PHOTOCHEMICAL INTERACTIONS BETWEEN NITROXIDE FREE RADICALS AND PHENOTHIAZINES IN SOLUTION

Abstract— Ultraviolet irradiation of photosensitive molecules like phenothiazine derivatives leads to the formation of short lived free radicals which are able to reduce stable nitroxide free radicals generally used as spin labels. The measurement of the electron spin resonance signal decay of nitroxides offers a tool for studying the photochemical reaction of phenothiazine derivatives in solution at room temperature, in a 10^-5 to 10^-2 M concentration range. Analysis of the reaction mechanism shows that the paramagnetic nitroxide is an efficient quencher of the phenothiazine triplet state; this reaction was used to demonstrate the influence of the solvent, quenching by oxygen and the role of the chemical structure of six phenothiazine derivatives on their photoreactivity in solution.     

Determination du plomb dans l'urine par spectrophotometrie d'absorption atomique

Lead is assayed in urine by atomic absorption spectrophotometry after separation by coprecipitation with a CaCO₃, HCl, (NH₄)₂HPO₄ solution at pH 9. Concentration of lead and removal of interfering substances are achieved simultaneously. Fresh or old urine samples acidified with HNO₃ and thymol can be used. Precipitation is quantitative. The precision of the method is ±0,004 ppm of lead.     

Molecular orbital calculations of iron(II) complexes of diimine ligands

Summary Molecular orbital calculations using-, the INDO method have been carried out fm the [FeL(CN)₄]² and [FeLH(CN)₄] complexes, as well as for the tree ligands, with L 2 × pyridine, 1,10-phenanthroline.2,2-bipyridyl. 2,2-rimidine, 2, 3,3-bipyridazine and 4.4-bipyrimidine. Calculations of residual charge at carbon atoms in the ligand rings. correlating with relative nucleophilicity of the compounds, corresponds with observed differences of rate of reaction of the complex [FeI;]² With nucleophiles.     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

The study and characterization of nucleosides by mass spectrometry—I: The mass spectra of pyrimidine 2,2′-anhydronucleosides and their derivatives

The mass spectra of 2,2′-anhydrouridine, 2,2′-anhydrothymidine and 2,2′-anhydro-4-thiouridine are reported. The acetyl, trifluoroacetyl, trityl, pivaloyl and trimethylsilyl ether derivatives were also studied. Deuterium labeling in acetyl and trimethylsilyl groups aided characterization of many ions in the spectra, as well as helping to clarify hydrogen migration processes. The anhydronucleosides and their derivatives are readily distinguished from natural nucleosides by the presence of an ion containing the base moiety plus the anhydro-ring plus one hydrogen atom from the rest of the molecule. As for natural nucleosides the [base + H]⁺ and [base + 2H]⁺ ions are usually prominent, but in contrast to natural nucleosides, ions characteristic of the sugar moiety do not retain the 2′-oxygen atom (i.e. the oxygen atom of the anhydro-ring). The mass spectra of deuterium labeled derivatives suggest a test for the presence of a 3′-O-acetyl function (the O-acetyl group is lost from the molecular ion much more readily from the 3′- than from the 5′-carbon atom). The trimethylsilyl derivatives showed evidence in their mass spectra for migration of trimethylsilyl groups in addition to hydrogen atoms.     

Crystallization of amorphous germanium films

Kinetics of isothermal crystallization has been studied in the temperature range from 375 to 525°C. The kinetic curves are obtained and the rate of isothermal transformation of amorphous films into crystalline ones has been determined. Using experimentally determined kinetic curves the stability diagram of the amorphous films has been plotted in the temperature range from 400 to 525°C. The value of effective activation energy has been defined.     

High‐pressure studies of the micro‐Raman spectra of iron cyanide complexes: Prussian blue (Fe4[Fe(CN)6]3), potassium ferricyanide (K3[Fe(CN)6]), and sodium nitroprusside (Na2[Fe(CN)5(NO)]·2H2O)

The pressure dependences of the peaks observed in the micro‐Raman spectra of Prussian blue (Fe₄[Fe(CN)₆]₃), potassium ferricyanide (K₃[Fe(CN)₆]), and sodium nitroprusside (Na₂[Fe(CN)₅(NO)]·2H₂O) have been measured up to 5.0 GPa. The vibrational modes of Prussian blue appearing at 201 and 365 cm⁻¹ show negative dν/dP values and Grüneisen parameters and are assigned to the transverse bending modes of the Fe C N Fe linkage which can contribute to a negative thermal expansion behavior. A phase transition occurring between 2.0 and 2.8 GPa in potassium ferricyanide is shown by changes in the spectral region 150–700 cm⁻¹. In the spectra of the nitroprusside ion, there are strong interactions between the FeN stretching mode and the FeNO bending and the axial CN stretching modes. The pressure dependence of the NO stretching vibration is positive, 5.6 cm⁻¹ GPa⁻¹, in contrast to the negative behavior in the iron(II)‐meso‐tetraphenyl porphyrinate complex. Copyright © 2011 John Wiley & Sons, Ltd.     

Determining the effective density of airborne nanoparticles using multiple charging correction in a tandem DMA/ELPI setup

The cysteamine-modified hyaluronic acid (HA) polymer was employed to coat quantum dots (QDs) through a convenient one-step reverse micelle method, with the final QDs hydrodynamic size of around 22.6 nm. The HA coating renders the QDs with very good stability in PBS for more than 140 days and resistant to large pH range of 2–12. Besides, the HA-coated QDs also show excellent fluorescence stability in BSA-containing cell culture medium. In addition, the cell culture assay indicates no significant cytotoxicity for MD-MB-231 breast cancer cells, and its targeting ability to cancer receptor CD44 has been demonstrated on two breast cancer cell lines. The targeting mechanism was further proved by the HA competition experiment. This work has established a new approach to help solve the stability and toxicity problems of QDs, and moreover render the QDs cancer targeting property. The current results indicate that the HA polymer-coated QDs hold the potential application for both in vitro and in vivo cancer imaging researches.     

Comparison between lattice Boltzmann method and Navier–Stokes high order schemes for computational aeroacoustics

Computational aeroacoustic (CAA) simulation requires accurate schemes to capture the dynamics of acoustic fluctuations, which are weak compared with aerodynamic ones. In this paper, two kinds of schemes are studied and compared: the classical approach based on high order schemes for Navier–Stokes-like equations and the lattice Boltzmann method. The reference macroscopic equations are the 3D isothermal and compressible Navier–Stokes equations. A Von Neumann analysis of these linearized equations is carried out to obtain exact plane wave solutions. Three physical modes are recovered and the corresponding theoretical dispersion relations are obtained. Then the same analysis is made on the space and time discretization of the Navier–Stokes equations with the classical high order schemes to quantify the influence of both space and time discretization on the exact solutions. Different orders of discretization are considered, with and without a uniform mean flow. Three different lattice Boltzmann models are then presented and studied with the Von Neumann analysis. The theoretical dispersion relations of these models are obtained and the error terms of the model are identified and studied. It is shown that the dispersion error in the lattice Boltzmann models is only due to the space and time discretization and that the continuous discrete velocity Boltzmann equation yield the same exact dispersion as the Navier–Stokes equations. Finally, dispersion and dissipation errors of the different kind of schemes are quantitatively compared. It is found that the lattice Boltzmann method is less dissipative than high order schemes and less dispersive than a second order scheme in space with a 3-step Runge–Kutta scheme in time. The number of floating point operations at a given error level associated with these two kinds of schemes are then compared.