The reaction of carbanions from 3-methyl-5-phenylisoxazole with electrophilic compounds

The reactivity of 3-methyl-5-phenylisoxazole against electrophilic compounds in the presence of different bases is studied. With n-BuLi, alkylated products at C-4 position and C-3 methyl group, and, in a few cases, dialkylated isoxazoles are obtained. When the reactions are carried out with LICA, the nature of the alkylated products depends on the alkyl halide used. By using LICA-TMEDA, as deprotonating system, regio-selective reaction at the C-3 methyl group is found.     

Headspace solid-phase microextraction-gas chromatography-mass spectrometry applied to quality control in multilayer-packaging manufacture

A method based on headspace solid-phase microextraction-gas chromatography-mass spectrometry is proposed for the quality control of multilayer packaging and its manufacturing process. Volatile organic compounds (VOCs) are produced in the manufacturing process of the packaging. They can cause organoleptic problems or modify the properties of the packaging depending on the nature and the amount of the VOCs formed. The quantification using packaging samples with a known VOC concentration for the calibration is proposed in order to reduce the analysis time, and the method is validated using a statistical test. Finally, the method is applied to the determination of odour-responsible compounds in multilayer packaging samples obtained under different extrusion-coating conditions, i.e. type of extruder, type of polymer and extrusion speed.     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part III. Alkylbenzenes as the test analytes

Direct determination of thermodynamic data has always been a complicated and troublesome experimental task. Gas chromatography is among long-established working tools well suited to performing this particular task indirectly. Our own results were first presented in the papers by Ciazynska-Halarewicz and Kowalska (1,2), and this article is Part III in the series. Present experiments are carried out on low- and medium-polarity stationary phases at five different temperatures ranging from 323K to 423K. They enable determination of two thermodynamic properties of the alkylbenzenes, molar enthalpy of vaporization (DeltaH(vap)), and the chemical potential of partitioning of the methylene group between the two phases of the chromatographic system (Delta micro (p(-CH2-))). These properties are obtained from eight nonempirical models and, as is apparent from their derivation (3-7), the terms of the models have clearly defined physical meaning, which enables calculation of thermodynamic properties.     

Amino-Modified Silicate Xerogels Complexed with Cu(II) as Catalyst Precursors. Coordination State and Thermal Decomposition

The sol-gel process is a useful method for preparing two series of organically and co-ordinately modified xerogels of the types [CuN _n ]·N _5–n ·5xSiO_4/2 (n < 4) and [Cu(N–N)_n]·(N–N)_2–n ·2x SiO_4/2(n 2), where N = NH₂(CH₂)₃ SiO_3/2, N–N = NH₂(CH₂)₂NH·(CH₂)₃SiO_3/2 and x = [SiO_4/2]/[N] or [SiO_4/2]/[N–N]. The amino groups in the materials are coordinately active and participate partly in the coordination sphere of Cu(II) ions. The composition of the coordination sphere can be varied with the SiO_4/2 content and also as a result of the thermal decomposition of the organic residues at higher temperatures.Because the xerogel materials are considered to be catalyst precursors, this study is focused on their coordination and thermal properties. The prepared xerogels, such as silica, aminated silicates with N and N–N, as well as those entities complexed with Cu(II), were characterised by FT-IR spectroscopy. During gelation and thermal decomposition the materials were analysed by electron paramagnetic resonance (EPR) spectroscopy. The xerogels were additionally studied by UV-Vis absorption spectroscopy. The gaseous products of the thermal decomposition of these materials in an Ar atmosphere were investigated by the use of FT-IR spectroscopy coupled with TG and DTG thermal analysis. These data were complemented by temperature-programmed decomposition (TPDec) in a 2% O₂ + 98% Ar stream coupled with quadrupole mass spectroscopy.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Density and Sound Velocity Studies of Aqueous Solutions of Tetradecyltrimethylammonium Nitrate at Different Temperatures

The density and ultrasound velocity of aqueous solutions of tetradecyltrimethylammonium nitrate were measured in the temperature range of 15 to 35°C in 5°C intervals. The concentration range covered the premicellar and micellar regimes. By assuming a pseudophase separation model for the micellar system, we applied the densitometric data to estimate the apparent molar volumes and the apparent thermal expansibility coefficients of the surfactant in monomeric and micellar forms. Ultrasound velocity and density data enabled us to estimate the isentropic compressibility of the surfactant in both forms. The results are compared with relevant literature data for alkyltrimethylammonium bromides.     

Determination of “solvent” concentration in “chromatographic solutions” on the cellulose sorbents

An attempt was undertaken to furnish an entirely quantitative characteristics to the thermodynamic model of the chromatographic system presented in (2). The attempt proved to be successful and one managed to establish simultaneously a new method enabling direct determination of the hydrogen-bond enthalpy from the PC experimental results.     

Structural characterization of CeO(2)-ZrO(2)/TiO(2) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) mixed oxide catalysts by XRD, Raman spectroscopy, HREM, and other techniques

Structural characteristics of CeO(2)-ZrO(2)/TiO(2) (CZ/T) and V(2)O(5)/CeO(2)-ZrO(2)/TiO(2) (V/CZ/T) mixed oxide catalysts have been investigated using X-ray diffraction (XRD), BET surface area, Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques. The CeO(2)-ZrO(2) (1:1 mole ratio) solid solution was deposited over a finely powdered TiO(2) support by a deposition precipitation method. A nominal 5 wt % V(2)O(5) was impregnated over the calcined (773 K) CZ/T mixed oxide carrier by a wet impregnation technique. The obtained CZ/T and V/CZ/T samples were further subjected to thermal treatments from 773 to 1073 K to understand the dispersion and temperature stability of these materials. In the case of CZ/T samples, the XRD results suggest the formation of different cubic and tetragonal Ce-Zr-oxide phases, Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), Ce(0.5)Zr(0.5)O(2), and Ce(0.16)Zr(0.84)O(2) in varying proportions depending on the treatment temperature. With increasing calcination temperature from 773 to 1073 K, the intensity of the lines pertaining to cubic Ce(0.6)Zr(0.4)O(2) and Ce(0.5)Zr(0.5)O(2) phases increased at the expense of cubic Ce(0.75)Zr(0.25)O(2), indicating more incorporation of zirconia into the ceria lattice. The TiO(2) was mainly in the anatase form whose crystallite size also increased with increasing treatment temperature. A better crystallization and more incorporation of zirconia into the ceria lattice was noted when CZ/T was impregnated with V(2)O(5). However, no crystalline V(2)O(5) could be seen from both XRD and RS measurements. In particular, a preferential formation of CeVO(4) compound and an intense tetragonal Ce(0.16)Zr(0.84)O(2) phase were noted beyond 873 K. The HREM results indicate, in the case of CZ/T samples, a well-dispersed Ce-Zr-oxide of the size approximately 5 nm over the bigger crystals ( approximately 40 nm) of TiO(2) when treated at 873 K. The exact structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic fluorite geometry and the TiO(2) is in anatase form. A better crystallization of Ce-Zr-oxides ( approximately 8 nm) over the surface of bigger crystals of TiO(2) was noted at 1073 K. A further enhancement in the crystallite size and zirconia-rich tetragonal phase was noted in the case of V/CZ/T samples. Further, the structure of CeVO(4) formed was also clearly identified in conformity with XRD and RS results.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.