高固含量聚合物乳液制备方法新进展

高固含量一直是聚合物乳液制备追求的目标 ,本文将高固含量 (>6 0 % )聚合物乳液的制备方法按机理分为控制乳胶粒直径分布 ,增大乳胶粒直径和使乳胶粒发生形变三类 ,详细评述了各种制备方法的研究进展 ,并对高固含量乳液制备的发展进行了展望。     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

聚合物共混物脆韧转变性能研究 Ⅱ准韧性聚合物共混物脆韧转变的几何模型

给出了分散相粒间基体层厚度Ｔ与分散相粒径（ｄ）、粒径分散度（σ）和分散相体积分数（）的定量关系式．发现σ对Ｔ的影响与有关，不仅Ｔ随σ的增大而增大，而且越大，这种影响越显著．用计算机图像分析仪直接测定了聚氯乙烯／丁腈橡胶、聚丙烯（ＰＰ）／三元乙丙橡胶、ＰＰ／乙烯 醋酸乙烯酯共聚物共混物的Ｔ，发现这三种共混物的Ｔ近似于对数正态分布．理论预示与实验结果很好符合．     

聚醚醚酮微结构及反应特性的量子化学研究

利用AM1对聚醚醚酮重复单元进行条件优化,得出了此分子的最优构型,明确了聚醚醚酮分子链的微观构象,并在此构象基础上进行量子化学计算,给出了健序、净电荷、前线轨道等信息,从理论上研究了聚醚醚酮的磺化反应及热分解反应的一些特性.     

Two New ent-Kaurane Diterpenoids from Isodon xerophilus

In continuation of our research on diterpenoids in the Isodon species, several newcompounds"' were obtained from the leaves oflsodon xerophilus (C. Y. Wu et H. W. Li)H. Hara (Labiatae), a perennial shrub native to Yunnan province. Further fractionation ofthe EtOAc extract led to the isolation of tWo new enl-kauranoids, xerophilusin E (l) andxerophilusin F (2). This paper deals with the structUral elucidation of the newcompounds.Xerophilusin E (l), a minor constitUent, was obtained as p…     

烯胺酮与烯胺酯的交叉缩合反应及自缩合反应的区域选择性研究

烯胺酮与烯胺酯以(3C+3C)缩合反应形成多取代芳环化合物,具有区域选择性。用波谱和 X-射线衍射技术确定了产物的结构,讨论了反应机理。     

516—Synthetic and biological membranes

Biological cell membranes are compared to artificially produced permselective membranes. In spite of the difference in their thickness and electric resistance it is shown that they are similar in many important aspects, and the behaviour of synthetic membranes can explain very many points in the behaviour of cell membranes, especially axons. It is stressed that it is seldom necessary to assume unproven channels in biological membranes which are specific in the transport of a single ion species. Most of the phenomena of selectivity, opening and closing of such membranes can be explained by the influence of pH on membrane sites, by their poisoning with higly charged and/or large counter-ions. The borderline between two oppositely charged regions of a mosaic membrane opens up because it can be traversed by both positive and negative ions and permselectively is lost. Bipolar membranes rectify the current. Amphoteric membranes undergo very complex changes in conducting properties and permselectively with pH, especially when allowance is made for the weakly dissociated sites contained within these membranes. It is suggested that black lipid membranes made in the laboratory could be used to elucidate new points of similarity if they were used under similar conditions to our technical membranes.     

甲基硅羟基封端硅树脂的合成及固化性能

将甲基三氯硅烷和二甲基二氯硅烷分别与二苯基二羟基硅烷反应得到1,1,5,5-四氯-1,5-二甲基-3,3-二苯基三硅氧烷(A)和1,1,5,5-四甲基-1,5-二氯-3,3-二苯基三硅氧烷(B)。按一定比例将(A)和(B)水解缩合得到完全是甲基硅羟基封端树脂(Ⅰ)。将甲基三氯硅烷和甲基三乙酰氯基硅烷分别处理一般共水解法硅封端树脂可得到另外两种甲基硅羟基封端树脂(Ⅱ)和(Ⅲ),将树脂Ⅰ、Ⅱ、Ⅲ与一般共水解法得到的具有相同R/Si和Ph/R(R代表甲基和苯基)的树脂(Ⅳ、Ⅴ、Ⅵ)进行固化试验,结果表明,甲基-硅羟基封端树脂(Ⅰ—Ⅲ)的固化速度为共水解法制得的以苯基硅羟基封端树脂(Ⅳ—Ⅵ)固化速度的两倍以上。     

The effect of grass fiber filler on curing characteristics and mechanical properties of natural rubber

Natural rubber is reinforced with a novel type of grass fiber (Cyperus Tegetum Rox b). The effects of fiber loading of different mesh sizes on curing characteristics and mechanical properties of grass fiber filled natural rubber composite are studied. Since 400 mesh grass fiber loaded natural rubber composite shows superior mechanical properties, therefore the effect of silane coupling agent was studied for this particular composite. Here composites were prepared by using water leached grass fiber. Optimum cure time increases with the increase in fiber loading but the change in scorch time is less. The same trend of increase in optimum cure time is observed in the presence of Si69. But the value is higher compared to that of rubber composite without Si69. With increase in the fiber loading, modulus and hardness of the composite increases but tensile strength decreases. The mechanical properties of the composite, namely moduli at 200 and 300% elongation and hardness increase in the presence of Si69 but tensile strength is less compared to that of the composite without Si69. Elongation at break is not much affected due to the presence of Si69. Copyright © 2004 John Wiley & Sons, Ltd.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.