The energetics of ions,atoms, and salts: Sodium and its chloride

In this study we reconcile three seemingly contradictory assertions regarding sodium chloride. First, gaseous sodium chloride is Coulombically bound and highly ionic. Second, upon pulling the molecule apart atomic sodium and chlorine are produced. This is somewhat surprising; despite the high ionicity of NaCl, since IP(Na) > EA(Cl). Third, heterolytically dissociating NaCl(g) into Na⁺+Cl⁺ costs more energy than ionizing gaseous Na into Na⁺+e^?. Does this violate Coulomb's law since the Na-Cl bond distance in NaCl(g) is greater than the average Na nucleus-valance electron distance?     

Asymmetric membranes with modified gold films as selective gates for metal ion separations

Thin layers of gold (700 Å) were deposited on manufactured alumina pourous supports to yield nanopores with openings of <7 nm. A self-assembled monolayer (SAM) of alkyl thiols was then attached to provide a hydrophobic support for trialkyl phosphine oxide-based metal ion carriers. The resulting gated membranes provided a barrier to ions including H⁺, and Ca²⁺, NO₃⁻, and CH₃COO⁻. When an aqueous feed solution of 4.2 mM uranyl nitrate and 1 M lithium nitrate pH 4, and a receiving solution of 1 M sodium acetate pH 5.5 were used 100% of the metal was transported across the membrane by facilitated transport via the phosphate or phosphine oxide carrier. The thin gates transported metal ions as neutral nitrate complexes with fluxes high enough to be limited by the alumina support. The flux rates of 200,000 metal ions per pore per second are only a factor of 5 below that observed for the potassium channel. High selectivity of U over Eu is observed until the [U] is <0.84 mM in the feed solution, despite the fact the Eu actually transports faster when U is not present. This work demonstrates that selectivity can be added without impeding transport by using thin selective layers.     

Investigation of the Montmorillonite clay-catalyzed [1,3] shift reaction of 3-methyl-2-butenyl phenyl ether

The [1,3] shift reaction of 3-methyl-2-butenyl phenyl ether was catalyzed more effectively by Montmorillonite K10 clay than Montmorillonite KSF clay, and proceeded with greatest ortho-selectivity in carbon tetrachloride at room temperature.     

Lanthanide-transition metal chalcogenido cluster materials

[(THF)3Sm(SePh)2Zn(SePh)2]n decomposes to give a variety of products, including [(THF)8Sm4Se(SePh)8](2+)[Zn8Se(SePh)16](2-), an ionic cluster that can also be prepared in more than 60% yield by stoichiometric addition of Se to a mixture of Sm(SePh)3 and Zn(SePh)2. The isostructural Nd compound [(THF)8Nd4Se(SePh)8](2+)[Zn8Se(SePh)16](2-) was also prepared by the stoichiometric route to establish the viability of this cluster type with redox-inactive Ln. In addition, the salt [Yb(THF)6](3+)[Fe4Se4(SePh)4](3-) was isolated and structurally characterized. These ionic cluster materials illustrate the difficulties associated with doping Ln ions into covalent metal chalcogenido matrixes.     

Fused s-triazino heterocycles. VIII. 1,3,4,6,9b-pentaazaphenalenes. Reactions of a methyl and bromomethyl side chain

Enhanced reactivity of the methyl group of 2-t-butyl-5-methyl-1,3,4,6,9b-pentaazaphenalene allowed acetic anhydride-catalyzed condensation reactions with several aromatic aldehydes, and base-catalyzed alkylation reactions with several alkyl halides to take place, albeit in low yields. Of the many nucleophiles tried, only salts of carboxylic acids, in the presence of 18-crown-6, were able to displace bromine from 2-(bromomethyl)-5-methyl-1,3,4,6,9b-pentaazaphenalene.     

A preliminary evaluation of the functional significance of alpha-1-acid glycoprotein glycosylation on wound healing

The laying down of collagen and fibrous tissue is a key process in wound healing, however excessive collagen (and glycoprotein) deposition causes hypertrophic and keloid scars, eg after burns. Collagen synthesis is increased in these scars compared with normal healing, as is collagenase activity, which controls the degradation pathway of collagen. The processes of wound healing are inextricably linked to those of the acute-phase response (APR): alpha-1-acid glycoprotein (AGP), a plasma glycoprotein that undergoes both an increase in concentration and an alteration in its glycosylation pattern during the APR. This study determined that AGP isolated from the plasma of burns patients was of an increased concentration and altered glycosylation pattern compared with normal plasma and was capable of directly interacting with type I collagen. It also had a profound effect on both collagen fibril formation and collagenase activity, to a degree dependent upon the percentage body surface area burned. Additionally, the results obtained provided the basis for predicting the formation of hypertrophic scars.     

