Synthesis and properties of As<Subscript>x</Subscript>Te<Subscript>100−x</Subscript> films prepared by plasma deposition via elemental As and Te

As_xTe_100?x chalcogenide films (where x = 30–80 at.%) were synthesized via direct interaction of arsenic and tellurium vapors into low-temperature non-equilibrium RF (40 MHz) plasma discharge at reduced pressure. Phase and structural evolution of As_xTe_100?x films were implemented by gradual changing of the ratio of the initial substances in the gas phase. The dependence of the films structure, surface morphology and optical properties on phase and chemical content has been studied.     

Anisotropic alpha-emission in the223Ra decay chain

Anisotropic α-emission from nuclei in the decay chain from²²³Ra to²⁰⁷Tl has been observed using low temperature nuclear orientation in combination with high resolution α-detection at 4.2 K. Information on partial wave amplitudes as well as hyperfine interactions has been extracted.     

Projector Quantum Monte Carlo without minus-sign problem

Quantum Monte Carlo techniques often suffer from the so-called minus-sign problem. This paper explores a possibility to circumvent this fundamental problem by combining the Projector Quantum Monte Carlo method with the variational principle. Results are presented for the two-dimensional Hubbard model.     

Kinetic limits of the HPP cellular automaton

We study the Boltzmann-Grad limit in various versions of the two-dimensional HPP cellular automaton. In the completely deterministic case we prove convergence to an evolution that is not of kinetic type, a well-known phenomenon after Uchyiama's paper on the Broadwell gas, whereas the limiting equation becomes of kinetic type in the model with random collisions. The main part of the paper concerns the case where the collisions are deterministic and the randomness comes from inserting, between any two successive HPP updatings, ^- stirring updatings, <1 being any fixed positive number and a parameter which tends to 0. The initial measure is a product measure with average occupation numbers of the order of (low-density limit) and varying on distances of the order of ^–1. The limit as 0 of the system evolved for times of the order of ^-1- corresponds to the Boltzmann-Grad limit. We prove propagation of chaos and that the renormalized average occupation numbers (i.e., divided by) converge to the solution of the Broadwell equation. Convergence is proven at all times for which the solution of the Broadwell equation is bounded.     

Qualitative analysis of ten-dimensional lovelock cosmological models

The Einstein-like field equations obtained from the variation of a Lagrangian containing linear, quadratic (Gauss-Bonnet) and quartic terms for a ten-dimensional cosmological model cannot be solved analytically. However, we can reduce them to a system of dynamical equations for the Hubble parameters. The study of the mathematical properties of the fixed points of this system gives a qualitative picture of the behaviour of a class of possible solutions. The inclusion of a quartic term generates an extremely rich structure for the corresponding dynamical system. Some solutions are shown to exhibit the interesting property of dimensional reduction, which has been proposed as a possible explanation of the three-dimensional character of our universe.     

The Bell inequalities and the joint measurement of incompatible observables

A quantum-mechanical theory of joint nonideal measurement of incompatible polarization observables is applied to an EPR-like experiment. It is demonstrated that this experiment yields both information satisfying and information violating the Bell inequalities. The measurement is also discussed in the context of a local hidden-variables theory. It is argued that the violation of an additional assumption of reproducibility of the hidden variable rather than violation of locality may be responsible for the violation of the Bell inequalities.     

Multiplicity structure of inclusive diffraction in À+ p andK + p interactions at 250 GeV/c

Results on the multiplicity structure of diffractively excited meson and proton systems in À⁺/K⁺ p interactions at 250 GeV/c are presented for diffractive masses up to about 9 GeV. The energy dependence of the average charge multiplicity and the shape of the multiplicity distribution in terms of KNO-scaling and negative binomial distribution are investigated. The diffractive systems are compared toe ⁺ e ^–,lh and non-diffractivehh final states as suggested by modern approaches of the Pomeron-hadron collision. Systematic differences are found between diffractive meson and proton systems but also between diffraction and the reactions compared to.     

