Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

Water concentration profiles in membranes measured by ESEEM of spin-labeled lipids

Electron spin-echo envelope modulation (ESEEM) spectroscopy of phospholipids spin-labeled systematically down the sn-2 chain was used to detect the penetration of water (D2O) into bilayer membranes of dipalmitoyl phosphatidylcholine with and without 50 mol % cholesterol. Three-pulse stimulated echoes allow the resolution of two superimposed 2H-ESEEM spectral components of different widths, for spin labels located in the upper part of the lipid chains. Quantum chemical calculations (DFT) and ESEEM simulations assign the broad spectral component to one or two D2O molecules that are directly hydrogen bonded to the N-O group of the spin label. Classical ESEEM simulations establish that the narrow spectral component arises from nonbonded water (D2O) molecules that are free in the hydrocarbon chain region of the bilayer membrane. The amplitudes of the broad 2H-ESEEM spectral component correlate directly with those of the narrow component for spin labels at different positions down the lipid chain, reflecting the local H-bonding equilibria. The D2O-ESEEM amplitudes decrease with position down the chain toward the bilayer center, displaying a sigmoidal dependence on position that is characteristic of transmembrane polarity profiles established by other less direct spin-labeling methods. The midpoint of the sigmoidal profile is shifted toward the membrane center for membranes without cholesterol, relative to those with cholesterol, and the D2O-ESEEM amplitude in the outer regions of the chain is greater in the presence of cholesterol than in its absence. For both membrane types, the D2O amplitude is almost vanishingly small at the bilayer center. The water-penetration profiles reverse correlate with the lipid-chain packing density, as reflected by 1H-ESEEM intensities from protons of the membrane matrix. An analysis of the H-bonding equilibria provides essential information on the binding of water molecules to H-bond acceptors within the hydrophobic interior of membranes. For membranes containing cholesterol, approximately 40% of the nitroxides in the region adjacent to the lipid headgroups are H bonded to water, of which ca. 15% are doubly H bonded. Corresponding H-bonded populations in membranes without cholesterol are ca. 20%, of which ca. 6% are doubly bonded.     

Isotope dilution determination of polycyclic aromatic hydrocarbons in olive pomace oil by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometry detection (MS) for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in olive pomace oil has been developed. The oil was diluted with n-pentane and extracted by liquid-liquid partition with dimethyl sulphoxide (DMSO). After water addition and back-extraction with cyclohexane, a thin-layer chromatography on silica gel was performed as a further purification step. The PAHs spot was scraped off from the plate and the final extract was concentrated and analysed by GC-MS in full scan mode. The eight PAHs under investigation were determined in the presence of the corresponding labelled compounds added as internal standards to the sample at the beginning of the analytical process. The identified PAHs were then quantified by the isotope dilution methodology assuring the compensation of the concentration of each analyte for any variation in the sample preparation. The method precision was satisfactory with relative standard deviation (R.S.D.) values in the range 3.6-12.7% for all PAHs. The average recovery rates ranged from 69.0 to 97.5%. Accuracy was also calculated for benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene by analysing a certified reference material (CRM 458, coconut oil) with adequate results. All response curves exhibited a linear fit from 0.1 to 10 microg ml(-1) and the determination coefficients R2 were better than 0.9942. The limits of detection (0.1-0.4 microg kg(-1)) were acceptable when compared with the maximum permitted limit of 2 microg kg(-1) for each of the eight considered PAHs and 5 microg kg(-1) for the sum of the eight PAHs established by the Italian legislation. Measurement uncertainty was finally calculated identifying and quantifying the uncertainty components of the analytical process. The relative expanded uncertainties (Uc), expressed as percent values were in the range 8.5-11.4% thus appropriate for residues quantification in the range of concentrations considered in the present study.     

Novel selenium-containing non-natural diamino acids

The general synthesis of a new class of non-natural diamino acids, 2-amino-3-[(2′-aminoalkyl)seleno]propanoic acids, or Se-(aminoalkyl)selenocysteines, is reported. Under the conditions devised, enantiopure N-Boc-protected β-l-iodoamines, which are readily generated from proteinogenic α-amino acids, were treated with the selenolate anion obtained from NaBH₄ splitting of the Se-Se bond in commercial l-selenocystine. The Se-alkylation products were enantiomerically pure and the reaction is high yielding (92-98%), without any detectable traces of accompanying by-products.     

Use of 1,3-dibenzyl-dihydrouracil in the chain extension of 2,3-O-isopropylidene-d-glyceraldehyde

The aldol-type addition of 1,3-dibenzyl-dihydrouracil 2 to 2,3-O-isopropylidene-d-glyceraldehyde 3 was examined in different solvents and under Lewis acid catalysis in order to establish the stereochemical preferences. A stereodivergent synthesis of 5-trihydroxypropyl-dihydrouracil derivatives 4 and its C-5 epimer 5 was realized. The synthesis of ureido polyols 8 and 10 was obtained via the reductive ring opening of the templates 4 and 5.     

Matrix removal for the ion chromatographic determination of some trace elements in milk

An ion chromatographic method has been developed for the determination of some microelements in different types of milk. It involves oxidative photodegradation of the organic matrix with H₂O₂ in a UV digester, equipped with a high-pressure mercury lamp. The temperature of the sample is maintained at 85±5 °C by a combined air/water cooling system. This procedure provides an efficient alternative to traditional dry ashing and wet digestion methods. Milk degrades in less than 2 h, while inorganic constituents, except for iodide, nitrate, nitrite, sulfite and manganese (II), are unaffected by UV radiation. Depending upon the type of milk (whole, skimmed, powdered, evaporated, etc.) to be analysed, the amount of sample and the UV photolysis time can be adjusted as per requirements. The clear solution resulting from the UV digestion is diluted, filtered and injected onto an ion chromatograph equipped with both conductivity and variable-wavelength UV-Vis detectors. The method has been tested with standards and real milk samples and has been found to be satisfactory for the determination of total chloride, bromide, phosphorus (as phosphate) and sulfur (as sulfate), and of copper, nickel, zinc, cobalt, iron and lead.     

TBAF-catalyzed synthesis of 5-substituted 1H-tetrazoles under solventless conditions

Tetrabutylammonium fluoride (TBAF) is an efficient catalyst in the [3 + 2] cycloaddition reaction of organic nitriles 1 with trimethylsilyl azide (TMSN(3)) in solventless conditions. The corresponding 5-substituted 1H-tetrazoles 2 were obtained under mild conditions and in 80-97% yields.     

Nitrite increases the enantioselectivity of sulfoxidation catalyzed by myoglobin derivatives in the presence of hydrogen peroxide

The effect of nitrite in the sulfoxidation of organic sulfides catalyzed by myoglobin (Mb) in the presence of hydrogen peroxide has been investigated. A general improvement in enantioselectivity was found for the reaction catalyzed by horse heart metMb and a series of sperm whale metMb derivatives including the wild type protein, the active site mutants T67K Mb, T67R Mb, T67R/S92D Mb, and the T67K Mb derivative reconstituted with the modified prosthetic group protohemin-l- histidine methyl ester.     

Review of aminopolycarboxylic acids–based metal complexes application to water and wastewater treatment by (photo-)Fenton process at neutral pH

1. Download : Download high-res image (162KB)
2. Download : Download full-size image

     

A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.