Kinetics and Mechanistic Study of Acetaminophen‐Captopril Interaction by Electrochemical Methods

In this work kinetics parameters and electrochemical mechanism for electrooxidation of acetaminophen in the absence and presence of captopril in a condition close to acetaminophen natural oxidation pathway was investigated. The electrooxidation of acetaminophen in the presence of captopril was investigated by voltammetry and coulometry methods. The results of this work show that acetaminophen is oxidized to its respective p‐quinoneimine. The quinoneimine attacked by captopril, forms thioether. The proposed electrochemical mechanism is ECEC. The estimated value for homogeneous rate constant k_obs is 3.1×10⁴±155 M^?1s^?1 and k_f/k_b is 1.6×10⁸±8.0×10⁵.     

Ab Initio Study of the Various Pathways of the Decomposition ([2+2]elimination) of 2-Chloroethyltrichlorosilane

Abstract

The decomposition of 2-chloroethyltrichlorosilane (1) to ethylene-tetrachlorosilane (2), hydrogen chloride-ethylenetrichlorosilane (3), and ethylenechloride-trichlorosilane (4) was investigated using ab initio Molecular Orbital (MO) and Density Functional Theory (DFT). Study on the HF/6-31G level of theory revealed that the required energy for the decomposition of compound 1 to 2, 3, and 4 is 59.86, 101.13, and 63.29 kcal mol^?, respectively. MP2/6-31G*//HF/6-31G* calculated barrier height for the decomposition of compound 1 to 2, 3, and 4 is 60.59, 94.04, and 66.91 kcal mol^?1, respectively. Also, B3LYP/6-31G*//HF/6-31G* results indicate that the barrier height for the decomposition of compound 1 to 2, 3, and 4 is 51.71, 85.38, and 53.74 kcal mol^?1, respectively. Among the three methods, which have been used to calculate the barrier height of the decomposition of compound 1 to 2–4, B3LYP/6-31G**//HF/6-31G** is in good agreement with the reported experimental data. Contrary to the previously evaluated experimental values for the decomposition of compoun 1 to 3 and 4, all three methods predict a higher energy barrier for these reactions.     

Electrochemical Oxidation of Catechols in the Presence of Pyrimidine-2-thiol: Application to Electrosynthesis

The electrooxidation of catechols (1a–d) in the presence of pyrimidine-2-thiol (3) as a nucleophile in aqueous solution is described. The mechanistic investigations using cyclic voltammetry and controlled potential coulometry indicate that the quinone derived from catechols participates in a Michael addition reaction with pyrimidine-2-thiol to form corresponding catechol derivatives of 6a–d (ECEC). The efficient electrosynthesis of 6a–d has been performed at carbon rod electrodes in an undivided cell in good yield and purity.     

Hybrid-DFT Study and NBO Interpretation of the Configurational Behavior of 2-Halotetrahydrothiopyran S-Oxides

Abstract

Natural bond orbital (NBO) interpretation and hybrid density functional theory (hybrid-DFT: B3LYP/Def2-TZVPP)-based methods were used to investigate the impacts of the generalized anomeric effects (GAE), electrostatic, and steric interactions on the conformational properties of cis and trans isomers of 2-fluoro-, 2-chloro-, and 2-bromotetrahydrothiopyran S-oxide (1–3). The results obtained showed that the trans-axial configurations are the most stable forms of compounds 1–3. Based on the results obtained, the instability of the second lowest energy-minimum (cis-equatorial configuration, with axial S?O and equatorial C?X bonds, X = halogen atoms) increases from compound 1 to compound 3. This trend is also observed for the third lowest energy-minimum (i.e., the trans-equatorial configuration). Contrary to the trend observed for the cis- and trans-equatorial forms, the instability of the cis-axial form compared to the trans-axial form, increases from 1 to 2 but decreases slightly from 2 to 3. The correlations between the GAE, bond orders, steric effects, ΔG, Δμ, structural parameters, and conformational and configurational behaviors of compounds 1–3 have been investigated.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Estimation of homogeneous rate constants of reaction of electrochemically generated ortho‐benzoquinones with 1,3‐indandione

