Chalcogenide Exchange Reaction of [RGa(μ3-Te)]4 with Elemental Sulfur and Selenium: A Density Functional Theory Study

Thermodynamic and mechanistic features of the chalcogen exchange reaction between [RGa( ₃-Te)]₄ and elemental sulfur or selenium have been studied employing density functional theory (DFT) calculations using the BL3YP basis set and Stuttgart pseudopotentials. For [MeGa( ₃-E)]₄ (E=S, Se, Te) the correlation between the calculated parameters and diffraction data for their isolable analogs is greater than 98%. Each step of the conversion of [MeGa( ₃-Te)]₄ to [MeGa( ₃-E)]₄ via [Me₄Ga₄( ₃-Te)_4–x ( ₃-E) _x ] (E=S, Se) is predicted to occur as a series of isolated reactions. The entropy change for each chalcogen exchange is small in magnitude and corresponds to the degree of cage distortion within the cubane molecules. Calculations performed on [MeGa( ₃-Te)]₄...S₈ and [MeGa( ₃-Te)]₄-S suggest that an increase in electrophilicity of the gallium next to a surface bound tellurium may result in nucleophilic cage opening for which intermediate structures are calculated.     

Experimental and theoretical studies of the quenching of Li(3p,4p) by N2

Quenching mechanisms of the Li3p and Li4p states in collision with the nitrogen molecule are studied by laser-induced fluorescence spectroscopy and by a quantum chemical calculation. The Li3p state is observed to be efficiently quenched to the Li3s state detected as intense 3s-->2p emission. The Li4p state is efficiently quenched to the Li4s and Li3d states detected as 4s-2p and 3d-2p emissions, respectively. The potential-energy surfaces for the Li(2s-4p)N2 states show a large number of conical intersections and avoided crossings resulting from the couplings between the ionic [Li+(N2)-] and covalent configurations. There are a large number of stable excited states, and we give here the spectroscopic constants for the lowest two stable isomers correlating to Li2p+N2.     

Molecular orbital calculations of iron(II) complexes of diimine ligands

Summary Molecular orbital calculations using-, the INDO method have been carried out fm the [FeL(CN)₄]² and [FeLH(CN)₄] complexes, as well as for the tree ligands, with L 2 × pyridine, 1,10-phenanthroline.2,2-bipyridyl. 2,2-rimidine, 2, 3,3-bipyridazine and 4.4-bipyrimidine. Calculations of residual charge at carbon atoms in the ligand rings. correlating with relative nucleophilicity of the compounds, corresponds with observed differences of rate of reaction of the complex [FeI;]² With nucleophiles.     

The application of "click chemistry" for the decoration of 2(1H)-pyrazinone scaffold: generation of templates

The "click chemistry" approach has been explored on the 2-(1H)-pyrazinone scaffold for the generation of pharmacologically interesting heterocyclic moieties. Huisgen 1,3-dipolar cycloaddition has been evaluated as the key step for the construction of the 1,2,3-triazole ring at the C-3 position of 2-(1H)-pyrazinones. Two different pathways have been successfully evaluated: (1) via C-C or C-O linkage of the acetylenic part to the C-3 position of the 2-(1H)-pyrazinone scaffold or (2) via azide introduction in the C-3 position. The subsequent application of "click chemistry" resulted in the formation of hitherto unknown skeletons. Microwave irradiation has successfully been applied in different steps of the sequence.     

Countercurrent chromatographic isolation of lolitrem B from endophyte-infected ryegrass (Lolium perenne L.) seed

This paper describes a new method of purification of the Lolitrem B, a tremorgenic mycotoxin produced in planta by the endophytic fungus Neotyphodium lolii. The method is based on the large-scale isolation of the toxin by countercurrent chromatography (CCC). The lolitrem B content in endophyted ryegrass seed, 11 microg/g or 11 ppm, is extracted by stirring finely ground seeds with ethanol for 3 h at room temperature. The concentrated crude extract contains about 0.6 mg/g or 600 ppm of lolitrem B. It is then submitted to CCC purification with a biphasic four-solvent liquid system. A 160-fold enrichment was obtained in one step producing a raffinate containing 10% or 100 mg/g of the toxin. Further purifications were then performed by thin layer and low pressure liquid chromatography. Twenty-eight micrograms of lolitrem B with a 96% purity grade were obtained from 8 kg of seeds (yield 32%).     

