develop the chemistry of boron difluoride hydrazone dyes (BODIHYs) bearing two aryl substituents and explore their properties. The low-energy absorption bands (λ_max=427–464 nm) of these dyes depend on the nature of the N-aryl groups appended to the BODIHY framework. Electron-donating and extended π-conjugated groups cause a redshift, whereas electron-withdrawing groups result in a blueshift. The title compounds were weakly photoluminescent in solution and strongly photoluminescent as thin films (λ_PL=525–578 nm) with quantum yields of up to 18 % and lifetimes of 1.1–1.7 ns, consistent with the dominant radiative decay through fluorescence. Addition of water to THF solutions of the BODIHYs studied causes molecular aggregation which restricts intramolecular motion and thereby enhances photoluminescence. The observed photoluminescence of BODIHY thin films is likely facilitated by a similar molecular packing effect. Finally, cyclic voltammetry studies confirmed that BODIHY derivatives bearing para-substituted N-aryl groups could be reversibly oxidized (E_ox1=0.62–1.02 V vs. Fc/Fc⁺) to their radical cation forms. Chemical oxidation studies confirmed that para-substituents at the N-aryl groups are required to circumvent radical decomposition pathways. Our findings provide new opportunities and guiding principles for the design of sought-after multifunctional boron difluoride complexes that are photoluminescent in the solid state.