基于Geant 4的介质深层充电电场计算

基于Geant4模拟了电子在Teflon介质中的电荷输运过程,获得了其内部的电流密度、剂量率和电荷沉积量沿深度的分布曲线,进而利用电荷连续性方程、泊松方程和深层俘获方程求解出Teflon中高能量、小束流电子辐照下的电场分布. 将介质平板充电过程简化为屏蔽铝板与分层介质组成的Geant4模型,电子源为1.0MeV,0.1pA/cm²的平面源. 通过记录经过各层介质的电子电量和各层介质内沉积能量和电子数目,用统计平均的方法获得了介质内电流密度、剂量率和电荷沉积量沿深度的分布规律. 介质内 关键词： 卫星 介质深层充电 Geant4 电场     

p型掺杂1.3μm InAs/GaAs量子点激光器的最大模式增益特性的研究

对p型掺杂13 μm InAs/GaAs量子点激光器的最大模式增益进行了实验和理论分析.实验上,测量了不同腔长激光器阈值电流密度与总损耗的对应关系,拟合出的最大模式增益为175 cm^-1,与相同结构非掺杂量子点激光器的最大模式增益一致.同时理论分析表明,p型掺杂对InAs/GaAs量子点激光器的最大模式增益并无影响,并且最大模式增益的计算结果与实验值相符.具有较小高度或高宽比的量子点能达到更高的最大模式增益,而较高的最大模式增益对p型掺杂13 μm InAs/GaAs自组织量子点激光器在光通信系统中的应用具有重要意义. 关键词： 最大模式增益 p型掺杂 InAs/GaAs量子点激光器     

Soliton propagation optimization and dynamic modulation in photonic crystal waveguide with polystyrene background

Bright optical soliton propagation properties near the left band edge of photonic crystal waveguide (PCW) are numerically investigated. Compared with the normal PCW with air background, by employing polystyrene as PCW background and adjusting the structure parameters simultaneously, the required soliton peak power sharply decreases from 8.63 × 10⁶ W/m to 9.98 × 10² W/m. The influence of optical loss on soliton propagation is numerically investigated. The dynamic modulation of the soliton propagation in PCW is realized, and a modulation range of 459 nm wavelength for the soliton transmission has been achieved. Simulation results show that the transmission wavelength, required soliton peak power and delay time decrease almost linearly as the external modulated voltage increases; the modulation sensitivities are 8.316 nm/V, 3.416 W/m/V and 16.6 ps/V, respectively.     

High-bandwidth and low-loss photonic crystal power-splitter with parallel output based on the integration of Y-junction and waveguide bends

A 1×2 power-splitter with parallel output that exhibits high-bandwidth and low-loss splitting for TE-polarized light is designed based on a photonic crystal slab in a silicon-on-insulator (SOI) material. The high performance is achieved by the integration of a Y-junction and 60° waveguide bends, which is designed to ensure single-mode operation, and keep the output channels of the power-splitter be parallel to the input channel. With a three-dimensional finite-difference time-domain (3D-FDTD) technique, ultralow-loss output of the optimized power-splitter with normalized transmission above 45% (in the range 3.216±0.18 dB) is obtained in the high-bandwidth range 1472–1634 nm, which covers the entire C-band of optical communication. In addition, the simulation results demonstrate that when the manufacture error of the lattice shift (dx) is in the range of ±10 nm, the disturbance of the transmission and the bandwidth are 1.52% and 6.79%, respectively. Both the specific result and the general idea of integration design are promising in the optical integrated circuit (OIC) and integrated optical devices in the future.     

Study on the relations of sensitivity with energy properties for HMX and HMX-based PBXs by molecular dynamics simulation

Molecular dynamics simulation was applied to study the structure and energy properties of β-HMX (β-cyclotetramethylene tetranitramine) crystal and its composite PBXs (polymer-bonded explosives) with F₂₃₁₁ as a polymer binder under different temperatures and F₂₃₁₁ concentrations. The interface interaction energy of HMX and F₂₃₁₁, the interaction energy E_N–N between N atoms in N–NO₂ trigger bond in HMX molecules, and the cohesive energy density (CED) are presented and analyzed. A meaningful finding is that there exists correlation between E_N–N and the sensitivity of β-HMX and its composites, i.e. the less the E_N–N is, the larger the sensitivity is. Additionally, molecular interactions are inherently disclosed by using pair correlation function (PCF) to analyze the interfacial structure between (1 0 0)HMX crystal surface and F₂₃₁₁ molecular chain.     

Influence of switchable magnetic field on the modulation property of nanostructured magnetic fluids

Magnetic fluid is a kind of colloidal material with tunable microstructure and unique optical properties. The tunable magneto-optical modulation property of magnetic fluid under externally switchable magnetic field with various modulation periods is investigated theoretically and experimentally. The transitional modulation period (lower limit of the working frequency) between the square-like and oscillation-like modulation is achieved and found to be magnetic-field- and sample-concentration-dependent. The modulation mechanism is analyzed and ascribed to the dynamic microstructure of magnetic fluid under different modulation periods of external magnetic fields. The result of this work may be helpful for the pragmatic applications of magnetic fluid based on the square-like modulation.     

Analysis of spectral properties of acoustic noise produced during magnetic resonance imaging

Magnetic resonance imaging (MRI) technique enables non-invasive analysis of the human vocal tract during phonation. Creation of MR images of the vocal tract is accompanied by simultaneous recording of the produced speech. The paper analyzes and compares spectral properties of an acoustical noise produced by mechanical vibration of the gradient coils during scanning in the open-air MRI equipment working in a weak magnetic field with low B₀ up to 0.2 T. This noise exhibits harmonic character, so it is suitable to analyze its properties in the spectral domain. Obtained results of spectral analysis will be used to devise a new cepstral-based filtering method for noise suppression of recorded speech.     

点缺陷对硼掺杂直拉硅单晶p/p~+外延片中铜沉淀的影响

系统研究了点缺陷对晶体硅中氧沉淀生成的影响,及点缺陷和氧沉淀对重掺硼直拉硅单晶p/p⁺外延片中铜沉淀的影响.样品先在不同的气氛下进行1250℃/60 s快速热处理,随后在750℃/8 h+1050℃/16 h常规热处理过程中引入铜沾污.通过腐蚀结合光学显微镜研究发现,以O₂作为保护气氛时,p⁺衬底中的沉淀密度较小,以Ar和N₂作为保护气氛时,重掺硼p⁺衬底中生成了高密度的沉淀,且在上述所有样品的外延层中均无缺陷生成.研究认为,以O₂作为保护气时引入的自间隙硅原子（Si_I）可以抑制沉淀的形成,而以Ar和N₂作为保护气氛时引入的空位则会促进沉淀的生成,这是导致此差异的主要原因.另外,研究还发现,p/p⁺外延结构能很好地吸除硅片中的铜杂质,从而保持了外延层的洁净.     

Controlled decoherence of three-level rf-SQUID qubit with asymmetric potential

A scheme is proposed to controll the decoherence of three-level rf-SQUID qubit with asymmetric potential by designing an external electric circuit for superconductive flux qubit. The results show that it may not only raise the gate speed but also extend decoherence time for a three-level structure.     

Approximate solution for the Klein Gordon-Schrdinger equation by the homotopy analysis method

The Homotopy analysis method is applied to obtain the approximate solution of the Klein--Gordon--Schr?dinger equation. The Homotopy analysis solutions of the Klein--Gordon--Schr?dinger equation contain an auxiliary parameter which provides a convenient way to control the convergence region and rate of the series solutions. Through errors analysis and numerical simulation, we can see the approximate solution is very close to the exact solution.