Electrochemical oxidation of some catechol derivatives has been studied in the presence of 1,3‐indandione as nucleophile in aqueous solution, by means of cyclic voltammetry and controlled‐potential coulometry. The results indicate the participation of electrochemically produced o‐benzoquinones in the Michael reaction with 1,3‐indandione to form the corresponding new catechol derivatives. On the basis of the EC mechanism, the observed homogeneous rate constants (k_obs) of reaction of produced o‐benzoquinones with 3‐indandione were estimated by comparing the experimental cyclic voltammograms with the digitally simulated results. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 605–613, 2007     

The Effect of Flower-Like Magnesium Hydroxide Nanostructure on the Thermal Stability of Cellulose Acetate and Acrylonitrile–Butadiene–Styrene

Flower-like magnesium hydroxide (Mg(OH)₂) nanostructures were synthesized via a simple hydrothermal reaction at relatively low temperature. The Mg(OH)₂ nanostructures were then added to acrylonitrile–butadiene–styrene (ABS) and cellulose acetate (CA) polymers. The effect of Mg(OH)₂ nanostructures on the thermal stability of the polymeric matrixes has been investigated. The thermal decomposition of the nanocomposites shifts towards higher temperature in the presence of the Mg(OH)₂. The enhancement of thermal stability of nanocomposites is due to endothermically decomposition of magnesium hydroxide that releases of water and dilutes combustible gases. Nanostructures and nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), differential thermal analysis (DTA), UL-94 test and limiting oxygen index (LOI) analysis.     

Hybrid-DFT Study and NBO Analysis of the Stereoelectronic Interaction Effects (Associated with the Anomeric Effects) on the Conformational Properties of 2,3,5,6-Tetrahalo-1,4-dioxanes and Their Analogs Containing S and Se Atoms

NBO analysis and hybrid density functional theory–based method (B3LYP/6-311+G**) was used to study the anomeric effects (AE), dipole–dipole interactions, and steric repulsion effects on the conformational properties of 2,3,5,6-tetrahalo-1,4-dioxane [halo = F (1), Cl (2), Br (3)], 2,3,5,6-tetrahalo-1,4-dithiane [halo = F (4), Cl (5), Br (6)], and 2,3,5,6-etrahalo-1,4-diselenane [halo = F (7), Cl (8), Br (9)]. B3LYP/6-311+G** results revealed a strong axial preference in compounds 1–3. Gibbs free energy difference (G _eq–G _ax) values (e.g., ΔG _eq-ax) between the axial and equatorial conformations of compound 1 to compound 3 are 8.19, 3.86, and 3.13 kcal mol^?1, respectively, as calculated by the B3LYP/6-311+G** level of theory. On the other hand, the NBO analysis of donor–acceptor (bond–antibond) interactions revealed that the AE for compounds 1–3 are ?12.26, ?16.46, and ?18.11 kcal mol^?1, respectively. Contrary to the increase of the AE values from compound 1 to compound 3, the increase of the steric repulsions (e.g., 1,3-syn-axial repulsions) could fairly explain the decrease of the axial conformation stability in compounds 1–3 compared to their equatorial conformations. Further, the correlations between the AE, structural parameters, and conformational behavior of compounds 4–9 have been investigated.     

Development of a needle trap device packed with titanium‐based metal‐organic framework sorbent for extraction of phenolic derivatives in air

We developed a novel method of needle trap device packed with titanium‐based metal‐organic framework for the extraction of phenolic derivatives in air followed by gas chromatography‐flame ionization detector analysis. The synthetized adsorbent was packed inside a 22‐gauge spinal needle. This method was first tested at laboratory scale, and then was used for field sampling of phenolic derivatives in air. A glass chamber placed on a heater at 60°C was used to provide different concentrations of phenolic derivatives. The desorption conditions and breakthrough volume were optimized using response surface methodology. The limit of detection and limit of quantitation of the proposed method were estimated to be in the range of 0.001–0.12 and 0.003–0.62 ng/mL, respectively, indicating a high sensitivity for the suggested sampler. Storing the packed needle trap device in a refrigerator at 4?C for 60 days did not dramatically affect the storage stability. Our findings indicated that there was a high correlation coefficient (R² = 0.99) between the measurement results of this method and the NIOSH recommended method (XAD‐7 sorbent tube). Therefore, it can be concluded that the needle trap device packed with titanium‐based metal‐organic framework can be used as a efficient method for extraction of phenolic derivatives in air.