Decomposition of 1,1-dichloroethene on Pd(111)

The decomposition of 1,1-dichloroethene on Pd(111) is investigated using conventional thermal desorption, laser-induced thermal desorption (LITD), and FT reflection absorption infrared spectroscopy (FT-RAIRS). The decomposition mechanism produces at least three hydrocarbon surface intermediates, including ethylidyne. Thermal desorption results differ between high and low coverages because of relative surface concentrations of Cl and H in combination with kinetic effects.     

Multivalent drug design. Synthesis and in vitro analysis of an array of vancomycin dimers

The design, synthesis, and in vitro microbiological analysis of an array of forty covalently linked vancomycin dimers are reported. This work was undertaken to systematically probe the impact of linkage orientation and linker length on biological activity against susceptible and drug-resistant Gram-positive pathogens. To prepare the array, monomeric vancomycin synthons were linked through four distinct positions of the glycopeptide (C-terminus (C), N-terminus (N), vancosamine residue (V), and resorcinol ring (R)) in 10 unique pairwise combinations. Amphiphilic, peptide-based linkers of four different lengths (11, 19, 27, and 43 total atoms) were employed. Both linkage orientation and linker length were found to affect in vitro antibacterial potency. The V-V series displayed the greatest potency against vancomycin-susceptible organisms and vancomycin-resistant Enterococcus faecalis (VRE) of VanB phenotype, while the C-C, C-V, and V-R series displayed the most promising broad-spectrum activity that included VRE of VanA phenotype. Dimers bearing the shortest linkers were in all cases preferred for activity against VRE. The effects of linkage orientation and linker length on in vitro potency were not uniform; for example, (1) no single compound displayed activity that was superior against all test organisms to that of vancomycin or the other dimers, (2) linker length effects varied with test organism, and (3) whereas one-half of the dimers were more potent than vancomycin against methicillin-susceptible Staphylococcus aureus (MSSA), only one dimer was more potent against methicillin-resistant S. aureus (MRSA) and glycopeptide-intermediate susceptible S. aureus (GISA). In interpreting the results, we have considered the potential roles of multivalency and of other phenomena.     

Mechanical and thermal properties of dragline silk from the spider Nephila clavipes

Dragline silk from the spider, Nephila clavipes, was characterized by thermal analysis (TGA, DSC, DMA), computational modeling, scanning electron microscopy and by quasi-static as well as high rates of strain. Thermal stability to about 230°C was observed by TGA, two transitions by DMA, ?75°C, representative of localized motion in the amorphous domain, and a main chain motion associated with partial melt at 210°C. Tensile tests indicated average initial modulus, ultimate tensile strength and ultimate tensile strain of 22 GPa, 1.1 GPa and 9%, respectively. The corresponding properties of the best fibers tested were 60 GPa, 2.9 GPa and 11%, respectively. High strain rates (>50,000%/sec) indicated similar mechanical properties to the average values indicated above. Microscopy showed compressive and tensile strains to failure of 34%. Computational modeling yielded a crystal modulus of 200 GPa.     

Endogenous and exogenous hydrogen influence on amorphous silicon thin films analysis by pulsed radiofrequency glow discharge optical emission spectrometry

During the last decade the photovoltaic industry has been growing rapidly. One major strategy to reduce the production costs is the use of thin film solar cells based on hydrogenated amorphous silicon (a-Si:H). The potential of pulsed radiofrequency glow discharge coupled to optical emission spectrometry (rf-PGD-OES) for the analysis of such type of materials has been investigated in this work. It is known that when hydrogen is present in the argon discharge, even in small quantities, significant changes can occur in the emission intensities and sputtering rates measured. Therefore, a critical comparison has been carried out by rf-PGD-OES, in terms of emission intensities, penetration rates and depth resolution for two modes of hydrogen introduction in the discharge, manually external hydrogen in gaseous form (0.2% H₂–Ar) or internal hydrogen, sputtered as a sample constituent. First, a comparative optimisation study (at 600 Pa and 50 W) was performed on conducting materials and on a silicon wafer varying the pulse parameters: pulse frequency (500 Hz–20 kHz) and duty cycle (12.5–50%). Finally, 600 Pa, 50 W, 10 kHz and 25% duty cycle were selected as the optimum conditions to analyse three types of hydrogenated samples: an intrinsic, a B-doped and a P-doped layer based on a-Si:H. Enhanced emission intensities have been measured for most elements in the presence of hydrogen (especially for silicon) despite the observed reduced sputtering rate. The influence of externally added hydrogen and that of hydrogen sputtered as sample constituent from the analysed samples has been evaluated.