Preparation of PdAu/C-Sb2O5·SnO2 electrocatalysts by borohydride reduction process for direct formic acid fuel cell

Pd/C-Sb₂O₅·SnO₂ and PdAu/C-Sb₂O₅·SnO₂ electrocatalysts with different PdAu atomic ratio (90:10, 70:30, and 50:50) were prepared by borohydride reduction method, and characterized by X-ray diffraction, transmission electron microscopy, cyclic voltammetry, chronoamperommetry, and performance test on direct formic acid fuel cell at 100 °C. X-ray diffraction showed for Pd/C-Sb₂O₅·SnO₂ the presence of Pd face-centered cubic (fcc) system, while for PdAu/C-Sb₂O₅·SnO₂ it showed the presence of Pd fcc phase, PdAu fcc alloys and a segregated phases fcc Pd-rich and Au-rich phases. TEM micrographs and histograms for all electrocatalysts showed that the nanoparticles where not well dispersed on the support and some agglomerates were present. The electrochemical studies showed that PdAu/C-Sb₂O₅·SnO₂ (70:30) had superior performance for formic acid electro-oxidation at 25 °C compared to others electrocatalysts prepared while PdAu/C-Sb₂O₅·SnO₂ (90:10) showed superior performance in direct formic acidic fuel cell at 100 °C. These results indicated that the addition of 10–30 % Au to Pd favor the electro-oxidation of formic acid. This effect could be attributed to the synergy between the constituents of the electrocatalyst (metallic Pd and Au, SnO₂, and Sb₂O₅·SnO₂).     

Transmit-Only/Receive-Only Radiofrequency System for Hyperpolarized 13C MRS Cardiac Metabolism Studies in Pigs

Hyperpolarized ¹³C magnetic resonance spectroscopy in pig models enables metabolic activity mapping, providing a powerful tool for the study of the heart physiology, but requires the development of dedicated radiofrequency coils, capable of providing large field of view with high signal-to-noise ratio (SNR) data. This work describes the simulations and the tests of a transmit-only (TX) volume coil/receive-only (RX) surface coil both designed for hyperpolarized studies of pig heart with a clinical 3T scanner. The coil characterization is performed by developing an SNR model for coil performance in terms of coil resistance, sample-induced resistance and magnetic field pattern. In particular, coil resistances were calculated from Ohm’s law, while magnetic field patterns and sample-induced resistances were calculated using a numerical finite-difference time-domain algorithm. Experimental phantom chemical shift image, showed good agreement with the theoretical SNR-vs-depth profiles and highlighted the advantage of the novel configuration over the single transmit–receive coils throughout the volume of interest for cardiac imaging in pig. Finally, the TX-birdcage/RX-circular configuration was tested by acquiring metabolic maps with hyperpolarized [1-13C] pyruvate injected i.v. in a pig. The results of the phantom and pig experiments show the ability of the coil configuration to image well the metabolites distribution.     

Boat-like Au nanoparticles embedded mesoporous γ-Al2O3 films: an efficient SERS substrate

A new water-dispersible nanostructure based on magnetite (Fe₃O₄) and usnic acid (UA) was prepared in a well-shaped spherical form by a precipitation method. Nanoparticles were well individualized and homogeneous in size. The presence of Fe₃O₄@UA was confirmed by transmission electron microscopy, Fourier transform-infrared spectroscopy, and X-ray diffraction. The UA was entrapped in the magnetic nanoparticles during preparation and the amount of entrapped UA was estimated by thermogravimetric analysis. Fabricated nanostructures were tested on planktonic cells growth (minimal inhibitory concentration assay) and biofilm development on Gram-positive Staphylococcus aureus (S. aureus), Enterococcus faecalis (E. faecalis) and Gram-negative Escherichia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) reference strains. Concerning the influence of Fe₃O₄@UA on the planktonic bacterial cells, the functionalized magnetic nanoparticles exhibited a significantly improved antimicrobial activity against E. faecalis and E. coli, as compared with the Fe₃O₄ control. The UA incorporated into the magnetic nanoparticles exhibited a very significant inhibitory effect on the biofilm formed by the S. aureus and E. faecalis, on a wide range of concentrations, while in case of the Gram-negative microbial strains, the UA-loaded nanoparticles inhibited the E. coli biofilm development, only at high concentrations, while for P. aeruginosa biofilms, no inhibitory effect was observed. The obtained results demonstrate that the new water-dispersible Fe₃O₄@UA nanosystem, combining the advantages of the intrinsic antimicrobial features of the UA with the higher surface to volume ratio provided by the magnetic nanocarrier dispersible in water, exhibits efficient antimicrobial activity against planktonic and adherent cells, especially on Gram-positive strains.