Viscosity solutions of Isaacs' equations and differential games with Lipschitz controls

It is demonstrated that the upper and lower values of a two-person, zero-sum differential game solve the respective upper and lower Isaacs' equations in the viscosity sense (introduced by Crandall and Lions (Trans. Amer. Math. Soc. 277 (1983), 1–42). Since such solutions are unique, this yields a fairly simple proof that the game has value should the minimax condition hold. As a further application of viscosity techniques, a new and simpler proof that the upper and lower values can be approximated by the values of certain games with Lipschitz controls is given.     

Experimental analysis of floc size distributions in a 1-L jar under different hydrodynamics and physicochemical conditions

This study focuses on the relation among hydrodynamics, physicochemical conditions, and floc size. During ortho-kinetic flocculation, the floc size is controlled by a balance between hydrodynamic stress and aggregate strength. Special attention was paid to the influence of a hydrodynamic sequencing on both the aggregate strength and the flocculation processes. Experimental research was conducted in a 1-L jar for two different pH values. The hydrodynamic sequencing was made up of successive slow and rapid mixing periods, and different slow mixing intensities were studied. First, the large floc size was shown to decrease with increasing velocity gradient (G), with an expected trend (d proportional variant epsilon(-1/4)). Then, the aggregate strength was shown to depend on two main factors: the flocculation history and the physicochemical conditions, which control the cohesion forces between primary particles. Finally, flocculation processes are discussed in terms of aggregation and breakup phenomena, with relation to local hydrodynamics and physicochemical conditions.     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

Determination of niacin in infant formula by solid-phase extraction/liquid chromatography: peer-verified method performance-interlaboratory validation

This paper reports the results of the interlaboratory peer validation study of AOAC Peer-Verified Method (PVM) 1:2,000 for the determination of niacin in infant formula by solid-phase extraction/liquid chromatography. We have used a Data Quality Objectives (DQO) approach to address not only method variability and robustness but also accuracy of data through the use of an appropriate reference material in conjunction with the interlaboratory validation study. Our DQO included the following: (1) statistical agreement of analytical results and quantitative recovery between 2 collaborating laboratories; (2) the repeatability relative standard deviation (RSDr) values and the HORRAT (Horwitz ratio) obtained (1.07), which satisfied the criteria of the Horwitz "limits of acceptability" at the analyte level present; (3) validation of lack of interference; and (4) accuracy agreement within assigned values for a certified reference material. National Institute of Standards and Technology Standard Reference Material (NIST SRM) 1846 Infant Formula, with a certified value of 63.3 +/- 7.6 microg/g for niacin content, was used as a test material for collaborative study and accuracy assessment. Niacin values obtained by the originating laboratory were 59.7 +/- 4.0 microg/g (95% confidence interval [CI] = 1.4 microg/g with a relative standard deviation [RSD] of 6.7%) and by the peer laboratory were 56.6 +/- 6.6 microg/g (95% CI = 4.1 microg/g, with an RSD of 11.7%). Statistical evaluation using the means equivalence test showed that nicotinic acid values obtained by the peer laboratory were equivalent to those values obtained by the originating laboratory. Linear calibration curves and quantitative recovery were obtained. Integration of the PVM process with a readily available certified reference material gives the user confidence in the accuracy of the data generated by the method through traceability to the reference material used.     

Microchannel wall coatings for protein separations by capillary and chip electrophoresis

The necessity for microchannel wall coatings in capillary and chip-based electrophoretic analysis of biomolecules is well understood. The regulation or elimination of EOF and the prevention of analyte adsorption is essential for the rapid, efficient separation of proteins and DNA within microchannels. Microchannel wall coatings and other wall modifications are especially critical for protein separations, both in fused-silica capillaries, and in glass or polymeric microfluidic devices. In this review, we present a discussion of recent advances in microchannel wall coatings of three major classes--covalently linked polymeric coatings, physically adsorbed polymeric coatings, and small molecule additives. We also briefly review modifications useful for polymeric microfluidic devices. Within each category of wall coatings, we discuss those used to eliminate EOF, to tune EOF, to prevent analyte adsorption, or to perform multiple functions. The knowledgeable application of the most promising recent developments in this area will allow for the separation of complex protein mixtures and for the development of novel microchannel wall modifications.