Micromorphology of epicuticular wax structures of the garden strawberry leaves by electron microscopy: Syntopism and polymorphism

Ultrastructural aspects of leaf epicuticular wax structures were investigated in the garden strawberry Fragaria × ananassa by scanning and transmission electron microscopy. Both the adaxial and abaxial surfaces of two cultivars (Maehyang and Red Pearl) were collected and subjected to surface observations and ultrathin sections. The most prominent leaf epicuticular wax structures included membraneous platelets and angular rodlets. Most wax platelets were membraneous, and appeared to protrude from the surface at an acute angle. Angular rodlets were usually bent and had rather distinct facets in the abaxial surface of the two cultivars. Membraneous platelets were predominant on the adaxial surface of Maehyang, whereas the adaxial surface of Red Pearl was characterized by angular rodlets. However, both cultivars possessed angular rodlets on the abaxial surface, simultaneously. The combination of air-drying without vacuum and in-lens imaging of secondary electron signals with a field emission gun could impart the superb resolution at low electron dose with minimal specimen shrinkage. In vertical profiles of the leaf epidermis, epicuticular waxes were observed above the cuticle layer, and measured approximately as 50 nm in thickness. The natural epicuticular waxes were seemingly mixtures of electron-dense microfibrils, and heterogeneous in shape on ultrathin sections. Distinct crystal-like strata could be hardly discernable in the wax structures. These results suggest that the garden strawberry has the nature of syntopism within one plant and polymorphism within the same species in the formation and occurrence of leaf epicuticular waxes.     

Site‐specific reversible immobilization and purification of His‐tagged protein on poly(2‐acetamidoacrylic acid) hydrogel beads

Ni²⁺‐complexed poly(2‐acetamidoacrylic acid) (PAAA) hydrogel beads were developed for the site‐specific reversible immobilization and purification of the histidine‐tagged green fluorescent protein (His‐tagged GFP). PAAA hydrogel beads were prepared by photopolymerization, and significantly improved mechanical properties of PAAA hydrogel beads were observed in comparison with PAAA hydrogel from our previous study. Confocal laser scanning microscopy was used to determine the binding of His‐tagged GFP to the hydrogel beads in three‐dimensional space. Photoluminescence spectroscopy revealed 89% of binding efficiency of His‐tagged GFP to the Ni²⁺‐PAAA hydrogel beads, 51% of yielding recovery. The maximum binding capacity of His‐tagged GFP was estimated to be 0.45 µg/mg of Ni²⁺‐PAAA hydrogel beads. The recombinant His‐tagged GFP from the soluble fraction of E. coli BL21(DE3) cell lysates was purified with Ni²⁺‐PAAA hydrogel beads. The major advantage of the Ni²⁺‐PAAA hydrogel beads system was simple preparation procedures of producing the matrix, because PAAA hydrogel beads had relatively enhanced mechanical strength than soft hydrogels. Copyright © 2012 John Wiley & Sons, Ltd.     

New Cyclization Route to the Skeletons of Lennoxamine and Chilenine

A new cyclization route, triggered by epoxide opening, has been performed to provide the key intermediates for isoindolobenzapine alkaloids, lennoxamine and chilenine. The epoxide was prepared by the Stille reaction using vinyltributylstannane and the following dioxirane treatment. Cyclization under the treatment of BF₃ · OEt₂ provided an azepine moiety, and the oxidative cyclization toward the known precursor for the alkaloids has been achieved by reaction with a stoichiometric amount of Pd(OAc)₂. This formal synthesis suggests a new route to the alkaloids.     

Unusual mode of reactivity of 2-alkylidene-4-oxothiazolidine S-oxides under the Pummerer reaction conditions

The reactivity of 2-alkylidene-4-oxothiazolidine S-oxides under the Pummerer reaction conditions, using Ac₂O, TFAA, SOCl₂ and SOBr₂ as initiators, has been examined. Almost all reactions proceeded with absolute regioselectivity yielding α-substituted sulfides or vinyl-chloro derivatives. The mechanism for the formation of the latter products was postulated and proved experimentally.     

Designed Synthesis of Well‐Defined Pd@Pt Core–Shell Nanoparticles with Controlled Shell Thickness as Efficient Oxygen Reduction Electrocatalysts

Improving the electrocatalytic activity and durability of Pt‐based catalysts with low Pt content toward the oxygen reduction reaction (ORR) is one of the main challenges in advancing the performance of polymer electrolyte membrane fuel cells (PEMFCs). Herein, a designed synthesis of well‐defined Pd@Pt core–shell nanoparticles (NPs) with a controlled Pt shell thickness of 0.4–1.2 nm by a facile wet chemical method and their electrocatalytic performances for ORR as a function of shell thickness are reported. Pd@Pt NPs with predetermined structural parameters were prepared by in situ heteroepitaxial growth of Pt on as‐synthesized 6 nm Pd NPs without any sacrificial layers and intermediate workup processes, and thus the synthetic procedure for the production of Pd@Pt NPs with well‐defined sizes and shell thicknesses is greatly simplified. The Pt shell thickness could be precisely controlled by adjusting the molar ratio of Pt to Pd. The ORR performance of the Pd@Pt NPs strongly depended on the thickness of their Pt shells. The Pd@Pt NPs with 0.94 nm Pt shells exhibited enhanced specific activity and higher durability compared to other Pd@Pt NPs and commercial Pt/C catalysts. Testing Pd@Pt NPs with 0.94 nm Pt shells in a membrane electrode assembly revealed a single‐cell performance comparable with that of the Pt/C catalyst despite their lower Pt content, that is the present NP catalysts can facilitate low‐cost and high‐efficient applications of PEMFCs.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Colorimetric signaling of Hg ions by a nitrobenzoxadiazole-appended cyclen-triester

A novel Hg²⁺-selective colorimetric sensor based on a cyclen–nitrobenzoxadiazole (NBD) conjugate was investigated. A cyclen derivative with three ester ligands was used as the binding site and the NBD moiety acted as the reporting chromogenic subunit. Interaction of 1 with Hg²⁺ ions resulted in a pronounced color change from pink to yellow, and fluorescence signaling was also possible. Selective colorimetric signaling of Hg²⁺ ions by NBD-functionalized cyclen with a detection limit of 1.5 × 10⁻⁶ M in aqueous environments was successfully achieved.     

Design,synthesis, and characterization of fullerene–peptide–steroid covalent hybrids

The present study reports the synthesis, spectral characterization, self-assembly properties, and preliminary in vitro study of antioxidant capacity of two triple covalent hybrids consisting of fullerene C₆₀, peptide, and steroidal moiety. Previously synthesized fulleropyrrolidinic acid and pregnenolone were connected by peptide linker using a multistep DCC/DMAP and/or EDC/HOBT esterification/amidation procedure. The hybrids were characterized by comparative analysis of spectroscopic data obtained from FTIR, UV–vis, HRMS, and extensive NMR experiments (¹H, ¹³C, COSY, HSQC, and HMBC). The self-assembling properties and morphology of triads samples prepared by drop-drying method were examined by scanning electron microscopy (SEM). Preliminary in vitro antioxidant activity was studied by Ferrous ion Oxidation-Xylenol orange (FOX) method.