Synthesis of zerovalent nanophase metal particles stabilized with poly(ethylene glycol)

Concurrent sonolysis of iron pentacarbonyl and poly(ethylene glycol)-400 (PEG-400) in hexadecane solvent proceeds via zero-order kinetics and results in Fe nanoparticles encapsulated in PEG-400 (Fe-PEG). The transmission electron microscopy images show Fe-PEG consisting of <3 nm Fe particles that are evenly dispersed in the PEG matrix. M?ssbauer and X-ray absorption fine structure/X-ray absorption near-edge structure data reveal an ordered PEG assembly that helps protect the zerovalent Fe core. The Fe nanoparticles in Fe-PEG are superparamagnetic with a magnetization value of 45 emu/g-Fe at 10 KOe. The rheology of the synthesized material shows an unusual increase in viscosity with temperature that is likely due to lower critical saturation temperature phase segregation over 40 degrees C. The low-temperature mobility of the PEG-400 moiety in Fe-PEG would allow facile ligation of the Fe0 core with biologically and chemically active groups.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

DC Electrical Study of Modified PMMA,PVC and their Blend

Summary: Thin films of high molecular weight PMMA, PVC and their blend were prepared with solution cast method. Further they were modified by adding Camphor Sulphonic Acid (CSA) to them. DSC studies indicate single glass transition temperature (Tg) for unmodified as well as modified blends indicating the miscibility of polymers. FTIR studies show the interaction between CSA-PVC, CSA-PMMA, CSA-(PVC+PMMA) blend. The D.C. electrical study was carried out at various temperatures from room temperature (307 K) to 373 K. After modification the variation of DC conductivity (σ) is found to decrease in PVC and the PVC-PMMA blend whereas it is found to increase in PMMA with rise in temperature.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Reproducible SERRS from structured gold surfaces

Metallic substrates with ordered spherical cavities have been shown to be very effective for surface-enhanced Raman scattering (SERS) and can be fabricated reproducibly using electrodeposition. The sensitivity of detection is increased by several orders of magnitude by using surface-enhanced resonance Raman scattering (SERRS). In this report we demonstrate SERRS for the first time on electrodeposited gold films templated with colloidal spheres and demonstrate the reproducibility of the response. We also obtain a direct comparison between SERRS and SERS by choosing two dyes, Cy5 and Cy3, which are similar in structure but differ in their excitation maxima, such that one is resonant and the other non-resonant with our laser excitation. As expected, the resonant enhancement is found to be of the order of 10(3) over and above that for SERS. The net SERRS enhancements are shown to be of the order of 10(9). We also find that the resonant enhancement profile of the different peaks for the chromophore follows the plasmonic resonance absorption spectrum obtained for the structured surface.     

SERS at structured palladium and platinum surfaces

Palladium and platinum are important catalytic metals, and it would be highly advantageous to be able to use surface enhanced Raman spectroscopy (SERS) to study reactive species and intermediates on their surfaces. In this paper we describe the use of templated electrodeposition through colloidal templates to produce thin (<1 microm) films of palladium and platinum containing close packed hexagonal arrays of uniform sphere segment voids. We show that, even though these films are not rough, when the appropriate film thickness and sphere diameter are employed these surfaces give stable, reproducible surface enhancements for Raman scattering from molecules adsorbed at the metal surface. We report SERS spectra for benzenethiol adsorbed on the structured palladium and platinum surfaces of different thicknesses and void diameters and show that, for 633 nm radiation, enhancements of 1800 and 550 can be obtained for palladium and platinum, respectively.     

The versatility of salicylaldehyde thiosemicarbazone in the determination of copper in blood using adsorptive stripping voltammetry

The adsorptive cathodic stripping voltammetry technique (AdCSV) is used to determine copper(II) using salicylaldehyde thiosemicarbazone (N, S- donor) as a complexing agent on hanging mercury drop electrode at pH 9.3. Variable factors affecting the response, i.e. the concentration of ligand, pH, adsorption potential and adsorption time are assessed and optimized. The adsorbed complex of copper(II) and salicylaldehyde thiosemicarbazone gives a well defined cathodic stripping peak current at −0.35 V, which has been used for the determination of copper in the concentration range of 7.85 × 10⁻⁹ to 8.00 × 10⁻⁶ M with accumulation time of 360 s at −0.1 V versus Ag/AgCl. This technique has been applied for the determination of copper in various digested samples of whole blood at trace levels.     

Electron transfer reactions. Reaction of tetracyclone,tetraphenylfuran and related substrates with potassium

The reaction of tetracyclone (1) with potassium in THF gave a mixture of benzoic acid (4), tetraphenylfuran (5) and cis-1,2-dibenzoylstilbene (6). The reaction of 1 with potassium in oxygen-saturated THF gave a mixture of 2-hydroxy-2,4,5-triphenyl-3(2H)furanone (3), 4, 5 and 6, whereas the reaction of 1 with potassium superoxide gave a moderate yield of 3,4,5,6-tetraphenyl-2-pyrartone (7), besides 3, 4, 5, and 6. The reaction of tetraphenylfuran (5) itself with potassium in THF gave a mixture of 6, 1,2,3,4-tetraphenylbutan-1-one (9), 2,3-diphenyl-1-indenone (10) and 2,3-epoxy-4-hydroxy-2,3,4-tnphenyltetralone-l (11), whereas practically no reaction occurred on treatment of 5 with potassium superoxide. Treatment of 10 with potassium in THF, however, gave a mixture of 4, dibenzo[a,c]-13-fluorenone (13), 2,3-diphenyl-2-hydroxyl-1-indanone (14) and 2,3-diphenylbenzofuran (15). A similar mixture of products consisting of 4, 13, 14 and 15 was obtained when the reaction of 10 with potassium was carried out in oxygen-saturated THF or when 10 was treated with potassium superoxide. Treatment of 2,3-diphenyl-2,3-epoxy-1-indanone (16) with potassium on the other hand, gave 10 in excellent yield. Cyclic voltammetric studies have been carried out to measure the reduction potentials of 1, 5, 10 and 16 in the generation of their radical anions. The radical anions of 1, 5, 10 and 16 were also generated pulse radiolytically in methanol and their spectra showed absorption maxima in the region 320–380 nm.     

Di(2-ethyl hexyl) butyramide and di(2-ethyl hexyl)isobutyramide as extractants for uranium(VI) and plutonium(IV)

The extraction of uranium(VI) and plutonium(IV) from nitric acid into n-dodecane was studied using two isomeric branched alkyl amides, di(2-ethyl hexyl) butyramide (DEHBA) and di(2-ethyl hexyl) isobutyramide (DEHIBA). The extraction ratios of Pu(IV) at relatively high acidities were higher than the corresponding values for U(VI) in the case of DEHBA. However, with DEHIBA the values for Pu(IV) were negligibly small. Pu(IV) was found to be extracted as trisolvate by DEHBA and as disolvate by DEHIBA. U(VI) was extracted by both the amides. From the study of the extraction reactions at different temperatures, it was shown that all the reactions in the present investigation were enthalpy favoured and entropy disfavoured. Separation of Pu(IV) from bulk of U(VI) was feasible. However, the purity of the separated plutonium was not satisfactory in batch extraction studies.