Thermodynamics of complex formation in dimethyl sulfoxide with ligands coordinating via N,P, As,Sb, OR Bi : III. A comparison between aromatic and aliphatic amines and phosphines

The stabilities of the complexes formed by silver(I), cadmium(II) and zinc(II) with tri-n-butylamine and tri-n-butylphosphine have been determined in dimethyl sulfoxide (DMSO). For the two latter metal ions, it has also been found that complexes are not formed in appreciable amounts with the triphenyl compounds Ph₃X, X = N, P and, in the case of cadmium(II), also As.From these and earlier measurements referring to DMSO as well as aqueous solutions, it was found that the stepwise stability constants increase by roughly one power of ten for each aromatic ring replaced by an aliphatic group, evidently as a consequence of the improved donor properties of the coordinating atoms. Further, for ligands of the same type, the stabilities are always markedly lower in DMSO than in aqueous solution. This is certainly due to the fact that the solvent molecules compete more strongly for the coordination sites in DMSO than in water, as reflected by the larger heats of solvation found in the former solvent for the metal ions concerned.     

A theorem on asymptotic expansion of Feynman amplitudes

For any Feynman amplitude, where any subset of invariants and/or squared masses is scaled by a real parameter going to zero or infinity, the existence of an expansion in powers of and ln is proved, and a method is given for determining such an expansion. This is shown quite generally in euclidean metric, whatever the external momenta (exceptional or not) and the internal masses (vanishing or not) may be, and for some simple cases in minkowskian metric, assuming only finiteness of the — eventually renormalized — amplitude before scaling. The method uses what is called Multiple Mellin representation, the validity of which is related to a generalized power-counting theorem.On leave of absence from University of Bahia (Brazil). Fellow of CAPES, Brazil     

HCl-NaCl-C3H8O3-H2O体系溶液热力学性质

在恒定丙三醇质量分数x=0．1的条件下，测定了无液接电池（A）和电池（B）的电动势根据电池（A）电动势确定了丙三醇和水混合溶剂中的Ag－AgCl电极的标准电极电势，讨论了HCl的迁移性质；由电池（B）测得的电动势计算了HCl在该体系中的活度系数γA，计算的结果表明，对于所讨论的体系，在溶液中总离子强度保持恒定，HCl的活度系数服从Harned规则．在溶液组成恒定时，IgγA是温度倒数1／T的线性函数，讨论了混合物中HCl的相对偏摩尔焓及介质效应．     

An annulene-fused cyclopentadienide. A photochromic cyclopentadienodimethyldihydropyrene where the fused cyclopentadienide group resembles benzene in its effect on the dihydropyrene-metacyclophanediene valence isomerization

The synthesis of the green cyclopentadiene-fused dimethyldihydropyrene 12 was achieved in 36% yield in 7 steps from the parent dihydropyrene 3. Reaction of 12 with KH or LiCH(2)SiMe(3) gave the [14]annulene-fused cyclopentadienide anion quantitatively. In the (1)H NMR spectra, the internal methyl protons of 12 at delta -3.9, change dramatically on formation of anion 5, becoming deshielded to delta -1.82. This is caused by the reduction in diatropicity of the [14]annulene ring on fusion to the 6pi-cyclopentadienide ring. The anion is also a photochromic switch. Irradiation of the closed form 5 with visible light opens it to the open form 5', which reverts to the closed form 5 either with UV light or thermally. The switching behavior is between that of the parent 3/3' and the benzannelated system 4/4' and suggests that in its effect on the photoswitching, cyclopentadienide is behaving chemically similar to benzene.     

Effectiveness of antioxidants: Suppression of evolution of gaseous degradation products from low-density polyethylene during thermo-oxidation

The present investigation is part of a project concerning improvements of the working environment for polymer manufacturing processes at high temperatures; for example, welding and extrusion coating.The evolution of gaseous degradation products from unstabilized and antioxidant stabilized low-density polyethylene during thermo-oxidation in air at 210°C has been studied by a simple technique using a modified gas chromatograph. Of the thirteen antioxidants investigated (phenols, phosphites, phosphonites, sulphides and metal dithiocarbamates), only phenols (radical scavengers) effectively suppress the formation of gaseous degradation products from the polymer during an induction period.The gaseous degradation products were analysed with combined gas chromatography-mass spectrometry (GC-MS), using direct trapping on the GC column (Porapak® QS). Apart from water and carbon dioxide, the major products are formaldehyde, acetaldehyde, formic and acetic acids. The addition of effective antioxidants strongly reduces the absolute amounts of the degradation products during the induction period, but does not change their relative quantities.     

