Comparison of four quantification methods for the determination of PCB in transformer oils

The analysis of PCB in transformer oils has been achieved with three HRGC/ECD based methods, proposed by the International Electrotechnical Commission (IEC/TC 10), by the Comité Européen de Normalisation (CEN/TC 19/WG 22) and by the Deutsches Institut für Normung (DIN 51 527). The same clean-up, described in the CEN/TC 19/WG 22, has been used for all the samples, allowing a comparison of the quantification procedure only. The total chlorine content has also been determined with X-ray fluorescence. These different methods of quantification are compared and their application for legislative purposes is discussed.Dedicated to Professor Dr Dieter Klockow on the occasion of his 60th birthday     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Upward and downward heat and mass transfer with miniature periodically operating loop thermosyphons

Upward and downward two-phase heat and mass transfer has been considered in the present paper. The heat and mass transfer with the condenser located below the evaporator has been obtained by inserting an accumulator tank in the liquid line of a loop thermosyphon and enforcing a pressure pulsation. In previous papers these heat transfer devices have been called pulsated two phase thermosyphons (PTPT). A mini PTPT has been experimentally investigated. It has shown a stable periodic heat transfer regime weakly influenced by the position of the condenser with respect to the evaporator. In contrast a classical loop mini thermosyphon (diameter of connecting pipes 4 mm) did not achieve a stable functioning for the investigated level differences between evaporator and condenser lower than 0.37 m. The present study shows that the functioning of a PTPT device does not directly depend on the level difference or the presence of noncondensable gas. In order to obtain a natural circulation in mini or micro loops, a periodically operating heat transfer regime should therefore be considered.     

Principles and recent developments in ultrasound contrast agents

The behaviour of gas bubbles and gas encapsulated spheres as echographic contrast agents is reviewed. Compared with rigid spheres, gas bubbles are superior scattering agents and they offer a number of useful properties which can be exploited in a variety of ways. The analysis of their velocity of sound, back-scatter intensity, second harmonic emission and resonant frequency opens up new perspectives in the development of contrast agents for echocardiographic research with potential clinical applications.     

Averaged topological equations for dispersed two-phase flows

A general relationship between the volume fraction and the specific interfacial area for averaged dispersed two-phase flows is proposed. This relationship, expressed as a basic set of two scalar evolution equations and two vectorial non-uniformity state equations, is an analytical result obtained by a systematic approach using the derivatives of some generalized functions and a local volume-averaging technique. The proposed set of equations was expressed for measurable macroscopic parameters of the system and has the same generality as the averaged transport equations of two-phase flows. By combination of the basic set of equations, called the averaged topological equations (ATEs), second-order ATEs for the volume fraction were found. The second-order ATEs were expressed both by a Lagrangian formulation and by a Eulerian formulation. The importance and physical meaning of the ATEs developed in this study were clarified within the framework of the theory of kinematic waves.     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

Influence of heat treatment conditions on the porosity changes of sulfonated styrene/divinylbenzene copolymers

Sulfonic cation exchangers with two ion exchange group concentrations (0.5 and 2.4 mmol/g, samples A and B, respectively) were obtained by sulfonation of a porous styrene (S) and divinylbenzene (DVB) copolymer with chlorosulfonic acid. Strong thermal decomposition of the sulfonated copolymer A, accompanied by significant changes in its porous structure, starts at ca. 400°C. The char has no sulfonic groups. After heat treatment at 400°C in steam, a sorbent was obtained (yield 65%) that shows higher phenol sorption than the untreated sample when related to the bed volume. The chlorosulfonic derivatives of the initial copolymer were less thermally resistant than the sulfonic ones obtained by hydrolysis. Pyrolysis of the cation exchanger B, in its H+ and Ca²⁺ forms, was carried out at 900°C (yield of both chars close to 30%). By subsequent steam activation at 800°C to a 50% burn-off of the char, sorbents with well-developed, but distinctly different, porous structures were obtained. The activated char from the sulfonated copolymer in its hydrogen form was highly microporous and indicated an effective surface area of 1180 m²/g. However, because of a low contribution of mesopores, its ability to adsorb phenol from the liquid phase was not very high. The activated char from the calcium-doped copolymer, indicating a smaller surface area (580 m²/g) but characterized by a well-developed mesoporosity, was a better sorbent for phenol. © 1994 John Wiley & Sons, Inc.