Electronic structure and transport properties of early transition metal tripledeckers

The electronic structure and transport properties of the Cp(2)BzM(2) (M = Sc, Ti, and V) tripledeckers are studied by spin polarized density functional theory and nonequilibrium Green's function method considering high-spin and low-spin states. Total energy calculations show that the sandwich structured Cp(2)BzSc(2) exists in a singlet state with no local magnetic moment on the Sc atoms. Cp(2)BzTi(2) in triplet state exists as a distorted tripledecker and is more stable than singlet and quintet states. Cp(2)BzV(2) stabilizes in the quintet state with a spin density of 2.4 on each vanadium atom. Hund's coupling plays a vital role in stabilizing the higher multiplets in case of titanium and vanadium clusters. In bigger clusters like Cp(3)Bz(2)M(4), Sc multidecker has one unpaired spin, Ti multidecker has five unpaired spins, and V multidecker has seven unpaired spins in total. Spin polarized electronic transport is found for all states of vanadium tripledecker and one state of the titanium tripledecker when connected to a gold two probe junction. Moderate to high-spin filter efficiencies are calculated for these states. Cp(2)BzSc(2) shows spin-independent electronic transport for all electronic states when introduced in the gold two probe junction. Current versus voltage curves are reported for selected clusters in the two probe setup.     

Synthesis and hydride transfer reactions of cobalt and nickel hydride complexes to BX3 compounds

Hydrides of numerous transition metal complexes can be generated by the heterolytic cleavage of H(2) gas such that they offer alternatives to using main group hydrides in the regeneration of ammonia borane, a compound that has been intensely studied for hydrogen storage applications. Previously, we reported that HRh(dmpe)(2) (dmpe = 1,2-bis(dimethylphosphinoethane)) was capable of reducing a variety of BX(3) compounds having a hydride affinity (HA) greater than or equal to the HA of BEt(3). This study examines the reactivity of less expensive cobalt and nickel hydride complexes, HCo(dmpe)(2) and [HNi(dmpe)(2)](+), to form B-H bonds. The hydride donor abilities (ΔG(H(-))°) of HCo(dmpe)(2) and [HNi(dmpe)(2)](+) were positioned on a previously established scale in acetonitrile that is cross-referenced with calculated HAs of BX(3) compounds. The collective data guided our selection of BX(3) compounds to investigate and aided our analysis of factors that determine favorability of hydride transfer. HCo(dmpe)(2) was observed to transfer H(-) to BX(3) compounds with X = H, OC(6)F(5), and SPh. The reaction with B(SPh)(3) is accompanied by the formation of dmpe-(BH(3))(2) and dmpe-(BH(2)(SPh))(2) products that follow from a reduction of multiple B-SPh bonds and a loss of dmpe ligands from cobalt. Reactions between HCo(dmpe)(2) and B(SPh)(3) in the presence of triethylamine result in the formation of Et(3)N-BH(2)SPh and Et(3)N-BH(3) with no loss of a dmpe ligand. Reactions of the cationic complex [HNi(dmpe)(2)](+) with B(SPh)(3) under analogous conditions give Et(3)N-BH(2)SPh as the final product along with the nickel-thiolate complex [Ni(dmpe)(2)(SPh)](+). The synthesis and characterization of HCo(dedpe)(2) (dedpe = Et(2)PCH(2)CH(2)PPh(2)) from H(2) and a base is also discussed, including the formation of an uncommon trans dihydride species, trans-[(H)(2)Co(dedpe)(2)][BF(4)].     