On non-analytic thermodynamic behaviour of the classical linear chain

The free energy ? per particle and the two-particle distribution function g have been expressed as functionals of the nearest-neighbour interaction Φ(x) for a variety of boundary conditions. For some boundary conditions and potentials Φ(x), ? and g behave singularly at a critical density

$\text{ρ}{}_{\mathrm{<mtext>c</mtext>}}\text{=}\text{lim}\text{s→0}{}^{\mathrm{+}}\text{∫}\text{0}\text{∞}\text{e}{}^{\mathrm{?sx?\beta \Phi (x)}}\text{d}\text{x?}\text{∫}\text{0}\text{∞}\text{x}\text{e}{}^{\mathrm{?sx?\beta \Phi (x)}}\text{d}\text{x.}$

     

The molecular structure of trans- and cis-bicyclo-[4.3.0]nonane in the gas phase,studied by electron diffraction and molecular mechanics

The structure and conformations of trans- and of cis-bicyclo[4.3.0]nonane have been studied in the gas phase. Molecular mechanics calculations applying the force field of Ermer and Lifson were used to obtain geometrical constraints, vibrational amplitudes and perpendicular vibrational corrections. The vibrational parameters were corrected for the large amplitude motion of the five-membered ring. The refinement for the trans-isomer confirms completely the predictions of the force field calculations. Although a stable solution could not be obtained for the cis-compound there is no contradiction between experiment and model calculations. The cyclohexane ring in both isomers is found to have a distorted chair conformation. In the cis-isomer it is flattened along the junction and more twisted in the other part. For the trans-compound the reverse is true.The following structural parameters r_g, r_α-structure) are put forward, (a) trans-compound: C₂-symmetry, _r(C-C)_av = 1.536 Å. Average bond angle and average torsion angle in the cyclohexane ring are 110.2° and 58.1°, respectively. The connection angle, defined as the angle between the planes bisecting C6-C1-C5-C9 and C2-C1-C5-C4, is 180°. (b) cis-compound: no symmetry, r(C-C)_av = 1.536 Å. Average bond and torsion angles in the cyclohexane ring are 112.2° and 52.3°, respectively. The connection angle is 124.8°.A comparison is made with structures of related compounds.     

Melanin offers protection against induction of cyclobutane pyrimidine dimers and 6-4 photoproducts by UVB in cultured human melanocytes

The goal of this investigation was to correlate the melanin content in human pigmentary cells with the generation of UVB-induced photoproducts and to examine the relationship between the melanin content and the removal of the photoproducts. Cultured melanocytes from light-skinned individuals synthesized less melanin and produced more cyclobutane pyrimidine dimers and 6-4 photoproducts upon UVB exposure than did melanocytes from black skin. Tyrosine-stimulated melanogenesis provided protection against DNA damage in both cell types. In another set of pigmented cell lines a ratio between eumelanin and pheomelanin was determined. The assessment of association between DNA damage induction and the quantity and quality of melanin revealed that eumelanin concentration correlated better with DNA protection than pheomelanin. Skin type-I and skin type-VI melanocytes, congenital nevus (CN)-derived cells and skin type-II melanocytes from a multiple-melanoma patient were grown in media with low or high L-tyrosine concentration. The cells were irradiated with 200 J/m2 UVB, and the levels of the photoproducts were determined immediately and after 6 and 24 h. Once again the induction of the photoproducts was mitigated by increased melanogenesis, and it was inversely correlated with the skin type. No significant differences were found for the removal of photoproducts in the cultures of skin types I and VI and CN cells. No indications of a delay in the removal of photoproducts in the melanocytes from the multiple-melanoma patient were found either.     

Controlling cell attachment selectively onto biological polymer-colloid templates using polymer-on-polymer stamping

A new patterning approach using polymer-on-polymer stamping (POPS) has been developed to fabricate polymer-colloid templates for controlling selective cell attachment. In this paper, a polyamine surface patterned onto a poly(acrylic acid)/poly(allylamine hydrochloride) (PAA/PAH) cell resistant multilayer platform serves as a template for the deposition of close- or loose-packed colloidal particles. Peptides containing the RGD adhesion sequence were used to modify the PAH/colloid surface for specific cell attachment. Cell behavior was studied by varying colloidal packing array density, pattern geometry, and surface chemistry. It was found that loose-packed RGD-modified colloidal arrays enhance cell adhesion, as observed through the development of focal adhesion contacts and orientation of actin stress fibers, but close-packed colloidal arrays induce a rounded and nonadhesive cell morphology and yield a smaller number of attached cells. On loose-packed arrays, cells adjust their shapes to the pattern geometry when the stripe width is smaller than 50 microm and increase their extent of attachment when the concentration of surface RGD peptides is increased. This new biomaterials system allows the examination of cell behavior as a function of RGD surface distribution on the molecular to micrometer scale and reveals cellular response to different surface roughnesses.     

Recovering a frame from its sheaves of algebras

Let

be a frame, α an element of

and T a finitary algebraic theory. In this paper we compare the category

of sheaves of T-algebras on

with the category Sh(α↓,T) of sheaves of T-algebras on α↓ (where α↓ is the initial segment {β|β<α}). This comparison suggests the definition of formal initial segments of the category

. For a large class of theories to be called ‘integral’ (examples of which are sets, monoids, groups, rings, modules on a integral domain, boolean algebras,hellip;) the formal initial segments of

coincide with the usual initial segments of

: this means that we are able to recover

axiomatically from

.When

is the initial frame {0, 1}, the frame of formal initial segments of

is the frame of open subsets of a compact space Spec T, called the spectrum of the theory T. When T is the theory of modules on some ring R, we recover in this way various well known notions of spectra and their corresponding sheaf-representation of the ring.