Preparation of crosslinked polystyrene-supported ethylenediamine via a S-containing spacer and adsorption properties towards metal ions

Two novel chelating resins were prepared by anchoring ethylenediamine to crosslinked polystyrene via a spacer containing sulfide. Their structures were characterized by Fourier transform-infrared spectra (FTIR) and scanning electron microscopy (SEM). Porous structure parameters of the resins were measured by ASAP 2020 using BET and BJH methods. Their adsorption capacities for several heavy metal ions especially Hg²⁺ were investigated. The results showed that for the two resins, the more N contents did not mean the better adsorption capacity and the saturated adsorption capacity of poly(2-ethylenediamidomercaptomethylstyrene) (PSM-EDA) for Hg²⁺ could reach to 3.0 mmol/g at room temperature. Isothermal adsorptions of the resins for Hg²⁺ could be described by Langmuir formula. The adsorption mechanism of the resins for Hg²⁺, Cu²⁺ and Ag⁺ was confirmed by X-ray photoelectron spectroscopy (XPS) and FTIR.     

Chloro­bis­(thio­urea‐κS)copper(I) bis(4,5‐di­aza­fluoren‐9‐one) mono­hydrate

The title compound, [CuCl(CH₄N₂S)₂]·2C₁₁H₆N₂O·H₂O, consists of mol­ecules of a Cu^I–thio­urea complex, free 4,5‐di­aza­fluoren‐9‐one (dafone) and crystalline water. The planar complex mol­ecule has trigonal coordination geometry around the Cu^I atom. The dafone and water mol­ecules, which are hydrogen bonded to the Cu^I complex, are approximately coplanar with this complex. The crystal displays a sheet structure and π–π stacking is observed between neighbouring sheets.     

Glycyl C(alpha) chemical shielding in tripeptides: measurement by solid-state NMR and correlation with X-ray structure and theory

We report here (13)C(alpha) chemical shielding parameters for central Gly residues in tripeptides adopting alpha-helix, beta-strand, polyglycine II, and fully extended 2 degrees structures. To assess experimental uncertainties in the shielding parameters and the effects of (14)N-(13)C(alpha) or (15)N-(13)C(alpha) dipolar coupling, stationary and magic angle spinning (MAS) spectra with and without (15)N decoupling were obtained from natural abundance and double-labeled samples containing [2-(13)C, (15)N]Gly. We find that accurate (<1 ppm uncertainty) shielding parameters are measured with good sensitivity and resolution in (15)N decoupled 1D or 2D MAS spectra of double-labeled samples. Compared to variations of isotropic shifts with peptide angles, those of (13)C(alpha) shielding anisotropy and asymmetry are greater. Trends relating shielding parameters to the 2 degrees structure are apparent, and the correlation of the experimental values with unscaled ab initio shielding calculations has an rms error of 3 ppm. Using the experimental data and the ab initio shielding values, the empirical trends relating the 2 degrees structure to shielding are extended to the larger range of torsion angles found in proteins.     

Ab initio study on the mechanism of reaction HNCO+NH2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH₂+ HNCO?NH₃+NCO (1) and NH₂+HNCO?N₂H₃+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300–2700 K, transition theory rate constant for reaction (1) is 1.68×10¹¹–3.29×10¹¹ mL·mol^-1·s^-1, which is close to the experimental one of 5.0×10¹¹mL·mol^-1·s^-1or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes,cis andtrans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (forcis-mode) and 147.43 kJ/mol (fortrans-mode), respectively, which is much higher than reaction (1). So reaction (1) is the main channel for the titled reaction.     

Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

Fe–Hg Interactions and P Chemical Shifts in [Fe(CO)3 (PPh2R)2(HgCl2)] (R=pym, fur, py, thi)

In order to study the effects of R group on Fe–Hg interactions and 31P chemical shifts, the structures of mononuclear complexes Fe(CO)₃(PPh₂R)₂ (R=pym:1, fur: 2, py: 3,thi: 4; pym=pyrimidine, fur=furyl, py=pyridine, thi=thiazole) and binuclear complexes [Fe(CO)₃(PPh₂R)₂(HgCl₂)] (R=pym: 5, fur: 6, py: 7, thi: 8) were studied using the density functional theory (DFT) PBE0 method. The 31P chemical shifts were calculated by PBE0-GIAO method. Nature bond orbital (NBO) analyses were also performed to explain the nature of the Fe–Hg interactions. The conclusions can be drawn as follows: (1) The complexes with nitrogen donor atoms are more stable than those with O or S atoms. The more N atoms there are, the higher is the stabilility of the complex. (2) The Fe–Hg interactions play a dominant role in the stabilities of the complexes. In 5 or 6, thereisa σ-bond between Fe and Hg atoms. However, in 7 and 8, the Fe–Hg interactions act as σ_P–Fe→n_Hg and σ_C–Fe→n_Hg delocalization. (3) Through Fe→Hg interactions, there is charge transfer from R groups towards the P, Fe, and Hg atoms, which increases the electron density on P nucleus in binuclear complexes. As a result, compared with their mononuclear complexes, the 31P chemical shifts in binuclear complexes show some reduction.     

Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels

A new kind of pH-/temperature-responsive semi-interpenetrating polymer network hydrogels based on linear sodium carboxymethylcellulose (CMC) and poly(N-isopropylacrylamide) (PNIPA) cross-linked by inorganic clay (CMC/PNIPA/Clay hydrogel) was prepared. The temperature- and pH-responsive behaviors, the mechanical properties of these hydrogels were investigated. The CMC/PNIPA/Clay hydrogels exhibited a volume phase transition temperature around 32 °C with no significant deviation from the conventional PNIPA hydrogels. The swelling ratio of the CMC/PNIPA/Clay hydrogels gradually decreased with increasing the contents of clay. The influence of pH value on swelling behaviors showed that there is a maximum swelling ratio at pH 5.9. Moreover, the CMC/PNIPA/Clay hydrogels exhibited excellent mechanical properties with high tensile stress and elongation at break in excess of 1200%.     

Helical structures architecture of l-{2-(4-hydroxy-phenyl)-1-[(pyren-1-ylmethyl)-carbamoxyl]-ethyl}-carbamic acid tert-butyl ester

A new pyrenemethylamine substituted l-Boc-tyrosine derivative was synthesized and characterized. UV-vis, FL, CD, and light scattering experiments proved that the chiral molecules were able to self-assemble for formation of new aggregate structure. The SEM and AFM images indicated that the helical wires could be fabricated by π-π stacking interaction between adjacent pyrene molecules.     

Four Novel Eremophilanolides from Ligularia sagitta

Four new eremophilanolides, isolated from Ligularia sagitta, were identified as (1β,3β,6β,8β,10β)‐6‐acetoxy‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 1 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐6,8‐dihydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 2 ), (1β,3β,6β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐ethoxy‐6‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 3 ), and (1β,3β,8β,10β)‐3‐(angeloyloxy)‐1,10‐epoxy‐8‐hydroxyeremophil‐7(11)‐en‐8,12α‐olide ( 4 ). Their structures were elucidated by spectroscopic methods, including 2D‐NMR techniques and chemical transformations.     

Xylan hydrolysis in zinc chloride solution

Xylan is the major component of hemicellulose, which consists of up to one-third of the lignocellulosic biomass. When the zinc chloride solution was used as a pretreatment agent to facilitate cellulose hydrolysis, hemicellulose was hydrolyzed during the pretreatment stage. In this study, xylan was used as a model to study the hydrolysis of hemicellulose in zinc chloride solution. The degradation of xylose that is released from xylan was reduced by the formation of zinc-xylose complex. The xylose yield was >90% (w/w) at 70°C. The yield and rate of hydrolysis were a function of temperature and the concentration of zinc chloride. The ratio of zinc chloride can be decreased from 9 to 1.3 (w/w). At this ratio, 76% of xylose yield was obtained. When wheat straw was pretreated with a concentrated zinc chloride solution, the hemicellulose hydrolysate contained only xylose and trace amounts of arabinose and oligosaccharides. With this approach, the hemicellulose hydrolysate can be separated from cellulose residue, which would be hydrolyzed subsequently to glucose by acid or enzymes to produce glucose. This production scheme provided a method to produce glucose and xylose in different streams, which can be fermented in separated fermenters.