Poly(γ‐glutamic acid)/Silica Hybrids with Calcium Incorporated in the Silica Network by Use of a Calcium Alkoxide Precursor

Current materials used for bone regeneration are usually bioactive ceramics or glasses. Although they bond to bone, they are brittle. There is a need for new materials that can combine bioactivity with toughness and controlled biodegradation. Sol‐gel hybrids have the potential to do this through their nanoscale interpenetrating networks (IPN) of inorganic and organic components. Poly(γ‐glutamic acid) (γ‐PGA) was introduced into the sol‐gel process to produce a hybrid of γ‐PGA and bioactive silica. Calcium is an important element for bone regeneration but calcium sources that are used traditionally in the sol‐gel process, such as Ca salts, do not allow Ca incorporation into the silicate network during low‐temperature processing. The hypothesis for this study was that using calcium methoxyethoxide (CME) as the Ca source would allow Ca incorporation into the silicate component of the hybrid at room temperature. The produced hybrids would have improved mechanical properties and controlled degradation compared with hybrids of calcium chloride (CaCl₂), in which the Ca is not incorporated into the silicate network. Class II hybrids, with covalent bonds between the inorganic and organic species, were synthesised by using organosilane. Calcium incorporation in both the organic and inorganic IPNs of the hybrid was improved when CME was used. This was clearly observed by using FTIR and solid‐state NMR spectroscopy, which showed ionic cross‐linking of γ‐PGA by Ca and a lower degree of condensation of the Si species compared with the hybrids made with CaCl₂ as the Ca source. The ionic cross‐linking of γ‐PGA by Ca resulted in excellent compressive strength and reduced elastic modulus as measured by compressive testing and nanoindentation, respectively. All hybrids showed bioactivity as hydroxyapatite (HA) was formed after immersion in simulated body fluid (SBF).     

The determination of glutathione-4-hydroxynonenal (GSHNE), E-4-hydroxynonenal (HNE), and E-1-hydroxynon-2-en-4-one (HNO) in mouse liver tissue by LC-ESI-MS

Glutathione (GSH) conjugation of 4-hydroxy-2(E)-nonenal (HNE) is an efficient means of cellular detoxification. HNE is a byproduct of lipid peroxidation which has shown toxicity but also signaling roles. E-1-hydroxynon-2-en-4-one (HNO) is another byproduct of lipid peroxidation which has the same molecular weight as HNE. This study presents the LC-MS detection of GS-HNE, HNE, and HNO in tissue samples without derivatization and with minimal sample preparation. Tissue samples were taken from wild-type mice and knock-out mice, which have been bred without the RLIP76 transfer protein. Extraction procedures were developed to determine GS-HNE and HNE levels in the mouse liver tissue. A gradient elution LC-MS method was developed for GS-HNE analysis using electrospray ionization and selected ion monitoring (SIM). The HNE/HNO method involves isocratic elution due to instability issues. Higher levels of GSHNE, HNE, and HNO were found in the knock-out animals, due to the absence of the RLIP76 transport mechanism.     

A Comparison of Two Methods of Formant Frequency Estimation for High-Pitched Voices

This study sought to compare formant frequencies estimated from natural phonation to those estimated using two methods of artificial laryngeal stimulation: (1) stimulation of the vocal tract using an artificial larynx placed on the neck and (2) stimulation of the vocal tract using an artificial larynx with an attached tube placed in the oral cavity. Twenty males between the ages of 18 and 45 performed the following three tasks on the vowels /a/ and /i/: (1) 4 seconds of sustained vowel, (2) 2 seconds of sustained vowel followed by 2 seconds of artificial phonation via a neck placement, and (3) 4 seconds of sustained vowel, the last two of which were accompanied by artificial phonation via an oral placement. Frequencies for formants 1-4 were measured for each task at second 1 and second 3 using linear predictive coding. These measures were compared across second 1 and second 3, as well as across all three tasks. Neither of the methods of artificial laryngeal stimulation tested in this study yielded formant frequency estimates that consistently agreed with those obtained from natural phonation for both vowels and all formants. However, when estimating mean formant frequency data for samples of large N, each of the methods agreed with mean estimations obtained from natural phonation for specific vowels and formants. The greatest agreement was found for a neck placement of the artificial larynx on the vowel /a/.     

