Deployment of the encapsulation-dehydration protocol to cryopreserve microalgae held at the Sammlung von Algenkulturen, Universitat Gottingen, Germany

Encapsulation-dehydration was applied to cryopreserve 14 diverse algal strains, representing eukaryotic terrestrial microalgae; of these 12 survived to form cell colonies after recovery from cryostorage. Surviving algae had varying degrees of tolerance to osmotic dehydration and desiccation in this vitrification-based cryoprotective strategy. The extent of algal regrowth was affected by the mode of desiccation (silica gel or air-flow), the duration of evaporative desiccation and exposure to light during early recovery phase. This paper: (i) demonstrates the versatility of the encapsulation/dehydration method to cryopreserve diverse microalgae; (ii) confirms the successful transfer of this cryostorage technology to the Culture Collection of Algae at Gottingen University (SAG); and (iii) recommends encapsulation/dehydration as a feasible alternative to controlled rate cooling for preserving algae held in international culture collections.     

Bioactive borate glass scaffold for bone tissue engineering

Borate glass particles and microspheres with size distributions in the range of approximately 100–400 μm, were loosely compacted and sintered for 10 min at 600 °C to form a porous, three-dimensional construct (porosity 25–40%). Conversion of the borate glass to hydroxyapatite was investigated by soaking the constructs in a solution of K₂HPO₄ (0.25 M) at 37 °C and with a pH value of 9.0, and measuring the weight loss of the constructs as a function of time. Almost full conversion of the borate glass to hydroxyapatite was achieved in less than 6 days. X-ray diffraction revealed an initially amorphous product that subsequently crystallized to hydroxyapatite. The biocompatibility of the porous constructs was investigated by in vitro cell culture with human mesenchymal stem cells derived from bone marrow (bMSC) and human mesenchymal stem cell derived osteoblasts (MSC-Ob). The cells adhered to the scaffolds and the MSC-Obs produced alkaline phosphatase which is an indication of osteogenic differentiation. The data suggest strong bioactive characteristics for the borate glass constructs and the potential use of the constructs as scaffolds for tissue engineering of bone.     

Solvent-Free Synthesis of Nano Zirconium Phenylphosphonates with Molten Phenylphosphonic Acid

Nanosized α-zirconium phenylphosphonate particles were successfully prepared by the reaction between different zirconium sources and molten phenylphosphonic acid in the absence of solvent. The resultant nanoplates exhibit particle sizes in the range of 15 to 30 nm. The use of a topotactic anion exchange method starting from α-zirconium phosphate instead resulted in the generation of 15 to 180 nm plates, while also resulting in nanoparticles with a higher degree of crystallinity. The topotactic anion exchange of the phosphate groups by phenylphosphonate groups could be performed to completion when performed in molten phenylphosphonic acid. Characterization of both the final products as well as the individual steps in the anion exchange were performed by powder XRD, fast neutron activation analysis, TGA, FTIR spectroscopy, TEM, solid-state NMR and XPS.     

Photoinduced Nonlinear Contraction Behavior in Metal–Organic Frameworks

The photoinduced dynamic behavior of flexible materials has received considerable attention for potential applications, such as in data storage or as smart optical devices and molecular mechanical actuators. Until now, precisely controlling expansion and contraction with light has remained a challenge. Unraveling the detailed mechanisms of photoinduced structural transformations remains a critical step necessary to understand the molecular architecture necessary for the design of sensitive photomechanical actuators. Herein, a two-dimensional flexible metal–organic framework [Zn₂(bdc)₂(3-CH₃-spy)₂]⋅H₂O ( Zn₂-1 ; H₂bdc=1,4-benzenedicaboxylic acid; 3-CH₃-spy=3-methylstyrylpyridine) with a positive volumetric thermal expansion coefficient of +78.78×10⁻⁶ K⁻¹ is reported. Upon light irradiation at different wavelengths, the MOF underwent a [2+2] cycloaddition, which afforded a family of isomeric, three-dimensional MOFs ( Zn₂-2 n , n=a–d) in a single-crystal-to-single-crystal (SCSC) manner. An unprecedented phenomenon, that is, photoinduced nonlinear contraction (PINC), was observed during this conversion. The PINC is caused by conformational changes in the 3-CH₃-spy and bdc²⁻ ligands, the bending of metal–ligand bonds, and the local distortion of the paddle-wheel SBUs. The formation of a “wrinkle morphology” on the crystal surface after the photoreaction was observed by AFM. This PINC behavior can broaden the studies on materials expansion and offer a photodriven approach for the future design of supersensitive photomechanical actuators.     

Synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane, and 2-(pyridin-3-yl)-1-azabicyclo[3.2.1]octane, a class of potent nicotinic acetylcholine receptor-ligands

In an attempt to generate nicotinic acetylcholine receptor (nAChR) ligands selective for the alpha4beta2 and alpha7 subtype receptors we designed and synthesized constrained versions of anabasine, a naturally occurring nAChR ligand. 2-(Pyridin-3-yl)-1-azabicyclo[2.2.2]octane, 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, and several of their derivatives have been synthesized in both an enantioselective and a racemic manner utilizing the same basic synthetic approach. For the racemic synthesis, alkylation of N-(diphenylmethylene)-1-(pyridin-3-yl)methanamine with the appropriate bromoalkyltetrahydropyran gave intermediates which were readily elaborated into 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane and 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via a ring opening/aminocyclization sequence. An alternate synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via the alkylation of N-(1-(pyridin-3-ylethylidene)propan-2-amine has also been achieved. The enantioselective syntheses followed the same general scheme, but utilized imines derived from (+)- and (-)-2-hydroxy-3-pinanone. Chiral HPLC shows that the desired compounds were synthesized in >99.5% ee. X-ray crystallography was subsequently used to unambiguously characterize these stereochemically pure nAChR ligands. All compounds synthesized exhibited high affinity for the alpha4beta2 nAChR subtype ( K i < or = 0.5-15 nM), a subset bound with high affinity for the alpha7 receptor subtype ( K i < or = 110 nM), selectivity over the alpha3beta4 (ganglion) receptor subtype was seen within the 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane series and for the muscle (alpha1betagammadelta) subtype in the 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane series.     

Experimental Confirmation of a Predicted Porous Hydrogen-Bonded Organic Framework

Hydrogen-bonded organic frameworks (HOFs) with low densities and high porosities are rare and challenging to design because most molecules have a strong energetic preference for close packing. Crystal structure prediction (CSP) can rank the crystal packings available to an organic molecule based on their relative lattice energies. This has become a powerful tool for the a priori design of porous molecular crystals. Previously, we combined CSP with structure-property predictions to generate energy-structure-function (ESF) maps for a series of triptycene-based molecules with quinoxaline groups. From these ESF maps, triptycene trisquinoxalinedione (TH5) was predicted to form a previously unknown low-energy HOF (TH5-A) with a remarkably low density of 0.374 g cm⁻³ and three-dimensional (3D) pores. Here, we demonstrate the reliability of those ESF maps by discovering this TH5-A polymorph experimentally. This material has a high accessible surface area of 3,284 m² g⁻¹, as measured by nitrogen adsorption, making it one of the most porous HOFs reported to date.     

Towards prediction of stoichiometry in crystalline multicomponent complexes

We report on the crystal structure of urea (U) with acetic acid (A), its physical stability and its predictability using computational methods. The crystal structure of urea:acetic acid (U:A) shows hydrogen-bond ribbons and a 1:2 stoichiometry. Crystal structure prediction calculations are presented for two sets of U:A stoichiometries: 1:1 and 1:2. A 1:3 stoichiometry is also partially explored by means of a synthon approach. The calculated lattice energies, along with hydrogen-bond patterns, of crystal structures predicted with the three stoichiometries are presented and analysed to provide a rationalisation for the stoichiometry observed. Exploring stoichiometric diversity using computational methods provides a tool for the rationalisation of stoichiometry preferences in crystalline multicomponent systems and a first step towards their prediction.     

Iridium corroles

This work reports the synthesis and full characterization of 5,10,15-tris-pentafluorophenylcorrolato-iridium(III) bis-trimethylamine 1 and its octabromo derivative 2. The corrole is planar in both cases (the mean deviation from the plane is as low as 0.0371 A for 1 and 0.0325 A for 2), the UV-vis spectra display a split Soret band with a shoulder attributable to an MLCT transition, and cyclic voltammetry reveals that the iridium(II) oxidation state cannot be accessed, while the oxidation to formal iridium(IV) complexes is achieved at much lower potentials than in other coordination environments.     

Experimental and theoretical studies of the effect of mass on the dynamics of gas/organic-surface energy transfer

The effect of mass on gas/organic-surface energy transfer is explored via investigation of the scattering dynamics of rare gases (Ne, Ar, and Kr) from regular (CH3-terminated) and omega-fluorinated (CF3-terminated) alkanethiol self-assembled monolayers (SAMs) at 60 kJmol collision energy. Molecular-beam scattering experiments carried out in ultrahigh vacuum and molecular-dynamics simulations based on high-accuracy potentials are used to obtain the rare-gases' translational-energy distributions after collision with the SAMs. Simulations indicate that mass is the most important factor in determining the changes in the energy exchange dynamics for Ne, Ar, and Kr collisions on CH3- and CF3-terminated SAMs at 60 kJmol collision energy. Other factors, such as changes in the gas-surface potential and intrasurface interactions, play only a minor role in determining the differential dynamics behavior for the systems studied.