“NMR invisible” aluminum species in dealuminated mordenite zeolite: a1H/27 AI TRAPDOR NMR study

Various kinds of aluminum species in dealuminated mordenite were investigated in detail, and the quadrupole coupling constants (QCCs) for aluminum atoms associated with these species were obtained by means of the newly introduced¹H/²⁷ AI TRAPWR method as well as²⁷Al magic angle spinning (MAS) nuclear magnetic resonance (NMR). QCC values of 11.3, 15.3, 13.3 and (14.0± 0.6) MHz were determined from the TRAPDOR profiles for Lewis acid sites, Bronsted acid sites (SiOHAl) and two kinds of non-framework aluminum species Al(OH) _n , respectively. The source of the “invisible Al” is discussed on the basis of the NMR experimental results.     

Intramolecular cyclization of 5-aryl-3-arylamino-4-benzoyl-1h-3-pyrrolin-2-ones to pyrrolo[3,4-<Emphasis Type="Italic">b</Emphasis>]quinolines

It has been shown that 5-aryl-3-arylamino-4-benzoyl-1H-3-pyrrolin-2-ones cyclize in the presence of conc. H₂SO₄ to give pyrrolo[3,4-b]quinolines.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1543–1545, October, 2004.     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.     

Comparison of the fragility index of different eudragit polymers determined by activation enthalpies

The present study aimed to apply fragility index (m) of polymers in the determination of the optimal amount of plasticizer in polymer films. The fragility index of different Eudragit polymers (RS, RL, EPO) was assessed by differential scanning calorimerty (DSC), applying the Arrhenius connection (logq–1/T _g). The fragility of Eudragit EPO films proved to be the highest, while in the case of RS and RL, the increase of the alkyl-chain length caused the increase of fragility. Studying the effect of plasticizer (triethyl citrate, TEC) on the m value of Eudragit RL and RS films, a near linear reduction of the fragility index could be observed between 5–30% TEC concentration, but above 30%, this value leveled out to constant.     

Interfacial and micellar properties of binary mixtures of surfactant and phospholipid in an aqueous medium

Mixed micelles formed by zwitterionic surfactant dimethyldodecylammniopropane sulfonate and short-chain phospholipid 1,2-diheptanoyl-sn-glycero-3-phosphocholine in different proportions in an aqueous medium have been studied physicochemically at an air/water interface and in the bulk by using interfacial tension and pyrene fluorescence intensity measurements, respectively. The critical micellar concentration and free energies of micellization and of interfacial adsorption have been determined. The interfacial study reveals that a mixed monolayer is formed at the air/water interface by the adsorption of surfactant and phospholipid monomers. This has been confirmed by evaluating the interfacial parameters; the maximum surface excess, the minimum area per molecule of a surface-active compound, and the Gibbs surface excess related to surface pressure. The nonideality of mixing, expressed in the terms of the regular solution interaction parameter, #, has negative values over the whole mole fraction range. The negative # values indicate the mutual synergism between the surfactant and phospholipid monomers. The equilibrium distribution of components between micelle and monomer phases was evaluated using a theoretical treatment based on excess thermodynamics quantities evaluated by Motomura's formulation.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

Seasonal variation and activity size distribution of <Superscript>7</Superscript>Be in ambient air

The seasonal variation of the ⁷Be activities in air and the size distribution of the ⁷Be aerosols were studied by using a continuous air sampler and a five stage cascade impactor. The mean monthly activity level of ⁷Be at the Korea Atomic Energy Research Institute (KAERI) site varied from 0.5 to 4.8 Bq·m⁻³ and revealed a seasonal variation, in which the ⁷Be activity levels were high in winter and low in summer. The mass size distribution showed a bi-modal distribution with a higher peak around 0.49 μm and a smaller peak between 3 μm and 7.2 μm. The activity median aerodynamic diameter (AMAD) decreased with increasing ambient ⁷Be concentrations. The mean residence times by using a mean growth rate of 0.004 μm·h⁻¹ were estimated to be 2.5–6.4 days. The AMAD has an increasing tendency with higher relative humidity. It seemed that the high humidity condition facilitated the growth of the aerosol, resulting in increased deposition rates of the aerosols and the low ⁷Be content in the surface air. The AMAD of the ⁷Be aerosols increased with an increasing temperature, but the temperature dependency of AMAD should be explained with geological and meteorological conditions.     

A density functional theory study on boundary of “superreduced” transition metal carbonyl anions [M(CO)n](M=Cr, n=5, 4, 3, z=2, 4, 6; M=Mn, n=5, 4, 3, z=1, 3, 5; M=Fe, n=4, 3, 2, z=2, 4, 6; M=Co, n=4, 3, 2, z=1, 3, 5)

A nonlocal density functional theory (DFT) method has been applied to the calculations on optimized geometry, Mulliken atomic net charges and interatomic Mulliken bond orders as well as total bonding energies (E) in the binary transition metal carbonyl anions with different reduced states [M(CO)_n]^z− (M=Cr, n=5, 4, 3, z=2, 4, 6; M=Mn, n=5, 4, 3, z=1, 3, 5; M=Fe, n=4, 3, 2, z=2, 4, 6; M=Co, n=4, 3, 2, z=1, 3, 5). For comparison of relative stability, a relative stabilization energy D is defined as D=E([M(CO)_n]^z−)−nE(CO). The calculated C–O distances are lengthened monotonously with the increase of the anionic charge, but the M–C distances are significantly lengthened only in the higher reduced states. The relative stabilization energy calculated is a considerable negative value in the lower reduced states, but a larger positive value in the higher reduced states. The DFT calculations show that with the increase of the anionic charge, the Mulliken net charges on the M, C, and O atoms all increase, however, an excess of the anionic charge is mainly located at the central metal atom. The calculated C–O Mulliken bond orders decrease consistently with the increase of the anionic charge, but the M–C bond orders exhibit an irregular behavior. However, the total bond orders calculated clearly explain the higher reduced states to be considerably unstable. From analysis of the calculated results, it is deduced that the stability of the binary transition metal carbonyl anions [M(CO)_n]^z− studied are associated with the coordination number n and the anionic charge z, further, it is possible for the anions studied to be stable if n≥z, conversely, it is impossible when n<z.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.