Can listeners hear who is singing? A comparison of three-note and six-note discrimination tasks

Timbre is typically investigated as a perceptual attribute that differentiates a sound source at one pitch and loudness. Yet the perceptual usefulness of timbre is that it allows the listener to recognize one sound source at different pitches. This paper investigated the ability of listeners to identify which pitch in an ascending or descending sequence of three or six stimuli was sung by a different singer. For three-note sequences, the task was extremely difficult, and with rare exceptions, listeners chose the most dissimilarly pitched stimulus as coming from the oddball singer. For six-note sequences, the detection of the oddball singer was much improved in spite of the added complexity of the task. These results support the idea that timbre should be understood as a transformation that connects the different sounds of one source and that a "rich" set of sounds is necessary to discover the trajectory.     

Characterization of photochemical processes for H2 production by CdS nanorod-[FeFe] hydrogenase complexes

We have developed complexes of CdS nanorods capped with 3-mercaptopropionic acid (MPA) and Clostridium acetobutylicum [FeFe]-hydrogenase I (CaI) that photocatalyze reduction of H(+) to H(2) at a CaI turnover frequency of 380-900 s(-1) and photon conversion efficiencies of up to 20% under illumination at 405 nm. In this paper, we focus on the compositional and mechanistic aspects of CdS:CaI complexes that control the photochemical conversion of solar energy into H(2). Self-assembly of CdS with CaI was driven by electrostatics, demonstrated as the inhibition of ferredoxin-mediated H(2) evolution by CaI. Production of H(2) by CdS:CaI was observed only under illumination and only in the presence of a sacrificial donor. We explored the effects of the CdS:CaI molar ratio, sacrificial donor concentration, and light intensity on photocatalytic H(2) production, which were interpreted on the basis of contributions to electron transfer, hole transfer, or rate of photon absorption, respectively. Each parameter was found to have pronounced effects on the CdS:CaI photocatalytic activity. Specifically, we found that under 405 nm light at an intensity equivalent to total AM 1.5 solar flux, H(2) production was limited by the rate of photon absorption (~1 ms(-1)) and not by the turnover of CaI. Complexes were capable of H(2) production for up to 4 h with a total turnover number of 10(6) before photocatalytic activity was lost. This loss correlated with inactivation of CaI, resulting from the photo-oxidation of the CdS capping ligand MPA.     

Tunable growth factor delivery from injectable hydrogels for tissue engineering

Current sustained delivery strategies of protein therapeutics are limited by the fragility of the protein, resulting in minimal quantities of bioactive protein delivered. In order to achieve prolonged release of bioactive protein, an affinity-based approach was designed which exploits the specific binding of the Src homology 3 (SH3) domain with short proline-rich peptides. Specifically, methyl cellulose was modified with SH3-binding peptides (MC-peptide) with either a weak affinity or strong affinity for SH3. The release profile of SH3-rhFGF2 fusion protein from hyaluronan MC-SH3 peptide (HAMC-peptide) hydrogels was investigated and compared to unmodified controls. SH3-rhFGF2 release from HAMC-peptide was extended to 10 days using peptides with different binding affinities compared to the 48 h release from unmodified HAMC. This system is capable of delivering additional proteins with tunable rates of release, while maintaining bioactivity, and thus is broadly applicable.     

Stretchable Gas Barrier Achieved with Partially Hydrogen‐Bonded Multilayer Nanocoating

Super gas barrier nanocoatings are recently demonstrated by combining polyelectrolytes and clay nanoplatelets with layer‐by‐layer deposition. These nanobrick wall thin films match or exceed the gas barrier of SiO_x and metallized films, but they are relatively stiff and lose barrier with significant stretching (≥10% strain). In an effort to impart stretchability, hydrogen‐bonding polyglycidol (PGD) layers are added to an electrostatically bonded thin film assembly of polyethylenimine (PEI) and montmorillonite (MMT) clay. The oxygen transmission rate of a 125‐nm thick PEI‐MMT film increases more than 40x after being stretched 10%, while PGD‐PEI‐MMT trilayers of the same thickness maintain its gas barrier. This stretchable trilayer system has an OTR three times lower than the PEI‐MMT bilayer system after stretching. This report marks the first stretchable high gas barrier thin film, which is potentially useful for applications that require pressurized elastomers.